Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Our database contains 3 NHTSA owner-reported complaints for the 2003 Harley-Davidson Fxdwg, most frequently naming the fuel system, engine and powertrain (other) categories. 1 safety recall has been issued covering this model year; and 5 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 2 months of data.
Complaints grouped by the component NHTSA recorded
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govEXTERIOR LIGHTING:TAIL LIGHTS
Reports submitted to NHTSA, shown in the owner's own words
AFTER A LONG DAY OF RIDING WHEN SHUTTING OFF MOTOR HEARD A NOISE IN THE PRIMARY CHAIN AREA REMOVED COVER TO FIND THAT THE ENGINE COMPENSATOR NUT WAS EXTREMELY LOOSE ABOUT TO FALL OFF I HAVE NEVER TOUCHED THIS AREA AND HAVE PERFORMED THE ROUTINE MAINTENANCE ON THE BIKE IE OIL CHANGES AND INSPECTION AS I'VE READ SEVERAL MODEL YEAR BIKES HAVE HAD THE SAME PROBLEM IF THE NUT WOULD HAVE COME OUT COMPLETELY THIS SURELY WOULD HAVE CAUSE AN ACCIDENT EVEN DEATH IF I WAS GOING AT HIGHWAY SPEEDS. *TR
THIS IS A MODIFICATION TO COMPLAINT 10107892 WHICH HAD THE WRONG PHONE NUMBER. MY 2003 HARLEY FXDWG WAS RIDDEN TO ORANGE COUNTY HARLEY DAVIDSON AND SAT IN THE SUN FOR 1 HOUR. THE TEMP WAS 64-70. I HAD HALF A TANK OF GAS, WHICH WAS CHEVRON 91 OCT. GETTING BACK ONTO THE 405 FREEWAY AT 70 MPH THE BIKE FELT AS IF IT LACKED POWER. AFTER 30 SEC THE BIKE STARTED SPUTTERING AS IF IT WAS NOT GETTING ENOUGH GAS OR WAS VAPOR LOCKING CAUSING ME TO LOSE SPEED AND POWER. THIS SPUTTERING CONTINUED FOR 3-4 MILES, AFTER WHICH I COMPLETELY BACKED OFF THE THROTTLE AND JUST BARELY OPENED IT, WHICH AFTER APPROXIMATELY. 30 SEC THE BIKE REGAINED FULL POWER (GOT THE GAS IT NEEDED) AND I HAD NO MORE TROUBLE. THIS IS THE THIRD TIME THIS HAS HAPPENED. THE FIRST TIME, APRIL 04 THE BIKE COMPLETELY STOPPED RUNNING 5-6 TIMES ON THE FREEWAY BUT STARTED AGAIN ON THE SIDE OF THE ROAD. THE SECOND TIME JULY 2004 THE BIKE SPUTTERED AND BACK FIRED. THE CAUSE ALWAYS SEEMS TO BE THE SAME, THE BIKE SITS IN THE SUN 1-2 HOURS AND THEN ACCELERATING ONTO THE FREEWAY AT A HIGH SPEED THE BIKE DOES NOT GET ENOUGH GAS AND LOSES POWER. WESTMINISTER HARLEY DAVIDSON IN CA HAS TALKED WITH THE FACTORY AND TRIED TWICE TO FIX THIS PROBLEM. I CONSIDER THIS LOSS OF POWER AT FREEWAY SPEEDS A SAFETY ISSUE WHICH COULD LEAD TO A CRASH OR DEATH. *NM
MY 2003 HARLEY FXDWG WAS RIDDEN TO ORANGE COUNTY HARLEY AND SAT IN THE SUN FOR 1 HOUR. THE TEMP WAS 64-70 AND I HAD HALF A TANK OF GAS, WHICH WAS CHEVRON 91 OCT. GETTING BACK ONTO THE 405 FREEWAY AT 70 MPH THE BIKE FELT AS IF IT LACKED POWER. AFTER 30 SEC THE BIKE STARTED SPUTTERING AS IF IT WASN'T GETTING ENOUGH GAS OR WAS VAPOR LOCKING CAUSING ME TO LOSE SPEED AND POWER. THIS SPUTTERING CONTINUED FOR 3-4 MILES. I FINALLY COMPLETELY BACKED OF THE THROTTLE AND JUST BARELY OPENED IT, WHERE AS AFTER ABOUT 30 SEC THE BIKE REGAINED FULL POWER (GOT GAS IT NEEDED) AND I HAD NO MORE TROUBLE. THIS IS THE THIRD TIME THIS HAS HAPPENED. THE FIRST TIME, APRIL 04 THE BIKE COMPLETELY STOPPED RUNNING 5-6 TIMES ON THE FREEWAY BUT STARTED AGAIN ON THE SIDE OF THE FREEWAY. THE SECOND TIME JULY 2004 THE BIKE SPUTTERED AND BACK FIRED. THE CAUSE ALWAYS SEEMS TO BE THE SAME, IT SITS IN THE SUN 1-2 HOURS AND THEN ACCELERATING ONTO THE FREEWAY AT A HIGH SPEED THE BIKE DOES NOT GET ENOUGH GAS AND LOSES POWER. WESTMINISTER HARLEY DAVIDSON IN CA HAS TALKED WITH THE FACTORY AND TRIED TWICE ALREADY TO FIX IT. I CONSIDER THIS LOSS OF POWER AT FREEWAY SPEEDS A SAFETY ISSUE WHICH COULD LEAD TO A CRASH OR DEATH. *NM
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1684: MARKET SPECIFIC BATTERY INTRODUCTION. PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1490 (V 24.8.8): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.
ENGINE; POWER TRAIN
GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1158: OIL FILTER PACKAGING AND CASE QUANTITY UPDATE. PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1490 (V 24.6.4): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.6.4. Release Date: Week of May 1, 2024. New Features for LiveWire S2DM and S2MH, 2024 Revolution® Max, and 2024 Touring.
POWER TRAIN
TECH ARTICLE TA0023: TA0023: Crankshaft Rod Bearing. Purpose: Technicians have been falsely identifying connecting rod bearings as failed due to a perception of resistance as the rods are rotated. The clearance of the Twin Cam and Milwaukee-Eight® crank pin bearings are maintained to a very tight range. This optimizes performance and maintains low mechanical noise in operation. The connecting rod bore can also distort slightly in operation due to stress relaxation. As a result, bearing clearance decreases due to the contact zone broadening and the load being distributed over more rollers. The combination of a bore being slightly out of round and reduced bearing clearance can result in varying degrees of resistance through the range of motion. Axial clearance is also tightly controlled for proper alignment. For these reasons, zones of resistance can be found when the connecting rods are rotated by hand through their range of motion. Resistance during rod motion, by itself, is not an indication of a performance or durability concern.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.