RoadVitals

1979 Dodge MB400 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Jul 24, 1979
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

79V176000

EQUIPMENT:APPLIANCE:AIR CONDITIONER

Jul 24, 1979
68,000 units potentially affected
The defect: CONDENSATE WATER MAY ACCUMULATE IN THE AIR CONDITIONING BLOWER HOUSING; THERE IS A HIGH PROBABILITY THAT THIS WATER WILL CAUSE THE BLOWER MOTOR TO FAIL. BLOWER MOTOR FAILURE WOULD DISABLE THE AIR CONDTIONING UNIT AND THERE WOULD BE NO WAY TO DEFROST OR DEFOG THE WINDSHIELD.
The remedy: DEALER WILL DRILL A 1/4 INCH DRAIN HOLE IN THE BOTTOM OF THE AIR CONDITIONING BLOWER HOUSING TO PREVENT WATER ACCUMULATION, WITHOUT CHARGE TO OWNER.
CHRYSLER CORPORATIONView on NHTSA.gov
79V047000

STEERING:LINKAGES

Feb 13, 1979
4,200 units potentially affected
The defect: INCORRECT STEERING LINKAGE COMPONENTS MAY HAVE BEEN INSTALLED ON THE INVOLVED VEHICLES. THESE VEHICLES WERE ASSEMBLED WITH LIGHT DUTY STEERING LINKAGE TIE ROD AND CENTER LINK ASSEMBLIES IN PLACE OF THE SPECIFIED HEAVY DUTY COMPONENTS. THESE LIGHT DUTY COMPONENTS ARE NOT COMPATIBLE FOR ATTACHMENT TO THE HEAVY DUTY KNUCKLE ARMS, RESULTING IN AN INFLEXIBLE (NO BALL JOINT MOVEMENT) ATTACHMENT OF THE TIE ROD TO KNUCKLE ARM. THIS COULD, EVENTUALLY, RESULT IN FATIGUE FAILURE OF THAT ATTACHMENT ON ONE OF THE COMPONENTS.
The remedy: THE STEERING LINKAGE SYSTEM TIE RODS AND CENTER LINK WILL BE INSPECTED AND, IF NECESSARY, LIGHT DUTY COMPONENTS WILL BE REPLACED WITH HEAVY DUTY COMPONENTS AT NO COST TO OWNER.
CHRYSLER CORPORATIONView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources