RoadVitals

1997 Acura Slx Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Jun 3, 1997
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

97V092002

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Jun 3, 1997
873 units potentially affected
The defect: THE LEFT FRONT BRAKE LINES WERE INSTALLED IMPROPERLY AT THE ASSEMBLY LINE RESULTING IN INSUFFICIENT CLEARANCE BETWEEN THE BRAKE LINE AND AN UPPER CONTROL ARM OF THE SUSPENSION.
The risk: THE LINE CAN BE DAMAGED DURING VEHICLE OPERATION AND CAN RESULT IN BRAKE FLUID LEAKAGE, REDUCED BRAKE EFFECTIVENESS, AND INCREASED STOPPING DISTANCES.
The remedy: DEALERS WILL INSPECT THE CLEARANCE BETWEEN THE BRAKE LINE AND THE UPPER CONTROL ARM. IF THE CLEARANCE IS NOT ACCORDING TO SPECIFICATIONS, THE BRAKE LINE WILL BE REPLACED.
AMERICAN HONDA MOTOR CO.View on NHTSA.gov
97V035002

SUSPENSION

Mar 11, 1997
123 units potentially affected
The defect: THESE VEHICLES WERE MANUFACTURED WITHOUT A LOCK WASHER AND/OR SCREWS IN THE FRONT HUB.
The risk: THE BEARING ADJUSTMENT NUT CAN LOOSEN, RESULTING IN TOO MUCH FREE PLAY BETWEEN THE WHEEL AND AXLE. THE BEARING CAN SEIZE, CAUSING THE WHEEL TO LOCK AFFECTING VEHICLE DIRECTIONAL CONTROL INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSPECT THE FRONT HUBS TO DETERMINE IF THE LOCK WASHER AND SCREWS WERE PROPERLY INSTALLED. IF NOT, THEY WILL MAKE THE NECESSARY REPAIRS.
AMERICAN HONDA MOTOR CO.View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .