RoadVitals

2016 Genie Tz-34/20

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Feb 5, 2016
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2016 Genie Tz-34/20. 1 safety recall has been issued covering this model year; and 1 manufacturer communication is on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
16V067000

EQUIPMENT

Feb 5, 2016
6 units potentially affected
The defect: Genie Industries, Inc. (Genie) is recalling certain model year 2016 TZ 34/20 trailer-mounted boom lifts manufactured January 5, 2016, to January 20, 2016. The affected lifts have bolts that attach the turntable to the rotation bearing that may not have been properly tightened.
The risk: If the bolts are not properly tightened, they may shear and the platform can fall, increasing the risk of injury.
The remedy: Genie will notify owners, and dealers will correctly tighten the bolts attaching the turntable to the rotation bearing, free of charge. The began on March 9, 2016. Owners may contact Genie customer service at 1-800-536-1800. Genie's number for this recall is Issue 121.
Genie Industries, Inc.Manufacturer number Issue 121View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

PN 160015

EQUIPMENT:OTHER:LABELS

THE INCORRECT “YEAR OF MANUFACTURE” WAS PRINTED ON SERIAL LABELS. THIS COULD LEAD TO CONFUSION AS TO WHAT THE MACHINE AGE ACTUALLY IS. ONLY THREE UNITS WERE AFFECTED.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Genie Tz-34/20 by model year
YearComplaintsRecallsInvestigationsIssue Index
2016Viewing010—
2015010—
2004010—
2003010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.