SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
2019 Acura ILX Recalls
Safety recall campaigns filed with NHTSA that cover this model year
Data refreshed
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecall campaigns
5 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
POWER TRAIN:DRIVELINE:DRIVESHAFT
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
What a recall is
- Safety recall
- A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
- Safety investigation
- NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
- Manufacturer communication
- Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.
Loss of braking force
On October 23, 2025, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE25015 after receiving complaints concerning a loss of brake assist in 2019-2020 MY Acura ILX vehicles. These complainants alleged master cylinder failures resulting in soft pedal feel or the brake pedal intermittently going to the floor. These failures could result in extended braking distance increasing the risk of a crash. Honda found that residual plasticizer in the brake reservoir hose could contaminate the brake fluid. This contaminated brake fluid was then absorbed by the secondary cup seal, causing it to swell. Engine heat during operation could further expand the swollen seal, allowing brake fluid to pass. Brake fluid bypassing the master cylinder cup seals can reduce brake-pedal firmness and increase stopping distance. On April 08, 2026, Honda filed Recall 25V-859, recalling all 2016-2020 MY Acura ILX vehicles produced from October 9, 2014, to January 29, 2020. Under the recall, the dealer will replace the brake master cylinder with redesigned inner cup seals made of a different material, providing improved sealing capability. In view of Honda filing Recall 25V-859 addressing the subject of this investigation, ODI is closing this Preliminary Evaluation. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Elsewhere on this vehicle
Data sources
- NHTSA Office of Defects Investigation — recall campaigns and safety investigations
Data on this page last refreshed .