RoadVitals

1999 BMW R1100 S Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Aug 24, 2001
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

01V272000

FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

Aug 24, 2001
1,090 units potentially affected
The defect: VEHICLE DESCRIPTION: MOTORCYCLES. THE FLEXIBLE FUEL HOSE LEADING FROM THE FUEL DISTRIBUTOR CAN CHAFE AGAINST THE RIGID LINES OF THE FUEL FEED AND THE RETURN LINES. CONTINUED CHAFING OF THE FLEXIBLE FUEL HOSE CAN LEAD TO FUEL LEAKAGE.
The risk: FUEL LEAKAGE, IN THE PRESENCE ON AN IGNITION SOURCE, COULD RESULT IN A FIRE.
The remedy: DEALERS WILL REPLACE THE RIGHT SIDE FLEXIBLE HOSE WITH ONE WITH A BRAIDED COVER TO PREVENT CHAFING. OWNER NOTIFICATION BEGAN OCTOBER 16, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117, OPTION #5.
BAYERISCHE MOTOREN WERKEView on NHTSA.gov
00V318000

STEERING: STEERING WHEEL/HANDLE BAR

Oct 11, 2000
718 units potentially affected
The defect: VEHICLE DESCRIPTION: MOTORCYCLES EQUIPPED WITH HIGH-MOUNTED HANDLEBARS. THE HIGH-MOUNTED HANDLEBARS ARE POSITION ON TOP OF THE UPPER FORK CLAMP AND ARE CLAMPED TO THE TOP OF EACH UPPER FORK TUBE. IT IS POSSIBLE FOR A HANDLEBAR TO ROTATE FORWARD.
The risk: IF THIS WERE TO OCCUR WHILE RIDING, THE RIDER'S BALANCE COULD BE UPSET AND A CRASH AND PERSONAL INJURY COULD RESULT.
The remedy: DEALERS WILL DEGREASE THE CLAMPING CONNECTION PARTS, REWORK THE POSITIONING TAB (IF NECESSARY) TO FIT PROPERLY IN THE CORRESPONDING GAP IN THE UPPER FORK CLAMP, AND RESET THE TORQUE OF THE CLAMPING CONNECTIONS.
BAYERISCHE MOTOREN WERKEView on NHTSA.gov
00V144000

SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES

May 18, 2000
474 units potentially affected
The defect: VEHICLE DESCRIPTION: MOTORCYCLES. DUE TO USE OF AN INCORRECT THREAD-LOCKING MATERIAL IN PRODUCTION, IT IS POSSIBLE FOR THE REAR BRAKE LINKAGE BALL END, WHICH IS SCREWED INTO THE REAR BRAKE LEVER, TO LOOSEN AND EVENTUALLY DETACH FROM THE LEVER.
The risk: IF THIS HAPPENS, THE REAR BRAKE COULD NO LONGER BE APPLIED, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REMOVE THE BRAKE LINKAGE BALL END FROM THE BRAKE LEVER AND REINSTALL IT WITH A DIFFERENT THREAD-LOCKING COMPOUND, TO PREVENT THE BALL END FROM LOOSENING.
BAYERISCHE MOTOREN WERKEView on NHTSA.gov
98V294000

FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

Nov 10, 1998
700 units potentially affected
The defect: VEHICLE DESCRIPTION: MOTORCYCLES. IF THE ENGINE BACKFIRES DURING THE STARTING PROCESS, IT IS POSSIBLE FOR EITHER THROTTLE BODY TO LOOSEN IN ITS MOUNT, OR TO DISCONNECT FROM ITS MOUNT. IF THIS HAPPENS, THE FUEL LINE COULD BE DAMAGED OR THE LINE AND INJECTOR COULD SEPARATE FROM EACH OTHER, CAUSING FUEL LEAKAGE.
The risk: FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
The remedy: DEALERS WILL REPLACE THE FUEL DISTRIBUTION UNIT. IN ADDITION, THE CONNECTION BETWEEN THE THROTTLE BODY AND THE AIR INLET TUBE WILL BE SECURED WITH TWO SCREWS TO PREVENT DAMAGE TO THE HOSE OR INJECTOR SHOULD A BACKFIRE OCCUR.
BAYERISCHE MOTOREN WERKEView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .