RoadVitals

2013 Cargo Mate Eliminator Problems

Owner-reported complaints filed with NHTSA, grouped by component

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest Apr 8, 2015
Components namedHow many of our component categories appear on at least one report for this model year. One report can name several.
3
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

What this page shows

Everything below is an owner-reported complaint submitted to NHTSA about the 2013 Cargo Mate Eliminator, grouped by the component NHTSA recorded on the report. These are not confirmed defects, and they are not recalls. NHTSA does not verify most reports before publishing them, and a category with more reports in it is not evidence that a part is defective.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Reports by component

Ranked by how many owner reports name each component category

  • Body & structure133.3%
  • Exterior lighting133.3%
  • Other / unspecified133.3%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Each component in detail

What the reports in each category say, in the owners' own words

Body & structure

Reports naming the vehicle structure, frame, body panels, doors, hood and trim.

1
report

From owner reports, verbatim

THE LEFT FENDER FELL OFF OF THE VEHICLE WHILE DRIVING DOWN THE ROAD. THIS RESULTED IN THE ATTACHED SIDE-MARKER/CLEARANCE LIGHT TO ALSO BE TORN FROM FROM THE VEHICLE RESULTING IN A SHORT IN THE LIGHTING HARNESS. RIGHT SIDE FENDER ALSO CAME LOOSE A FEW MONTHS LATER, AND HAD TO BE REMOVED BEFORE IT FELL OFF. FENDERS ARE HELD ON BY ONLY SELF TAPPING SHEET METAL SCREW, AND DOUBLE SIDED TAPE. THIS RESULTS IN THE SCREW EITHER LOOSENING, OR BEING PULLED OUT OF THE SHEET METAL. I BELIEVE THE ROOT CAUSE IF THE ISSUE IS THE SELF TAPPING SCREWS. SEVERAL OF THESE WERE SCREWED STRAIGHT INTO THE SHEET METAL SIDE, WHERE NO SUPPORTS WERE PRESENT. ALSO THESE TYPES OF SCREWS STRIP VERY EASILY AND ARE A POOR CHOICE TO USE TO HOLD SUCH A VITAL COMPONENT ONTO THE VEHICLE. *TR

NHTSA ID 10704381 · filed Apr 8, 2015

Too few reports in this category for a page of its own — they appear in the full complaint list.

Exterior lighting

Reports naming headlights, tail lights, turn signals and other exterior lighting.

1
report

From owner reports, verbatim

THE LEFT FENDER FELL OFF OF THE VEHICLE WHILE DRIVING DOWN THE ROAD. THIS RESULTED IN THE ATTACHED SIDE-MARKER/CLEARANCE LIGHT TO ALSO BE TORN FROM FROM THE VEHICLE RESULTING IN A SHORT IN THE LIGHTING HARNESS. RIGHT SIDE FENDER ALSO CAME LOOSE A FEW MONTHS LATER, AND HAD TO BE REMOVED BEFORE IT FELL OFF. FENDERS ARE HELD ON BY ONLY SELF TAPPING SHEET METAL SCREW, AND DOUBLE SIDED TAPE. THIS RESULTS IN THE SCREW EITHER LOOSENING, OR BEING PULLED OUT OF THE SHEET METAL. I BELIEVE THE ROOT CAUSE IF THE ISSUE IS THE SELF TAPPING SCREWS. SEVERAL OF THESE WERE SCREWED STRAIGHT INTO THE SHEET METAL SIDE, WHERE NO SUPPORTS WERE PRESENT. ALSO THESE TYPES OF SCREWS STRIP VERY EASILY AND ARE A POOR CHOICE TO USE TO HOLD SUCH A VITAL COMPONENT ONTO THE VEHICLE. *TR

NHTSA ID 10704381 · filed Apr 8, 2015

Too few reports in this category for a page of its own — they appear in the full complaint list.

Other / unspecified

Reports whose component NHTSA recorded as unknown, or that do not map to one of the categories above.

1
report

From owner reports, verbatim

THE LEFT FENDER FELL OFF OF THE VEHICLE WHILE DRIVING DOWN THE ROAD. THIS RESULTED IN THE ATTACHED SIDE-MARKER/CLEARANCE LIGHT TO ALSO BE TORN FROM FROM THE VEHICLE RESULTING IN A SHORT IN THE LIGHTING HARNESS. RIGHT SIDE FENDER ALSO CAME LOOSE A FEW MONTHS LATER, AND HAD TO BE REMOVED BEFORE IT FELL OFF. FENDERS ARE HELD ON BY ONLY SELF TAPPING SHEET METAL SCREW, AND DOUBLE SIDED TAPE. THIS RESULTS IN THE SCREW EITHER LOOSENING, OR BEING PULLED OUT OF THE SHEET METAL. I BELIEVE THE ROOT CAUSE IF THE ISSUE IS THE SELF TAPPING SCREWS. SEVERAL OF THESE WERE SCREWED STRAIGHT INTO THE SHEET METAL SIDE, WHERE NO SUPPORTS WERE PRESENT. ALSO THESE TYPES OF SCREWS STRIP VERY EASILY AND ARE A POOR CHOICE TO USE TO HOLD SUCH A VITAL COMPONENT ONTO THE VEHICLE. *TR

NHTSA ID 10704381 · filed Apr 8, 2015

Too few reports in this category for a page of its own — they appear in the full complaint list.

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers.

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .