RoadVitals

1985 Dodge B250 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Newest Jul 30, 1985
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is

85V098000

EQUIPMENT:OTHER:LABELS

Jul 30, 1985
1,000 units potentially affected
The defect: CERTIFICATION LABELS CONTAIN INCORRECT VEHICLE WEIGHT RATINGS AND/OR TIRE AND RIM SIZE SELECTION DATA. CORRECT INFORMATION IS REQUIRED TO INFORM USER OF LOADING CAPABILITIES. CONSEQUENCE OF DEFECT: TRUCKS DO NOT COMPLY WITH FMVSS 120.
The remedy: CORRECTED LABELS WILL BE MAILED TO OWNERS AND DEALERS.
CHRYSLER CORPORATIONView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA88001ClosedEngineering Analysis

BRAKE POWER ASSIST

Opened Oct 1, 1987
Closed Mar 1, 1988

SUMMARY OF INFORMATION FROM MANUFACTURER:CHRYSLER RECALLED, IN CANADA,67,602 1984 THROUGH 1987 PASSENGER CARS, TRUCKS, AND VANS EQUIPPED WITH THE5.2L ENGINE FOR INTERMITTENT LOSS OF BRAKE POWER ASSIST ON A SECONDAPPLICATION OF THE BRAKE PEDAL.THE DEFECT WAS A RESULT OF THE BRAKEBOOSTER VACUUM HOSE PORT IN THE BASE OF THE CARBURETOR BEING BLOCKED WITHFROZEN MOISTURE AFTER AN EXTENDED PERIOD OF HIGHWAY DRIVING AT LOW AMBIENTTEMPERATURES.TO PREVENT THIS DEFECT FROM OCCURRING, THE VACUUM SOURCE FORTHE BRAKE BOOSTER WAS RELOCATED FROM THE BASE OF THE CARBURETOR TO THEINTAKE MANIFOLD.IT WAS STATED THAT REPORTS OF THE ALLEGED DEFECT HAVEOCCURRED IN THE NORTHERN AREAS OF CANADA.ANALYSIS:REVIEW OF MANUFACTURER'S DATA INDICATED AT LEAST 4 SIMILAR U.S.VEHICLES HAVE EXPERIENCED FAILURES CONSISTENT WITH THOSE REPORTED IN THECANADIAN MARKET.ONE VEHICLE WAS A MANUFACTURER TEST VEHICLE.THE STATESIN WHICH THESE REPORTED FAILURES OCCURRED ARE ALASKA, MINNESOTA (2), ANDWISCONSIN.IT IS THIS ENGINEER'S OPINION THAT THERE IS SUFFICIENT EVIDENCETO SUGGEST THAT THE ALLEGED DEFECT COULD BE REPRODUCED BY PERFORMING TESTSIN A CONTROLLED ENVIRONMENTAL CHAMBER.STATUS:ANALYZING MANUFACTURER'S RESPONSE AT 12/09/87.===

SERVICE BRAKES, HYDRAULIC
PE87042ClosedPreliminary Evaluation

EXHAUST SYSTEM HEAT

Opened Aug 7, 1987
Closed Nov 9, 1987

SUMMARY OF INFORMATION FROM MANUFACTURER:HIGH UNDERHOOD AND EXHAUSTTEMPERATURES ARE A CUSTOMER SATISFACTION CONCERN INVOLVING A VERY LIMITEDNUMBER OF VEHICLES OPERATED BY A FEW SEVERE SERVICE FLEET LOCATIONS.WEARE NOT AWARE OF ANY ACCIDENTS OR FIRES CAUSED BY THE CONDITION, AND WE DONOT CONSIDER IT TO PRESENT A RISK TO MOTOR VEHICLE SAFETY.ANALYSIS:EPA REQUIREMENTS FOR HEAVY DUTY VEHICLES CAUSED EMISSION SYSTEMCHANGES FOR THE 1985 AND 1987 CALENDAR YEARS.BEGINNING IN 1985 DUAL AIRPUMPS REPLACED THE SINGLE UNIT, AND DUAL CATALYTIC CONVERTERS WERE ADDED IN1987.THE CHANGES INCREASED UNDERHOOD AND EXHAUST SYSTEM TEMPERATURES.CONCERNS INCLUDE DRIVEABILITY AND VAPOR LOCK PROBLEMS DUE TO HOT FUELHANDLING AND HEAT DAMAGE TO THE 4 WD DISCONNECT VACUUM RESERVOIR, EXHAUSTSYSTEM HANGERS, SPEEDOMETER CABLE, AND WINDSHIELD WASHER BOTTLE.CURRENTLYMEANS TO REDUCE AND BETTER MANAGE THE TEMPERATURES ARE BEING STUDIED.CONSIDERATIONS ARE: AIR PUMP DIVERTER SYSTEMS, HEAT SHIELD FOR AFFECTEDUNDER BODY COMPONENTS, AND REROUTING FUEL SUPPLY LINES AWAY FROM HEATSOURCES.ADDITIONALLY FIVE TECHNICAL SERVICE BULLETINS HAVE BEEN ISSUEDREGARDING VAPOR LOCK ON THE SUBJECT VEHICLES.PROPOSED ACTION:CLOSE THIS PE.NO SAFETY RELATED DEFECT HAS BEENDETECTED.===

VEHICLE SPEED CONTROL:LINKAGES

Elsewhere on this vehicle

Data sources