RoadVitals

2022 Braun Ambulances Super Chief Type I Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Newest Feb 1, 2024
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is

24V063000

ELECTRICAL SYSTEM:WIRING

Feb 1, 2024
628 units potentially affected
The defect: Braun Ambulances (Braun) is recalling certain 2020-2023 Chief XL I, Express Plus I, Chief XL III, Liberty I, Super Chief I, Signature Series III, Signature Series I, and 2020-2024 Express III emergency vehicles equipped with Weldon 8X16 Input-Output nodes. In the event of a short circuit or wiring failure, the firmware in the node may fail to shut off the output pin, resulting in overloaded electrical circuits.
The risk: Overloaded electrical circuits can overheat, increasing the risk of fire.
The remedy: Weldon will update the firmware, free of charge. Owner notification letters were mailed February 28, 2024. Owners may contact Akron Brass customer service at 1-800-228-1161 or Braun customer service at 1-800-488-0359. Braun's number for this recall is 2024-01.
Braun AmbulancesManufacturer number 2024-01View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources