RoadVitals

1988 Ford Ranger Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Apr 8, 1998
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

98E010000

SERVICE BRAKES, AIR:DISC:ROTOR

Apr 8, 1998
23,500 units potentially affected
The defect: EQUIPMENT DESCRIPTION: AFTERMARKET BRAKE ROTORS FOR USE ON CERTAIN FORD AND MAZDA TRUCKS. CRACKED CASTINGS CAUSED CRACKS TO APPEAR ON THE OUTER DIAMETER OF THE ROTOR HAT OR AROUND THE STUD HOLE.
The risk: LOSS OF BRAKING CAN RESULT.
The remedy: AIMCO WILL REIMBURSE CONSUMERS/INSTALLERS FOR THE COST OF REPLACEMENT ROTORS AND INSTALLATION. CONSUMERS ARE REQUESTED TO RETURN TO THE LOCATION WHERE THE ROTORS WERE ORIGINALLY PURCHASED/INSTALLED FOR REPLACEMENT.
AIMCO PRODUCTS INC.View on NHTSA.gov
87V141000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS

Sep 4, 1987
141 units potentially affected
The defect: TRUCKS WERE BUILT WITH INCORRECT REAR BRAKE ASSEMBLIES. CONSEQUENCE OF DEFECT: A TENDENCY FOR REAR BRAKE LOCKUP WOULD EXIST PARTICULARLY DURING HEAVY BRAKE APPLICAION WITH A LIGHTLY LOADED TRUCK. ALSO, INCREASED STOPPING DISTANCE WOULD BE REQUIRED IF THE BRAKE MODULATION (PUMPING THE BRAKES) IS USED TO CONTROL THE VEHICLE DURING A HARD BRAKE STOP.
The remedy: REPLACE REAR BRAKE ASSEMBLIES.
FORD MOTOR COMPANYView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE92029ClosedPreliminary Evaluation

WHL SEPARATION/TORQUE LOSS

Opened Mar 16, 1992
Closed Aug 31, 1992

There is no summary currently available

SUSPENSION
EA90042ClosedEngineering Analysis

THROTTLE STICKING

Opened Aug 31, 1990
Closed Dec 31, 1991

There is no summary currently available

VEHICLE SPEED CONTROL:LINKAGES

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .