RoadVitals

2009 Harley-Davidson Flstsb

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest Apr 3, 2014
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Jun 10, 2009
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 1 NHTSA owner-reported complaint for the 2009 Harley-Davidson Flstsb, most frequently naming the brakes category. 1 safety recall has been issued covering this model year; and 13 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Brakes1100.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
09V211000

SERVICE BRAKES, HYDRAULIC

Jun 10, 2009
11,005 units potentially affected
The defect: HARLEY DAVIDSON IS RECALLING 11,005 FLSTSB, FXSTSSE2, AND FXSTSSE3 MY 2008 AND 2009 MOTORCYCLES. THE ACORN STUD AT THE BRAKE REACTION LINK MAY FALL OUT DURING USE.
The risk: IF THIS OCCURS, THE FRONT BRAKE AND FENDER ASSEMBLY WOULD NO LONGER BE ADEQUATELY RETAINED. THIS CONDITION COULD LEAD TO A CRASH AND POTENTIAL INJURY TO OR DEATH OF THE RIDER.
The remedy: DEALERS WILL REPLACE THE EXISTING ACORN STUD WITH A NEW ACORN STUD AND RETAINING CLIP. THE RECALL BEGAN ON JUNE 2009. OWNERS MAY CONTACT HARLEY DAVIDSON AT 1-414-343-4056.
HARLEY-DAVIDSON MOTOR COMPANYManufacturer number 0139View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Brakes
Filed Apr 3, 2014

PART NUMBER 44097-97 FRONT BRAKE MOUNT BRACKET BROKE AT BOLT LOBE. *TR

NHTSA ID
10577040
Incident
Jan 10, 2014
Mileage
19,679 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

M1684

ELECTRICAL SYSTEM

SERVICE BULLETIN M1684: MARKET SPECIFIC BATTERY INTRODUCTION. PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.

M1317

ENGINE

SERVICE BULLETIN M1317: NEW BALANCER BEARING REMOVER TOOL HD-48457-A. PURPOSE: The purpose of this bulletin is to inform dealers of an update to the BALANCER SHAFT REMOVER (PART NUMBER: HD-48457). When using these tools to remove the counter balancer assembly, the balance shaft bearing can remain in the crankcase. To remove the bearing without the balance shaft, additional tools were added to the balancer and bearing remover.

M1650

ENGINE; FUEL/PROPULSION SYSTEM; POWER TRAIN; VEHICLE SPEED CONTROL

SERVICE BULLETIN M1650: MILWAUKEE EIGHT AND TWIN CAM CAMSHAFT DRIVE GEAR RETENTION KIT CHANGES. PURPOSE: This bulletin informs dealers that changes have been made to the Camshaft Drive Gear Retention Kit and service proceduresfor the Milwaukee-Eight and Twin Cam applications. In an effort to increase the clamp load of the camshaft drive sprocket bolted joint and prevent the drive bolt from loosening in high lift camshaft applications, the following changes have been made: a. The camshaft drive bolt final torque has been increased to 40 ft-lbs (54 N·m) for all Milwaukee-Eight and certain Twin Cams models. See Vehicles Affected. This increase in torque will make the bolt a one time use application. Never re-use a camshaft drive bolt for service after tightening to the increased specification. See service manual for updated procedure. b. A new camshaft drive gear retention kit (Part No. 91800088) has been created. This new kit is compatible with all Milwaukee-Eight and Twin Cam engines using Parts and Accessories (P&A) camshaft and Original Equipment (OE) camshaft applications. See Instruction sheet for specific fitment on Twin Cam OE camshaft applications. The new kit utilizes friction washers to prevent unwanted rotation of components in the drive sprocket bolted joint under stress. The use of liquid threadlocker on the threads of the bolt and pre-lube to the head of the bolt flange and outside of the washer help the bolt reach full stretch when tightening. NOTE: Engines produced at all Harley-Davidson Motor Company (HDMC) plants will not come with the new kits installed. They will continue to be produced with (Part No. 25566-06).

M1555

ELECTRICAL SYSTEM

SERVICE BULLETIN M1555 (REV E): BATTERY WARRANTY GUIDELINES. PURPOSE: Revision E. Added: Added procedures for the DCA-8000 E Battery Tester.* Updated: All sections. This bulletin informs the dealership network that Harley-Davidson has provided guidelines for battery warranty.

M1490

ELECTRICAL SYSTEM

SERVICE BULLETIN M1490 (V 24.8.8): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.

PAB1158

ENGINE; POWER TRAIN

GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1158: OIL FILTER PACKAGING AND CASE QUANTITY UPDATE. PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Harley-Davidson Flstsb by model year
YearComplaintsRecallsInvestigationsIssue Index
2011000—
2010000—
2009Viewing110—
2008111—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.