EQUIPMENT
2005 4-Star Trailers Horse Trailer Recalls
Safety recall campaigns filed with NHTSA that cover this model year
Data refreshed
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecall campaigns
2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is
EQUIPMENT
What a recall is
- Safety recall
- A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
- Safety investigation
- NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
- Manufacturer communication
- Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.
LOOSE AXLE HARDWARE
ODI DISCOVERED THIS PROBLEM DURING A SERVICE BULLETIN REVIEW.ON JULY 21, 2005, 4-STAR FORWARDED ODI A COPY OF A SERVICE LETTER RECENTLY SENT TO THEIR DEALERS AND OWNERS ADVISING THEM OF THE IMMEDIATE NEED TO INSPECT AND RETORQUE THE MOUNTING BRACKET BOLTS ON THE AXLE SUSPENSION.A LINE TECHNICIAN DISCOVERED THE PROBLEM WHEN HE NOTICED THAT THE BOLTS INSTALLED ON THE AXLE WERE NOT APPROPRIATELY TORQUED. ODI'S INVESTIGATION PROMPTED 4-STAR TO FURTHER EXAMINE THE AXLE CONFIGURATION AND ITS ATTACHING HARWARE.4-STAR HAS NOW CONCLUDED THAT THE SERVICE BULLETIN WAS ERRONEOUS FOR THE FOLLOWING REASONS: STARTING WITH THE FIRST PRODUCTION TRAILER, A BRACE BAR WAS WELDED TO THE TRAILER'S FRAME TO ADD STABILITY TO THE FLOOR OF THE TRAILER.THE BAR WAS THEN BOLTED TO BRACKETS WITH LOCK NUTS AND THE BRACKETS WERE THEN WELDED TO THE AXLES.THEREFORE, THE ADDED STRENGTH SUPPLIED BY THE WELDS MAKES THE AMOUNT OF TORQUE IRRELEVANT.AT ODI'S REQUEST,4-STAR PROVIDED DATA AND EXAMINED TRAILERS FROM EACH MODEL YEAR AND PROVIDED DOCUMENTATION THAT SUPPORTS THEIR CLAIM.( CONTINUES ON PAGE 2)
Elsewhere on this vehicle
Data sources
- NHTSA Office of Defects Investigation — recall campaigns and safety investigations
Data on this page last refreshed .