2020 BMW M340I Owner Complaints

Component Involved:Engine Mechanical / Variable-Displacement Engine Oil Pump (Part #11418635032 / Updated #11419895359) Description of Safety Hazard / Defect:The early-generation B58TU engine features a variable-displacement oil pump equipped with an internal thermoplastic (plastic) adjusting ring. Due to continuous thermal cycling and mechanical stress, this plastic ring is prone to cracking and shattering without warning.When this internal component disintegrates, it causes an immediate loss of oil pressure to critical engine components. This creates a severe safety hazard, as the vehicle can experience a sudden loss of motive power or complete engine seizure while travelling at highway speeds, placing the occupants and surrounding traffic at immediate risk of a collision.Furthermore, a known software bug or sensor interference tied to this specific mechanical failure prevents the iDrive system from successfully completing an electronic oil level measurement, thereby masking the impending failure from the driver until catastrophic engine failure occurs.Relevance of International Actions:In May 2026, BMW Korea officially acknowledged this identical component design flaw by launching a proactive, free preventative repair campaign for B58TU engines manufactured between January 2019 and June 2021. BMW is actively replacing the defective plastic-ring oil pumps with an updated, all-metal version in that market.North American consumers are driving vehicles equipped with the exact same defective part, manufactured during the same window, and facing the same catastrophic safety risks. I am requesting that the agency open a formal defect investigation into BMW North America to mandate a safety recall or an extended component warranty program.

NHTSA ID

11754090

Incident

Mar 1, 2026

Safety Hazard: Oil Pump Failure Leading to Sudden Engine Stall (BMW B58TU engines) Description of Defect: The oil pump module in the 2020 BMW M340i (G20) and many other models between 2019-2020 contains internal plastic components that are prone to thermal degradation and premature failure. These plastic parts can crack or disintegrate, causing a sudden loss of oil pressure. BMW corrected this in later models with metal parts but failed to issue a recall or the older models containing plastic parts. Safety Risk: A failure of the oil pump leads to insufficient lubrication of critical engine components, which can result in a sudden and complete engine seizure while the vehicle is in motion. This causes an immediate loss of propulsion and power steering assist, significantly increasing the risk of a high-speed collision or being stranded in dangerous traffic conditions. Additional Note: This is a known mechanical defect where a critical engine component (oil pump) relies on non-durable plastic materials, creating an unreasonable safety risk for drivers and passengers due to potential catastrophic engine failure without prior warning.

NHTSA ID

11750244

Incident

Jul 14, 2026

I am submitting this complaint regarding a potential safety defect involving the engine lubrication system on my 2020 BMW M340i with the B58 engine. The vehicle was purchased used from a single owner with low mileage and comprehensive maintenance records, with no indication of prior engine or lubrication issues. While traveling at highway speed, the vehicle suddenly displayed a low oil pressure warning and simultaneously entered a protective shutdown strategy, resulting in a significant loss of engine power. This forced me to rapidly slow down and merge across multiple lanes of traffic to reach the shoulder, creating a dangerous situation with a substantial risk of a rear-end or multi-vehicle collision. There were no warning lights, fault messages, drivability concerns, or other symptoms before this incident. According to the authorized BMW dealership that inspected the vehicle, the engine experienced an oil pump failure that caused a loss of oil pressure, resulting in internal engine damage. The dealership found metal shavings in the engine oil and recommended complete engine replacement rather than repairing the oil pump due to the extent of the damage. The vehicle and failed components are available for inspection upon request. Based on the dealership's diagnostic findings, there were no stored oil pressure fault codes prior to the failure; the only oil pressure warning occurred at the time the engine lost power. I am concerned that this indicates the vehicle did not provide meaningful advance warning before a catastrophic failure occurred. I believe this may represent a defect in the oil pump assembly that warrants investigation. I have seen many reports from other owners discussing failures involving the B58 oil pump assembly, including concerns about an internal plastic component that many owners proactively replace with an aftermarket metal component to reduce the risk of failure. This failure posed an incredible safety risk to me and others on the road.

NHTSA ID

11748524

Incident

May 23, 2026

Engine oil pump is failing. Early production 2019-2020 model years are made of plastic which can crack and break resulting in engine failure while driving. This is a well documented issue regarding the BMW B58 Engine (2nd Generation) They have since updated the engine oil pump part to a durable metal pump on newer models leaving the older ones with the bad part with no resolution. The vehicle no longer measures the oil level and is a symptom of the pump starting to fail. There is no telling when it may go out and it will be too late at that point as it results in complete engine failure/seizure while driving without proper pressure and lubrication. The local BMW Dealer says they are unable to help as BMW does not have a recall or technical service bulletin addressing this issue leaving owners with this plastic oil pump to pay out of pocket when this part fails destroying the motor. This is a critical safety hazard as the motor may shut off or malfunction at any given time while driving. The vehicle may produce a warning light or malfunction codes via the OBD, but at that point may be too late as the damage has already occurred. My independent bmw mechanic has also stated he sees many cars within this model year timeframe facing this issue as they age outside of the warranty period quoting $5K+ to ensure safety and fix this issue properly with the updated metal part. This is ridiculous as these cars by now are outside of the factory warranty period of 4 years and 50,000 miles. My vehicle does not measure the oil anymore even after a oil change leaving a big question mark of whether there is the proper amount of oil to lubricate the engine or not. I have attached pictures of the plastic oil pump showing cracks and breaks as well as the updated fully metal oil pump. There is no peace of mind when driving this vehicle due to this issue.

NHTSA ID

11737366

Incident

May 8, 2026

Component: Front differential / xDrive drivetrain system. Vehicle is available for inspection upon request. Description: My 2020 BMW M340i xDrive has exhibited a persistent whining noise from the front drivetrain since approximately 38,000 miles. The noise varies with speed and load and appears to originate from the front differential. A BMW dealership inspected the vehicle and acknowledged the noise but declined repair under warranty. This condition is consistent with premature wear of internal differential components such as gears or bearings, or improper lubrication. Differentials should not produce whining noises at this mileage, indicating a potential defect. Safety Risk: The front differential is critical to torque distribution in the all wheel drive system. Progressive failure could result in drivetrain binding, uneven torque delivery, or loss of AWD functionality. In a worst case scenario, partial or full differential seizure could occur, leading to sudden resistance, instability, or loss of control. These risks are heightened at highway speeds or in low traction conditions such as rain or snow. The vehicle provides no warning lights or messages despite the abnormal condition, meaning failure could occur without advance notice. Inspection: Issue confirmed by BMW dealership. No repair or corrective action performed. Warnings/Symptoms: No warning lights or system messages. Only symptom is a persistent whining noise from the front drivetrain. Additional Information: I am aware of similar complaints from other BMW xDrive owners reporting drivetrain whining, grinding, and vibration, suggesting a broader pattern of premature differential wear.

NHTSA ID

11731034

Incident

Sep 1, 2023

Safety Hazard: Oil Pump Failure Leading to Sudden Engine Stall (BMW B58TU engines) Description of Defect: The oil pump module in the 2020 BMW M340i (G20) contains internal plastic components that are prone to thermal degradation and premature failure. These plastic parts can crack or disintegrate, causing a sudden loss of oil pressure. Increasing wear on internal engine components and even leading to irreversible engine damage. Safety Risk: A failure of the oil pump leads to insufficient lubrication of critical engine components, which can result in a sudden and complete engine seizure while the vehicle is in motion. This causes an immediate loss of propulsion and power steering assist, significantly increasing the risk of a high-speed collision or being stranded in dangerous traffic conditions. Additional Note: This is a known mechanical defect where a critical engine component (oil pump) relies on non-durable plastic materials, creating an unreasonable safety risk for drivers and passengers due to potential catastrophic engine failure without prior warning. BMW is aware of this defect as they chose to update the design in future models, switching from the brittle plastic to more metal components in the updated design. This shows clearly that this design is compromised and was a risk to continue implementing.

NHTSA ID

11730475

Incident

Feb 10, 2026

Oil pump failure

NHTSA ID

11727567

Incident

Mar 27, 2026

I’ve been doing research for this particular issue on the 2020 bmw m340i (B58 engine). There is a plastic housing on the oil pump that seems to completely collapse due to consistent heat cycles (starting the vehicle). As far as I know that common symptoms include not being able to read oil levels and this is what commonly shows a faulty or unreliable oil pump that could potential cause a oil leak into engine where it gets hot and cause a fire. This is extremely dangerous and only the vehicles made from 2019-2020 have this plastic part that should be recalled from factory.

NHTSA ID

11727385

Incident

May 14, 2025

Engine failed suddenly while driving on a highway. While driving at highway speed, warning lights and messages appeared indicating oil pressure is low and to turn off the engine immediately. The vehicle was towed to the shop where it was discovered that the oil pump, which was made out of plastic, had suffered a catastrophic failure. Was told if the engine continued running any longer it would have seized which could pose a very serious safety issue when at highway speeds. The vehicle had 55,000 miles at time of failure. Repairs totaled nearly $6,000 including towing and rental with a month of lost vehicle use. The failed oil pump was retained.

NHTSA ID

11726317

Incident

Dec 19, 2025

I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs commonly exceed $6,000–$8,000 for just the pump, assuming the motor is unharmed. Owners are currently unable to determine whether their vehicles contain the original thermoplastic oil pump design or a later revised version utilizing metal internal components, as VIN-based parts information now identifies updated components in the car even when no replacement has occurred and the old components are actually in the car. Also, BMW has actively removed the plastic part number out of all dealer networks as well.

NHTSA ID

11725310

Incident

Mar 18, 2026

EXHIBITING SIGNS OF NOT BEING ABLE TO READ OIL LEVELS WHICH IS A POTENTIAL SIGN OF OIL PUMP FAILURE DUE TO PLASTIC INTERNAL COMPONENTS THAT HAS OCCURED IN 2020 MODELS.

NHTSA ID

11724900

Incident

Mar 17, 2026

I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs commonly exceed $6,000–$8,000 for just the pump, assuming the motor is unharmed. Owners are currently unable to determine whether their vehicles contain the original thermoplastic oil pump design or a later revised version utilizing metal internal components, as VIN-based parts information now identifies updated components in the car even when no replacement has occurred and the old components are actually in the car. Also, BMW has actively removed the plastic part number out of all dealer networks as well.

NHTSA ID

11721301

Incident

Mar 1, 2026

Oil pump is made of plastic causing it to fail after a certain time and can lead to a total engine loss if not swapped out with BMW’s updated oil pump. They are aware of the issue but neglecting to handle the problem.

NHTSA ID

11721171

Incident

Feb 27, 2026

Oil pump in B58 BMW engines 2019-2022 has been a major safety concern that results in catastrophic failure while driving the vehicle. All because of BMW using a plastic component and quietly changed it, meanwhile hundreds of people had a major oil leak and engine seizures on hwy and $5k+ repairs.

NHTSA ID

11721135

Incident

Mar 4, 2025

Oil Pump Failed its common issue on them but no recall

NHTSA ID

11721090

Incident

Feb 27, 2026

The ignition start is not clean and delayed. There is already a recall 25V-644. There is "No remedy available" for this model per inquiry with local BMW dealer in Buffalo NY 14221 made 3 weeks ago. I am fearful of an electrical fire from overheating. I do smell an intermittent burning smell but it may in the outside environment rather than from under my hood.

NHTSA ID

11718142

Incident

Jan 1, 2026

The contact owns a 2020 BMW M340I. The contact stated that after an oil change was performed by an independent mechanic, there was a large amount of gray smoke coming from the exhaust pipe while accelerating from a complete stop. There was no warning light illuminated during the failure. The vehicle was taken to various independent mechanics, and the failure was associated with the PCV (Positive Crankcase Ventilation) valve cover. The contact stated that there was a recall on other model vehicles for the failure; however, neither the VIN nor the model vehicle was included in the recall. The manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was approximately 46,500.

NHTSA ID

11714559

Incident

Dec 1, 2025

Mileage

46,500 mi

The contact owns a 2020 BMW M340I. The contact stated that upon starting the vehicle, the contact noticed a thick white smoke coming out of the exhaust pipes. In addition, the contact stated that there was an abnormal ticking sound coming from the engine while idling. There was no warning light illuminated. The vehicle had not yet been diagnosed or repaired. The manufacturer had yet to be notified of the failure. The failure mileage was approximately 82,500.

NHTSA ID

11707622

Incident

Dec 1, 2025

Mileage

82,500 mi

My oil pump went out causing Low pressure codes and resulting in me paying over 2 grand to get it repaired, They super seeded the oil pump they used to use with a new one and theirs many other reports online etc of the 2020 bmw m340 oil pump going out due to plastic internals which can lead to engine failure .

NHTSA ID

11697131

Incident

Sep 17, 2025

Oil pump common issue of made out plastic cause miss interpretation of oil pressure. Developing engine issues under 50k miles

NHTSA ID

11690406

Incident

Jul 4, 2025

Hi. I’d like to point out I have not had an incident YET thankfully. However, I want to highlight that the early M340i production releases (2019 and 2020) are HIGHLY likely to experience catastrophic engine failure due to an oil pump being made of plastic on some models. Of the 20 or so complaints listed under this vehicle on NHTSA, I’ve already seen PLENTY of complaints regarding this issue and people actually experiencing this issue. I believe if a car has a fair chance of causing catastrophic damage to its engine on its own, it poses as a safety risk for anyone in or around the car. The fix is to spend $6000-$7000 to have the oil pump replaced with the new 2021 oil pump, but most normal people cannot afford that easily and are driving around with plastic pumps still hoping for the best. I don’t understand how so many complaints of the same safety issue on this website for this vehicle (and other vehicles, which have the same B58 engine) have not resulted in a recall. Hopefully this can change because a car destroying itself shouldn’t be taken lightly and I’d like to second what everyone else on here is saying about the oil pump issue.

NHTSA ID

11689265

Incident

Sep 23, 2025

The contact owns a 2020 BMW M340I. The contact stated that while merging onto the highway and accelerating, there was an abnormally loud banging sound coming from the vehicle before the vehicle stalled. The contact was able to coast forward. There were no warning lights illuminated. The contact removed the panels, and there was metal falling out. The contact stated that there was a sizable hole in the engine, and metal was showing from the cam plate and oil pump. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted regarding recalls and warranty coverage but it was recommended that the contact call the NHTSA Hotline for assistance. The approximate failure mileage was 59,015.

NHTSA ID

11686855

Incident

Sep 9, 2025

Mileage

59,015 mi

Electronic parking brake malfunction, disengage ineffective. Ongoing 2020 BMW mechanical issue, multiple dealer submissions, BMW refuses to open active recall. BMW requires $3,000 center panel replacement, out-of-pocket.

NHTSA ID

11684702

Incident

Aug 25, 2025

The contact owns a 2020 BMW M340I. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 24V576000 (Electrical System, Engine and Engine Cooling); however, the repair failed to prevent the failure from occurring. The contact stated that shortly after the recall repair was completed, the vehicle hesitated to start. The contact stated that several employees at the local dealer attempted to start the vehicle. The vehicle started; however, several months later, the failure reoccurred. An appointment with the dealer was scheduled to inspect the vehicle. The vehicle was not repaired and needed to be towed. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 28,162.

NHTSA ID

11659699

Incident

Feb 15, 2025

Mileage

28,162 mi

My vehicle doesn’t read the oil level since the fuel pump that BMW used to manufacture the car is made out of plastic material. There has been hundred of complaints about the same issue with the oil pump not working properly due to the fact that BMW used plastic instead of metal etc. I would like for the NHTSA to take a look at this issue and please consider making it a recall for the users that are having this “Oil Pump” issue please thank you.

NHTSA ID

11658972

Incident

Dec 25, 2024