RoadVitals

2004 Genie Tz-50 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Mar 27, 2007
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

07V141000

STRUCTURE

Mar 27, 2007
81 units potentially affected
The defect: ON CERTAIN TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, THE HOLD DOWN BRACKET THAT SECURES THE MAST/UPPER STRUCTURE FOR TRANSPORT MAY BECOME DAMAGED OR LOOSE OVER TIME. IF THE MAST HOLD-DOWN BRACKET SUSTAINS STRUCTURAL DAMAGE, IT MAY NO LONGER BE CAPABLE OF HOLDING THE TRAILER MAST IN PLACE DURING TRANSPORT.
The risk: THIS COULD RESULT IN UPPER STRUCTURE MOVEMENT AND COULD CONTRIBUTE TO THE TRAILER BECOMING UNSTABLE WHEN ROUNDING A CORNER, INCREASING THE RISK OF A CRASH.
The remedy: GENIE WILL PROVIDE A MAST CRADLE REPLACEMENT KIT TO OWNERS OF ALL AFFECTED MACHINES FREE OF CHARGE. THE RECALL BEGAN ON APRIL 5, 2007. OWNERS MAY CONTACT GENIE AT 866-927-7269.
GENIE INDUSTRIES, INC.Manufacturer number 060013View on NHTSA.gov
06V484000

ELECTRICAL SYSTEM

Dec 15, 2006
347 units potentially affected
The defect: ON CERTAIN TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, THE OUTRIGGERS (STABILIZERS) CAN FUNCTION WHEN THE MACHINE IS NOT IN A FULLY STOWED POSITION.
The risk: THE DOWN LIMIT SWITCH AND ITS LOCATION ON THE MACHINE ALLOW THE LIMIT SWITCH TO BE ACTIVATED WHEN IT COMES IN CONTACT WITH THE BOOM ARM, MAKING IT POSSIBLE TO RAISE THE OUTRIGGERS WHILE THE PLATFORM IS ELEVATED, INCREASING THE RISK OF INJURY TO THE OPERATOR.
The remedy: GENIE WILL PROVIDE A LIMIT SWITCH REPLACEMENT KIT AND INSTALLATION INSTRUCTIONS TO OWNERS OF ALL AFFECTED MACHINES. THE RECALL BEGAN ON JANUARY 11, 2007. OWNERS MAY CONTACT GENIE AT 1-877-738-7530.
GENIE INDUSTRIES, INC.Manufacturer number 060010View on NHTSA.gov
06V169000

STEERING:LINKAGES

May 18, 2006
5,072 units potentially affected
The defect: ON CERTAIN TRUCKS, DURING ASSEMBLY, THE DRAG LINK ATTACHMENT NUTS AT THE PITMAN ARM AND STEERING ARM MAY HAVE BEEN INCORRECTLY TORQUED. RESIDUAL GREASE AND PAINT WHICH WAS APPLIED AS A RUST INHIBITOR ON THE STEERING ARM MAY HAVE CONTRIBUTED TO A LOSS OF TORQUE AFTER ASSEMBLY.
The risk: INCREASED WEAR FOR THE DRAGLINK CONNECTIONS CAN OCCUR CREATING A NOTICEABLE INCREASE IN THE AMOUNT OF STEERING WHEEL FREE PLAY. IF THIS CONDITION WAS IGNORED, A LOSS OF STEERING CONTROL OF THE VEHICLE COULD OCCUR WHICH COULD RESULT IN A CRASH.
The remedy: DEALERS WILL INSPECT THE STEERING ARM TIGHTNESS AND REMOVE ALL GREASE AND PAINT FROM THE STEERING ARMS AND RETORQUE THE DRAGLINK ATTACHMENT NUTS AT THE STEERING ARM AND PITMAN ARM. THE RECALL BEGAN ON MAY 12, 2006. OWNERS MAY CONTACT HINO AT 1-248-648-6430.
HINO MOTORS SALES U.S.A., INC.Manufacturer number M0050View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .