RoadVitals

2001 Chrysler Sebring Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
12
Newest Jun 3, 2016
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

12 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Jun 3, 2016
16,315 units potentially affected
The defect: Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2001-2002 Chrysler Sebring and Dodge Stratus vehicles, equipped with beige interiors. The affected vehicles were previously repaired for a recall issue using an incorrect part. The incorrect part may not prevent the passenger side sun visor from detaching if the passenger frontal air bag deploys and the passenger side sun visor is folded down in a certain position.
The risk: If the passenger side sun visor detaches and is propelled rearward, there is an increased risk of occupant injury.
The remedy: Chrysler will notify the affected owners. Dealers will install the correct tether strap to retain the passenger sun visor, free of charge. The recall began July 26, 2016, owners will be sent a second email when parts are available. Owners may contact Chrysler customer service at 1-800-853-1403.
Mitsubishi Motors North America, Inc.View on NHTSA.gov

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Jun 2, 2015
443,442 units potentially affected
The defect: Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2000-2005 Eclipse vehicles manufactured April 5, 1999, to December 17, 2004, 2001-2005 Eclipse Spyder vehicles manufactured January 19, 2000, to March 18, 2005, 2001-2005 Chrysler Sebring vehicles manufactured April 17, 2000, to February 21, 2005, and 2001-2005 Dodge Stratus vehicles manufactured April 17, 2000, to February 22, 2005. In the affected vehicles, the passenger side sun visor may be folded down in such a position that, if the passenger frontal air bag deploys, the passenger side sun visor may detach.
The risk: If the passenger side sun visor detaches and is propelled rearward, there is an increased risk of occupant injury.
The remedy: MMNA will notify their owners, and Chrysler will notify the Chrysler and Dodge owners. Dealers will install a tether strap to retain the passenger sun visor, free of charge. The recall began on July 20, 2015. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-15-005. Chrysler and Dodge owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R30.
Mitsubishi Motors North America, Inc.Manufacturer number SR-15-005 (FCA R30)View on NHTSA.gov

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

Oct 9, 2009
5,787 units potentially affected
The defect: QUALIS AUTOMOTIVE IS RECALLING CERTAIN AFTERMARKET BALL JOINTS SOLD FOR USE ON CERTAIN PASSENGER VEHICLES. THE SOCKET MAY HAVE BEEN EXCESSIVELY HARDENED WHICH COULD CAUSE IT TO CRACK NEAR THE RETAINING RING GROOVE ALLOWING THE BALL STUD TO SEPARATE UNDER IMPACT LOAD. THE SUBJECT BALL JOINTS WERE SOLD AS FOUR PART NUMBERS, D10945, D10946, G10945, AND G10946. THE AFFECTED CONTROL ARMS, D10945 AND D10946, ARE STAMPED WITH THE FOLLOWING DATES ON THE BALL JOINTS: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, AND 116609. THE G10945 AND G10946 ARE THE SAME PART AS THE D10945 AND D10946 RESPECTIVELY. THEY ARE LABELED DIFFERENTLY DEPENDING ON THE AFTERMARKET CUSTOMER.
The risk: SEPARATION OF THE BALL STUD FROM THE SOCKET OF THE BALL JOINT HOUSING WOULD ALLOW THE CONTROL ARM TO COLLAPSE AND THE WHEEL TO FOLD IN CAUSING LOSS OF STEERING CONTROL, POSSIBLY RESULTING IN A CRASH.
The remedy: QUALIS AUTOMOTIVE WILL REPLACE THE BALL JOINTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2009. OWNERS MAY CONTACT QUALIS AUTOMOTIVE AT 1-800-493-4128.
QUALIS AUTOMOTIVE LLCView on NHTSA.gov

EXTERIOR LIGHTING

Apr 7, 2009
16,270 units potentially affected
The defect: SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
The risk: DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
The remedy: SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Mar 29, 2007
13,128 units potentially affected
The defect: CERTAIN CARDONE MASTER CYLINDERS WITH PART NUMBERS 10-2925, 10-2987, 10-2987MZA, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, AND 11-3156, AND WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID.
The risk: LOSS OF BRAKE FLUID CAN RESULT IN POOR BRAKING PERFORMANCE, POSSIBLY RESULTING IN A VEHICLE CRASH.
The remedy: CARDONE WILL NOTIFY OWNERS AND OFFER TO REPURCHASE ANY DEFECTIVE MASTER CYLINDERS. THE RECALL BEGAN DURING APRIL 2007. OWNERS CAN CONTACT CARDONE AT 1-800-777-4780.
CARDONE INDUSTRIES, INC.View on NHTSA.gov

POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES

Jan 16, 2001
28,439 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS. A HOSE MANUFACTURING PROCESS ALLOWED THE REINFORCEMENT YARD TO BREACH THE INNER LAYER OF SOME AUTOMATIC TRANSMISSION HOSES WEAKENING THE INNER WALL WHICH COULD RESULT IN LEAKAGE OF THE AUTOMATIC TRANSMISSION FLUID.
The risk: FLUID LEAKAGE FROM THE COOLER HOSES CAN CAUSE TRANSAXLE DRIVEABILITY PROBLEMS AND SMOKE IF THE OIL CONTACTS THE FRONT EXHAUST PIPE.
The remedy: DEALERS WILL REPLACE THE TRANSAXLE OIL COOLER HOSES. OWNER NOTIFICATION BEGAN APRIL 9, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
DAIMLERCHRYSLER CORPORATIONManufacturer number 969View on NHTSA.gov
Jan 8, 2001
20 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. A NUMBER OF INCORRECT DRIVER SIDE SEAT MOUNTING BOLTS WERE INSTALLED INTO VEHICLES.
The risk: IN THE EVENT OF A CRASH, THE BOLTS MAY NOT PROPERLY SECURE THE SEAT AND COULD CAUSE INCREASED INJURY TO THE DRIVER OF THE VEHICLE.
The remedy: DEALERS WILL INSPECT THE SEAT MOUNTING BOLTS AND THEN REPLACE THE BOLTS IF NECESSARY. OWNER NOTIFICATION BEGAN FEBRUARY 5, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
DAIMLERCHRYSLER CORPORATIONManufacturer number 968View on NHTSA.gov

CHILD SEAT

Nov 9, 2000
1,211,756 units potentially affected
The defect: VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, PICKUP TRUCKS AND SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." SOME OF THE OWNER'S MANUALS FOR THESE VEHICLES ARE MISSING INSTRUCTIONS THAT PROVIDE A STEP-BY-STEP PROCEDURE, INCLUDING DIAGRAMS, FOR PROPERLY ATTACHING A CHILD RESTRAINT SYSTEM'S TETHER STRAP TO THE TETHER ANCHORAGE.
The risk: IN THE EVENT OF A CRASH, THE CHILD SEAT MAY NOT BE PROPERLY ATTACHED INCREASING THE RISK OF INJURY TO THE CHILD.
The remedy: OWNERS WILL BE PROVIDED WITH AN ADDENDUM TO THE OWNER'S MANUALS.
DAIMLERCHRYSLER CORPORATIONManufacturer number 957View on NHTSA.gov

FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

Oct 27, 2000
3,480 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE OUTER LAYER ONLY OF THIS 3-LAYER FUEL RETURN HOSE DOES NOT CONTAIN THE DESIRED OZONE PROTECTION DUE TO A PROCESSING ERROR.
The risk: THIS HOSE IS CONSIDERED TO BE INADEQUATE.
The remedy: DEALERS WILL REPLACE THE FUEL RETURN HOSE.
DAIMLERCHRYSLER CORPORATIONManufacturer number 959View on NHTSA.gov

AIR BAGS:FRONTAL

Oct 12, 2000
419 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. PASSENGER AIR BAGS WERE BUILT WITH SUSPECT ALUMINUM EXTRUSION SECTIONS WHICH MAY NOT RETAIN THE AIR BAG DOOR DURING AN AIR BAG DEPLOYMENT EVENT.
The risk: A SEPARATED AIR BAG DOOR COULD INJURE A VEHICLE OCCUPANT.
The remedy: DEALERS WILL REPLACE THE PASSENGER SIDE AIR BAG.
DAIMLERCHRYSLER CORPORATIONManufacturer number 898View on NHTSA.gov

ENGINE AND ENGINE COOLING:ENGINE

Oct 2, 2000
554 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE HARNESS FOR THE CRANKSHAFT POSITION SENSOR COULD COME IN CONTACT WITH A NEW PROTECTIVE SHIELD CAUSING A GROUNDED CIRCUIT.
The risk: PROLONGED WIRING HARNESS CONTACT WITH THE HEAT SHIELD WILL CAUSE THE WIRING INSULATION TO WEAR AND EVENTUALLY TO GROUND OUT. THIS COULD CAUSE THE ENGINE TO DIE-OUT, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL RE-ROUTE THE CRANKSHAFT POSITION SENSOR HARNESS.
DAIMLERCHRYSLER CORPORATIONView on NHTSA.gov

STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS

Sep 18, 2000
4,504 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THROUGH DEGRADATION OF THE BOND BETWEEN THE SILENCER PAD AND A SHEET METAL PANEL (QUARTER INNER UPPER), THE PAD MAY FALL ONTO THE MAP LIGHT LOCATED IN THE REAR SEATING AREA NEAR THE C-PILLAR TRIM PANEL (LH AND RH). THIS CONTACT COULD CAUSE THE PAD TO MELT, CREATING A HOT SMELL AND/OR SMOKE DURING LONG PERIODS OF ILLUMINATION.
The risk: SMOKE INHALATION COULD BE HARMFUL TO VEHICLE OCCUPANTS.
The remedy: DEALERS WILL REMOVE THE INSULATION PAD FROM BEHIND BOTH REAR MAP LIGHTS.
DAIMLERCHRYSLER CORPORATIONManufacturer number 896View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE02082ClosedPreliminary Evaluation

SAFETY BELT CINCHING LATCH PLATE

Opened Nov 6, 2002
Closed Apr 23, 2003

THERE ARE NO INJURIES OR FATALITIES ASSOCIATED WITH THIS ALLEGED DEFECT.WHILE CONDUCTING THIS INVESTIGATION, ODI FOUND THAT THE SUBJECT CINCHES MEET THE LOAD BEARING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 208, AND THAT MANY OF THE REPORTED FAILURES WERE DUE TO INCORRECT CHILD SAFETY SEAT INSTALLATIONS. ADDITIONALLY, THE REPORT RATE IS LOW (1.60/100K).THE INFORMATION AVAILABLE FAILS TO ESTABLISH THE EXISTENCE OF A DEFECT TREND AT THIS TIME.FURTHER ALLOCATION OF AGENCY RESOURCES TO THIS ISSUE IS UNWARRANTED AND THE PRELIMINARY EVALUATION IS BEING CLOSED.

SEAT BELTS

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .