RoadVitals

2009 Autocar Wx Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
6
Newest Jan 23, 2023
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

6 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

23V023000

PARKING BRAKE

Jan 23, 2023
11,353 units potentially affected
The defect: Autocar, LLC (Autocar) is recalling certain 2012-2016 Xpert, 2010-2020 Xspotter, 2008-2020 Xpeditor, 2008-2010 WXLL and WX vehicles. A worn parking brake control valve can leak air into the vent line, creating excessive back pressure and causing the parking brake to release unexpectedly.
The risk: The unexpected release of the parking brake may allow the vehicle to rollaway, increasing the risk of a crash.
The remedy: Dealers will remove the vent line and fitting from the valve, free of charge. Owner notification letters were mailed March 23, 2023. Owners may contact Autocar customer service at 1-888-218-3611. Autocar's number for this recall is ACX-2023 ACTT-2301.
Autocar, LLCManufacturer number ACX-2303 ACTT-2301View on NHTSA.gov
14V132000

ENGINE AND ENGINE COOLING:ENGINE

Mar 19, 2014
4,192 units potentially affected
The defect: Autocar, LLC (Autocar) is recalling certain model year 2008-2014 ACX, WX, and WXLL vehicles manufactured July 30, 2007, through February 10, 2014, and equipped with certain Cummins Westport Model ISL G or ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor.
The risk: The improper operation of the sensor could induce elevated exhaust temperatures or flames from the exhaust pipe, increasing the risk of a vehicle fire or burn injury to a person near the exhaust pipe.
The remedy: Cummins Inc. and Cummins Wesport Inc. will notify owners, and authorized Cummins service facilities will upload a new ECM calibration, free of charge. The recall began on April 12, 2014. Owners may contact Autocar at 1-765-489-5499 or Cummins Inc. at 1-800-343-7357. Autocar's number for this recall is A-1402.
Autocar, LLCManufacturer number A-1402View on NHTSA.gov
13V184000

SERVICE BRAKES, AIR

May 8, 2013
82 units potentially affected
The defect: Autocar, LLC is recalling certain model year 2005-2013 ACX, WX, and WXLL trucks built November 16, 2004, through September 10, 2012. On the affected vehicles, the air brake systems were built without the required air tank drain valve. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 121, "Air Brake Systems."
The risk: Air tanks with valves omitted will not drain if moisture is introduced into the tank, potentially reducing air capacity in the air brake system, which could cause a reduction in brake performance and equipment durability, thus increasing the risk of a crash.
The remedy: Autocar will notify owners, and dealers will repair the vehicles free of charge. The recall began on June 27, 2013. Owners may contact Autocar at 1-765-489-5499. Autocar's recall campaign number is A-1302.
Autocar, LLCManufacturer number A-1302View on NHTSA.gov
10V045000

STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS

Feb 18, 2010
1,969 units potentially affected
The defect: AUTOCAR IS RECALLING CERTAIN MODEL YEAR 2007-2009 WX AND WXR HEAVY DUTY CLASS 8 LCOE VEHICLES. THE AFFECTED VEHICLES MAY DEVELOP CRACKS IN THE TOP FLANGE OF THE FRONT FRAME RAIL EXTENSION. OVER TIME, THE CRACK MAY PROPAGATE ACROSS THE EXTENSION BRACKET, POTENTIALLY CAUSING THE EXTENSION BRACKET TO DEFORM UNDER LOAD. THESE TIRES ARE ALL ASYMMETRICAL TREAD PATTERNS WITH "OUTER" INDICATED ON THE OUTSIDE SIDEWALL. THE OUTSIDE SIDEWALL CONTAINS THE FULL TIRE IDENTIFICATION NUMBER INCLUDING THE PRODUCTION DATE CODE.
The risk: THIS MAY COMPROMISE THE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH.
The remedy: AUTOCAR WILL NOTIFY OWNERS AND REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 19, 2010. OWNERS MAY CONTACT AUTOCAR AT 1-765-489-5499.
AUTOCAR, LLCManufacturer number A-1001View on NHTSA.gov
09V060000

PARKING BRAKE:DRIVELINE:AIR

Feb 19, 2009
690 units potentially affected
The defect: AUTOCAR IS RECALLING 690 MY 2008-2009 ACX, WX AND WXLL HEAVY DUTY CLASS 8 VEHICLES EQUIPPED WITH QUICK RELEASE VALVES (QRV). THERE ARE QRV'S IN TWO AREAS OF THE VEHICLE. THE FIRST IS IN THE LIFT AXLE AIR LINES. A LEAK IN THAT QRV WOULD AFFECT THE RATE AT WHICH THE TAG/PUSHER AXLE IS LOWERED/LIFTED. THE SECOND IS IN THE PARK BRAKE AIR LINES. A LEAK IN THAT QRV WOULD RELEASE PRESSURE ON THE PARK BRAKE SPRINGS; IF THE LEAD IS LARGE ENOUGH, THE PRESSURE WILL DROP AND SET THE BRAKES ON THE REAR AXLE.
The risk: DRIVERS WOULD NOT BE AWARE OF BRAKE SYSTEM FAILURE AND BRAKING CAPABILITY WOULD NOT BE POSSIBLE, INCREASING THE RISK OF A CRASH.
The remedy: AUTOCAR WILL NOTIFY OWNERS AND PROVIDE INSTRUCTIONS FOR SCHEDULING REPAIR OF THE VEHICLE AT AN AUTHORIZED AUTOCAR SERVICE FACILITY, AT NO COST TO THE VEHICLE'S OWNER. THE RECALL BEGAN ON APRIL 9, 2009. OWNERS MAY CONTACT AUTOCAR AT 1-765-489-5499.
AUTOCAR, LLCManufacturer number A-0901View on NHTSA.gov
08V566000

STEERING:GEAR BOX:SHAFT SECTOR

Oct 28, 2008
127 units potentially affected
The defect: AUTOCAR IS RECALLING 127 MY 2008-2009 ACX, WX, AND WXLL HEAVY DUTY CLASS 8 TRUCKS. INSUFFICIENT TORQUE WAS APPLIED DURING THE ASSEMBLY PROCESS TO THE NUT ON THE PINCH BOLT THAT SECURES THE LOWER STEERING SHAFT TO THE STEERING GEAR BOX. IT WAS FOUND THAT THE TORQUE CONTROLLED TOOL WAS CALIBRATED TO A LOWER TORQUE RATING THAN SPECIFIED FOR THE APPLICATION.
The risk: IF THE STEERING BOLT WERE TO LOOSEN, THE DRIVER WOULD EXPERIENCE LOSS OF STEERING CONTROL INCREASING THE RISK OF A CRASH.
The remedy: AUTOCAR WILL PROVIDE INSTRUCTIONS TO OWNERS FOR SCHEDULING REPAIR OF THE VEHICLES. DEALERS WILL TORQUE THE STEERING KNUCKLE BOLT TO THE CORRECT SPECIFICATIONS FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 25, 2008. OWNERS MAY CONTACT AUTOCAR AT 1-765-489-5499.
AUTOCAR, LLCManufacturer number A-0805View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE20003ClosedPreliminary Evaluation

Vehicle Roll Away

Opened Apr 1, 2020
Closed Jan 10, 2024

On April 1, 2020, following information received from the Office of Defects Investigation (ODI) network of fleet contacts, ODI opened PE20-003 to investigate reports of vehicle roll away in certain model year (MY) 2008-2020 Autocar and Mack refuse trucks equipped with certain Bendix PP-1 push-pull pneumatic park brake control valves with a pipe-away exhaust configuration. Prior to ODI’s investigation,[KK(1]  Bendix Commercial Vehicle Systems LLC (Bendix), the subject component manufacturer, published two related technical service bulletins (TSBs): Bendix Push-Pull Type Control Valves Service Data SD-03-3611 Rev. 007 (2019-03) and Bendix PP-1 & PP-8 Park Control Valve Wear and Replacement Notice Technical Bulletin TCH-003-056 (2019-11-20). ODI sent Information Request (IR) letters to motor vehicle manufacturers Autocar LLC (Autocar) and Volvo Trucks North America/Mack Trucks, Inc. (Volvo/Mack) and motor vehicle equipment manufacturer Bendix. IR response data from all three manufacturers was analyzed and cross-referenced to gain further understanding. To date, ODI is aware of 5 vehicle roll-away incidents related to the alleged defect condition in the subject vehicles equipped with the subject components, resulting in 4 crashes and 1 injury. On December 9, 2021, Volvo/Mack notified the agency of a safety recall (21V953) to address a safety defect in certain MY 2008-2019 TerraPro (MRU) and MY 2019-2022 TerraPro (TE) trucks originally equipped with the subject components. [KK(2] On January 1, 2023, Autocar notified the agency of a safety recall (23V023) to address a safety defect in certain MY 2008-2020 ACX (Xpeditor), MY 2012-2020 ACMD (Xpert), MY 2010-2020 ACTT (Xspotter), MY 2008-2010 WX and MY 2008-2010 WXLL trucks. Volvo/Mack and Autocar's recall remedies involve removing the vent line fitting threaded into the exhaust port of the subject PP-1 valve. [VD(3] Both Autocar and Mack have stopped equipping new refuse trucks with park control valves using the exhaust pipe-away configuration. After discussions between ODI and Bendix concerning ways to prevent new PP-1 valves from being sold and installed with a potential for the exhaust to become restricted, Bendix will take the following actions: 1) issue a letter to all original equipment (OE) customers with important safety information warning them about the safety risk of attaching plumbing to the exhaust port when the subject component is used as a park control valve; and 2) affix a warning label on all aftermarket parts warning not to install pipe-away exhaust port plumbing. In view of the recalls being conducted by Volvo/Mack and Autocar, and the actions taken by Bendix, ODI has closed this Preliminary Evaluation. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist in equipment or other model or MY vehicles that have not been recalled. The agency reserves the right to take further action if warranted.

PARKING BRAKELed to recall 21V953

Elsewhere on this vehicle

Data sources