2017 Grand Design Solitude Problems

BOUGHT NEW, AFTER 6 MONTHS OF USE THE BRAKES FAILED. THE LIPPERT AXLES ON THE COACH HAD FAILURE ON THE SEALS AND COATED THE BRAKES WITH GREASE. THIS IS A SAFETY ISSUE ON A 16,000 TRAILER WITH NO BRAKES. LIPPERT KNOWS ABOUT THIS ISSUE BUT HAS NOT ISSUED A RECALL ON ALL OF THE TRAILERS WITH THEIR AXLES. MOST OF THE GRAND DESIGN COACHES ARE HAVING THIS PROBLEM

OVER SERVICED WHEEL BEARING HUBS AT FACTORY BY LCI CAUSED FAILURE OF REAR BEARING GREASE SEALS ON ALL 4 WHEELS CONTAMINATING BRAKE PADS RENDERING BRAKING INEFFECTIVE WHEN IN MOTION MAKING IT UNABLE TO STOP QUICKLY IN AN EMERGENCY.

The steel Frame of the 5th wheel trailer developed broken welds and cracked metal tubing. This information should be included in the following current investigation. ODI PE24029

The contact owns a 2017 Grand Design Solitude RV. The contact stated that while driving, the rear axle suspension separated from vehicle. The contacted noticed that the rear axle shifted three inches towards the driver’s side. The vehicle was taken to a rest stop where an independent mechanic replaced the left and right leaf springs. The local dealer was not contacted. The manufacturer was notified of the failure, but no further assistance was provided. The approximate failure mileage was 8,000.

The contact owns a 2017 Grand Design Solitude. The contact stated that while driving at various speeds, the contact became aware of a gap in the corner of the RV overhang, in the transition to the vehicle upper deck down to the lower deck. The contact became aware of movement underneath the fiberglass. Additionally, the contact stated that the bedroom doors were stuck, but upon setting the RV down on the jack stands, the doors became functional. There were several cracks in the aluminum frame and in the welds. The contact had contacted a welder, who performed welding on the defective areas. The RV was taken to the dealer, who sent more pictures of the failure to the manufacturer. The dealer replaced the front aluminum frame and the pilon underneath the fiber glass; however, the failure recurred. Additionally, the contact noticed that the bedroom flooring had become raised. The RV was taken back to the dealer, where it was diagnosed and determined that there were more fractures in the beams underneath the bedroom, and that the fractures were extensive. The dealer forwarded a claim to the manufacturer with pictures of the failure; however, the claim was denied. The RV was not repaired. The contact related the failure to NHTSA Action Number: PE24029 (Structure). The failure mileage was approximately 55,000.

The steel Frame of the 5th wheel trailer developed broken welds and cracked metal tubing. This information should be included in the following current investigation. ODI PE24029

OVER SERVICED WHEEL BEARING HUBS AT FACTORY BY LCI CAUSED FAILURE OF REAR BEARING GREASE SEALS ON ALL 4 WHEELS CONTAMINATING BRAKE PADS RENDERING BRAKING INEFFECTIVE WHEN IN MOTION MAKING IT UNABLE TO STOP QUICKLY IN AN EMERGENCY.