RoadVitals

1992 Home And Park Roadtrek Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Mar 2, 1993
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

EQUIPMENT:ELECTRICAL

Mar 2, 1993
969 units potentially affected
The defect: THE GENERATOR EXHAUST PIPE, LOCATED AT THE REAR ROADSIDE OF THE VEHICLE, CAN EMIT HOT EXHAUST GASES FROM A DAMAGED, WORN, DEFECTIVE, OR IMPROPERLY INSTALLED EXHAUST PIPE, MELTING THE ADJACENT POLYETHYLENE STORAGE TRUNK.
The risk: THE DAMAGED STORAGE TRUNK ALLOWS GENERATOR AND/OR VEHICLEEXHAUST GASES TO ENTER THE VEHICLE, RESULTING IN A HAZARD TO VEHICLE OCCUPANTS.
The remedy: REPLACE ANY DEFECTIVE GENERATOR EXHAUST PIPES, REPAIR HOLES IN THE POLYETHYLENE STORAGE TRUNK, AND INSTALL A HEAT SHIELD BETWEEN THE GENERATOR EXHAUST PIPE AND THE STORAGE TRUNK.
HOME & PARK MOTORHOMESView on NHTSA.gov
Nov 2, 1992
1,855 units potentially affected
The defect: 1) THE SEAT SYSTEM SLIDE TRACKS DO NOT ALLOW THE SEATS TO SLIDE, AND THERE IS AN INCORRECT ANGLE OF THE UPPER TORSO SAFETY BELT CAUSED BY NON-CHRYSLER HARDWARE AT THE SHOULDER SAFETY BELT ANCHORAGES.
The risk: THE VEHICLES DO NOT MEET THE REQUIREMENTS OF FMVSS 207,"SEATING SYSTEMS" AND FMVSS 210 "SAFETY BELT ASSEMBLY ANCHORAGES". OCCUPANTS OFTHE AFFECTED SEATS WOULD NOT BE SUFFICIENTLY PROTECTED IN THE EVENT OF A SUDDENSTOP OR ACCIDENT.
The remedy: REPLACE THE DEFECTIVE SEAT SLIDES WITH A STRONGER DOUBLE LOCKING SLIDE TRACK; REPLACE THE LONG SLIDE TRACKS WITH SHORTER SLIDE TRACKS, AND REPLACE THE NON-CHRYSLER SAFETY BELT ANCHORAGES WITH CONFORMING CHRYLSER HARDWARE.
HOME & PARK MOTORHOMESView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources