FUEL SYSTEM, GASOLINE:DELIVERY
2006 Ducati ST3 Abs
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 1 NHTSA owner-reported complaint for the 2006 Ducati ST3 Abs, most frequently naming the engine category. 1 safety recall has been issued covering this model year; and 23 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 1 month of data.
What owners report
Complaints grouped by the component NHTSA recorded
- Engine1100.0%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
ENGINE NOISE, REAR TIRE LOCKED UP ALMOST LOST CONTROL OF MOTORCYCLE, FAILURE WAS A BROKEN ENGINE CRANK SHAFT (RECALL CAMPAIGN,TSB603), CORRECTION COMPLETELY DISASSEMBLE ENGINE AND REPLACE ENGINE CRANK SHAFT AND FLY WHEEL NUT, MOTORCYCLE HAD TO BE TOWED TO DEALERSHIP, ABOUT 975 MILES ROUND TRIP, MOTORCYCLE WAS ALSO UNDER FACTORY WARRANTY, MANUFACTURE (DUCATI NORTH AMERICA) MADE US PAY FOR PARTS UP FRONT EVEN THOUGH THIS WAS A WARRANTY REPAIR/NATIONAL RECALL, MANUFACTURE WELL NOT PAY FOR TOW BILL OF $1090.00 EVEN THOUGH IT IS COVERED UNDER WARRANTY, IT ALSO TOOK TO LONG TO GET THE PARTS FROM THE MANUFACTURE (3 MONTHS) SO BIKE HAD TO BE BOUGHT BACK BY DEALER AND A NEW BIKE WAS PURCHASED IN AUGUST OF 2008 AT THE DEALERS EXPENSE, NET LOSS TO DEALER ON REPURCHASE TRANSACTION WAS $3890.00. *TR
- NHTSA ID
- 10250676
- Incident
- May 9, 2008
- Mileage
- 5,019 mi
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
SUSPENSION
Procedure for Assessing Front Fork Oil Leaks. Applicability: All Models. This service repair bulletin informs dealers and service managers of the assessment criteria for identifying front fork-related defects. The purpose is prevent technicians from mistaking oozing oil or assembly grease, for legitimate defects. The bulletin further provides examples and pictures for clarification.
SERVICE BRAKES, HYDRAULIC
Guided Diagnosis for Front Brake System Bleeding. Applicability: All Models. This Service Bulletin replaces and cancels the previous bulletin SRV-SRB-20-014 published on 4/17/2020. It provides dealers and service managers with needed information to correctly bleed the front brake system of the various Ducati models. This bulletin further refers the reader to an attached diagnosis guide. The referenced guide/annex is available to NHTSA upon request.
ENGINE AND ENGINE COOLING; POWER TRAIN
Finial Drive Chain Maintenance Precautions. Applicability: All Models and Model Years (except XDiavel). This Service Bulletin replaces and cancels the previous bulletins: SRV-SRB-18-030 published on 05/11/2018, SRV-SRB-19-046 published on 12/31/2019, SRV-SRB-20-050 published on 11/24/2020. It provides dealers and service managers additional final drive chain care to ensure optimum performance and longevity for the chain. this includes cleaning, lubricating, inspecting and tension guidelines.
ENGINE AND ENGINE COOLING
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine_Rev.01. Applicability: All Models. This service repair bulletin instructs dealers and service managers on authorized procedures for identifying and isolating coolant and engine oil leaks. The use of a prescribed leak trace powder is stressed. This bulletin includes service instructions.
ENGINE AND ENGINE COOLING
Precautions to Follow During Crankcase Cleaning. Applicability: All Models. This service bulletin informs dealers and service managers about precautions in using abrasive cleaners for engine component sealant, and in particular the crankcase covers. The bulletin further provides cleaning instructions with approved cleaning tools.
ENGINE AND ENGINE COOLING
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine. Applicability: All Models. This service bulletin provides dealers and service managers with troubleshooting guidance for oil or coolant leaks. This bulletin includes service instructions.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.