EXTERIOR LIGHTING:BRAKE LIGHTS; SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
2013 Fccc MT55
Recalls, owner-reported complaints, investigations and safety data
Overview
Our database contains no NHTSA owner-reported complaints for the 2013 Fccc MT55. 1 safety recall has been issued covering this model year; and 12 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Safety recalls
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
No owner complaints recorded for this model year
Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
FUEL/PROPULSION SYSTEM
Service Solution for 2012-2024 MT45G & MT55G 6.0-Liter Gas or CNG Failed/Cracked Fuel Pump Fuse (303)
ENGINE AND ENGINE COOLING
Updated Service Solution for 6.0l Gas Engine With Low Oil PSI. Certain FCCC vehicles equipped with a 6.0l GM gas engine may experience a complaint of low oil pressure indication on the instrument panel.
POWER TRAIN
FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
FUEL SYSTEM, DIESEL; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS
This SKU is a DEF Injector. The customer communication requested return of unsold inventory to inspect the sealing. The injector sealing may have an issue which will cause a slow leak. A slow leak of the DEF Injector can lead to crystal formation which can cause aftertreatment related fault codes and ECU driven engine derating.
ELECTRICAL SYSTEM; EQUIPMENT
Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeterÃÂî is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
ENGINE AND ENGINE COOLING
Revision for Field Service Campaign for 8.0L Engine Calibration Updates. On certain vehicles, an erroneous fault code setting and malfunction indicator light (MIL) illumination may occur. The engine controller software will be updated. The revision has updated work instructions and a new contact phone number for Agility with business hours provided.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.