SEAT BELTS:FRONT:ANCHORAGE
Jul 18, 1990
13,637 units potentially affected
MARK III INDUSTRIES, INC.View on NHTSA.gov
1979 Ford E-150 Recalls
Safety recall campaigns filed with NHTSA that cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
5
Newest Jul 18, 1990
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file
Recall campaigns
5 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is
WHEELS
Aug 7, 1979
22,500 units potentially affected
The defect: THE WHEEL ASSEMBLY MAY CONTAIN SUBSTANDARD WELDS IN THE AREA WHERE THE DISC IS ATTACHED TO THE RIM. AS A RESULT, CRACKS CAN FORM IN THE WHEEL ASSEMBLY, CAUSING AIR LOSS AND AN UNDERINFLATED TIRE.
The remedy: DEALER WILL INSPECT AND REPLACE ANY DEFECTIVE WHEELS WITHOUT CHARGE TO OWNER.
FORD MOTOR COMPANYView on NHTSA.gov
STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS
Jun 19, 1979
12,000 units potentially affected
The defect: CERTAIN VEHICLES MAY NOT CONTAIN THE SPECIFIED BODY MOUNTED HEAT SHIELDS. THIS COULD CAUSE HIGH FLOOR PAN TEMPERATURES WHEN THE ENGINE IS IDLED FOR EXTENDED PERIODS OF TIME. FOULED SPARK PLUGS OR OTHER ENGINE CONDITIONS COULD FURTHER INCREASE EXHAUST TEMPERATURES.
The remedy: THE DEALER WILL INSTALL THE NECESSARY FRAME MOUNTED HEAT SHIELD, IF MISSING.
FORD MOTOR COMPANYView on NHTSA.gov
SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
May 15, 1979
82,000 units potentially affected
The defect: THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.
The remedy: DEALER WILL REPLACE THE SUSPECT BRAKE RETAINING PIN.
FORD MOTOR COMPANYView on NHTSA.gov
SEAT BELTS:REAR/OTHER
Oct 5, 1978
874 units potentially affected
The defect: ON THE INVOLVED VEHICLES, THE POTENTIAL EXISTS FOR THE OUTBOARD SEAT BELTS TO BECOME TRAPPED IN THE SEAT-BED PIVOTING MECHANISM. SHOULD THE BELT BECOME TRAPPED IN THE MECHANISM WHEN THE SEAT IS CONVERTED TO A BED, THE BELT MAY BECOME CUT OR FRAYED.
The remedy: THE DEALER WILL INSTALL SEAT BELT SHIELDS ON THE FOLDING SEAT/BED PIVOTING MECHANISM AND REPLACE THE OUTBOARD SEAT BELT ASSEMBLIES IF DAMAGED, FREE OF CHARGE.
FORD MOTOR COMPANYView on NHTSA.gov
What a recall is
- Safety recall
- A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
- Safety investigation
- NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
- Manufacturer communication
- Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.
FILLER NECK SPURT
Opened Nov 4, 1986
Closed Apr 29, 1987
SUMMARY OF INFORMATION FROM MANUFACTURER:FORD HAS SUPPLIED INFORMATION REQUESTED CONCERNING VEHICLE POPULATIONAND THE NUMBER OF COMPLAINTS.ANALYSIS:THE PROBLEM APPEARS TO BE ONE OF EXCESSIVE HEAT COLLECTING UNDER THEVEHICLES, USUALLY WHILE STATIONARY WITH THE ENGINE IDLING.THIS HEATCAUSES THE FUEL TO VAPORIZE IN THE FUEL TANK AND DEVELOP PRESSURES INEXCESS OF WHAT THE VENT SYSTEM CAN HANDLE.STATUS:IR TO FORD SENT ON 2/20/87. MEETING WITH FORD AND FINAL STAGE MANUFACTUR-ERS HELD ON MARCH 11 & 12, 1987. ADDITIONAL MEETING HELD ON MARCH 7, 1987.ALSO ON APRIL I, 1987.FORD ANNOUNCED SERVICE CAMPAIGN, NO SAFETY RECALL.RECALL REQUEST LETTER SENT ON 4/7/87. FORD DID NOT AGREE TO A SAFETYRECALL, CONSEQUENTLY A PANEL MEETING WAS HELD ON 4/29/87 AND INVESTIGATIVECASE C87-003 WAS OPENED.THIS EA WAS CLOSED AS A RESULT OF THE CASE OPEN-ING ON 4/27/87.===
VEHICLE SPEED CONTROL:LINKAGES
Elsewhere on this vehicle
Data sources
- NHTSA Office of Defects Investigation — recall campaigns and safety investigations