RoadVitals

2020 Braun Ambulances Express Plus Type I Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Feb 1, 2024
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

24V063000

ELECTRICAL SYSTEM:WIRING

Feb 1, 2024
628 units potentially affected
The defect: Braun Ambulances (Braun) is recalling certain 2020-2023 Chief XL I, Express Plus I, Chief XL III, Liberty I, Super Chief I, Signature Series III, Signature Series I, and 2020-2024 Express III emergency vehicles equipped with Weldon 8X16 Input-Output nodes. In the event of a short circuit or wiring failure, the firmware in the node may fail to shut off the output pin, resulting in overloaded electrical circuits.
The risk: Overloaded electrical circuits can overheat, increasing the risk of fire.
The remedy: Weldon will update the firmware, free of charge. Owner notification letters were mailed February 28, 2024. Owners may contact Akron Brass customer service at 1-800-228-1161 or Braun customer service at 1-800-488-0359. Braun's number for this recall is 2024-01.
Braun AmbulancesManufacturer number 2024-01View on NHTSA.gov
23V331000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

May 9, 2023
35 units potentially affected
The defect: Braun Ambulances (Braun) is recalling certain 2019-2023 Chief XL Type I, Express Plus Type I, and Liberty Type I ambulances built on Chevrolet medium and heavy-duty chassis. The Liquid Spring suspension systems may come in direct contact with the right rear brake line, causing excessive wear and possibly resulting in the loss of the rear brakes.
The risk: The loss of rear brake function can increase the risk of a crash.
The remedy: Dealers will replace and reroute the rear brake lines, free of charge. Owner notification letters were mailed May 19, 2023. Owners may contact Braun customer service at 1-866-305-8402. Braun's number for this recall is 2023-01.
Braun AmbulancesManufacturer number 2023-01View on NHTSA.gov
22V370000

ELECTRICAL SYSTEM; EQUIPMENT:EMERGENCY:SIREN/LIGHTING/STROBES:WIRING

May 24, 2022
4 units potentially affected
The defect: Braun Ambulances is recalling certain 2021 Chief XL Type I, 2020 TLC, and Express Plus ambulances. An additional resistor was incorrectly installed on the printed circuit board, which can disrupt CAN network communication and cause vehicle lighting to fail.
The risk: Inoperable vehicle lighting can reduce visibility and increase the risk of a crash.
The remedy: Braun Ambulances will replace the modules, free of charge. Owner notification letters were mailed on June 20, 2022. Owners may contact Braun Ambulances' customer service at 1-877-344-9990.
Braun AmbulancesView on NHTSA.gov
20V647000

BACK OVER PREVENTION:DISPLAY FUNCTION; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

Oct 21, 2020
156 units potentially affected
The defect: Braun Ambulances (Braun) is recalling certain 2019 Chief XL Type I and 2019-2020 Chief XL Type III, 2018-2020 Express Plus Type I and 2019 Express Type III, Liberty Type I, Raider Type I and Super Chief ambulances. The lighting and HVAC display may lock up affecting functions like the back up camera, emergency warning lights, or patient care devices depending on the application.
The risk: The vehicle operator may not be able to read the LCD screen or use the buttons or both. If the LCD display appears blank, emergency personnel may not have immediate access to the functions and controls operated by the LCD screen which could delay emergency operations, increasing the risk of injury to a patient or increase the risk of a crash.
The remedy: Braun will notify owners and dealers will remove the defective Vista IV and replace with a new Vista IV, free of charge. The recall began December 18, 2020. Owners may contact Braun Ambulance customer service at 1-877-344-9990.
Braun AmbulancesView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources