RoadVitals

2015 Charles Machine Ditch Witch T18 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Newest Mar 18, 2015
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is

15V158000

SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY

Mar 18, 2015
590 units potentially affected
The defect: Charles Machine Works Inc (Charles Machine) is recalling certain model year 2013-2015 Ditch Witch T18 tandem axle trailers manufactured January 1, 2013, to February 15, 2015, and with or without vacuum excavators mounted on them. The wheel hubs of the affected trailers may have incorrect bearing pre-loads which can cause the trailer wheels to lock up.
The risk: A trailer wheel lock up would increase the risk of a crash.
The remedy: Charles Machine will notify owners, and dealers will inspect the axles, and replace the bearings, as necessary, free of charge. The recall began on April 8, 2015. Owners may contact Charles Machine customer service at 1-800-654-6481. Charles Machine's number for this recall is ID #0377453.
Charles Machine Works IncManufacturer number ID #0377453View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources