RoadVitals

2014 Ferrara Igniter Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Feb 5, 2018
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

EQUIPMENT

Feb 5, 2018
66 units potentially affected
The defect: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2016 Inferno and International 4400, 2013-2016 Igniter, 2014-2017 Cinder and Freightliner M2 106, 2013-2014 Ember and 2013-2017 Kenworth T370 fire-fighting vehicles, equipped with Hale pressure relief valves in the water pumps used for fire fighting. Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting.
The risk: A reduction in water pressure may hinder fire fighting efforts, increasing the risk of injury.
The remedy: Ferrara will notify owners, and Ferrara certified dealers or technicians will replace the relief valve retaining ring with one that is stainless steel, free of charge. The recall began on February 12, 2018. Owners may contact Ferrara customer service at 1-800-443-9006.
Ferrara Fire Apparatus, Inc.View on NHTSA.gov

ELECTRICAL SYSTEM

Jul 20, 2016
24 units potentially affected
The defect: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance.
The risk: The unintended turning on or off of accessories such as emergency beacons or automatic snow chains can increase the risk of a crash.
The remedy: Ferrara will notify owners, and service personnel or service centers will reprogram the units, free of charge. The recall began on August 26, 2016. Owners may contact Ferrara customer service at 1-225-567-7100 extension 3011.
Ferrara Fire Apparatus, Inc.View on NHTSA.gov

ELECTRICAL SYSTEM

Jul 13, 2016
2 units potentially affected
The defect: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2014-2016 Igniter vehicles manufactured January 1, 2014, to May 2, 2016, equipped with certain Class 1 ES-KEY power control modules manufactured by Hale Products. The affected power control modules may not provide sufficient circuit protection depending on their combination of software and installation, possibly resulting in a short circuit.
The risk: A short circuit may result in damage to components of the vehicle's electrical system, affecting their function, such as causing a loss of headlights, thereby increasing the risk of a crash. A short circuit may also increase the risk of a fire.
The remedy: Ferrara will notify owners, and dealers will upgrade the software and/or retrofit fuses, free of charge. The recall began on August 26, 2016. Owners may contact Ferrara customer service at 1-225-567-7100.
Ferrara Fire Apparatus, Inc.View on NHTSA.gov

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT; SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT

Sep 4, 2015
8 units potentially affected
The defect: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2013-2014 Igniter and Inferno firetrucks manufactured October 16, 2013, to December 10, 2014. The affected vehicles are built with independent front suspensions that may have loose ball joints.
The risk: A loose ball joint may separate from the steering linkage resulting in a loss of steering control and an increased risk of a crash.
The remedy: Ferrara will notify owners, and dealers will inspect the firetrucks and replace the affected suspension components, as necessary, free of charge. The recall is expected to begin in October 2015. Owners may contact Ferrara customer service at 1-225-567-7100 ext 3011.
Ferrara Fire Apparatus, Inc.View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources