RoadVitals

2007 Honda Fit Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
11
Newest Dec 10, 2020
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

11 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

20V770000

POWER TRAIN:DRIVELINE:DRIVESHAFT

Dec 10, 2020
248,358 units potentially affected
The defect: Honda (American Honda Motor Co.) is recalling certain 2013-2015 Acura ILX, 2013 Acura ILX Hybrid, 2012 Honda Civic Hybrid, and 2007-2008 Honda Fit vehicles with a manual transmission and 2009-2013 Honda Fit vehicles originally sold, or ever registered, in Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The drive shafts' protective coating may not have been applied properly during manufacturing, making it more susceptible to damage from road salt, or other contaminants, and potentially cause it to break.
The risk: A broken drive shaft may cause a sudden loss of drive power. The vehicle could also roll away if the parking brake has not been applied before the vehicle has been exited. Either condition can increase the risk of a crash or injury.
The remedy: Honda will notify owners, and dealers will inspect the drive shafts, replacing either the left or right drive shaft, if necessary, free of charge. Owners were notified of the safety risk with an interim letter mailed February 2, 2021. A second letter will be sent once the remedy is available. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are P9M, PAV, BAY, TAX, CA0, and MAZ.
Honda (American Honda Motor Co.)Manufacturer number P9M, PAV, BAY, TAXView on NHTSA.gov
19V501000

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Jun 27, 2019
1,657,752 units potentially affected
The defect: Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
The risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
The remedy: Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are E5D and X5C.
Honda (American Honda Motor Co.)Manufacturer number E5D, X5CView on NHTSA.gov
19V182000

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Mar 6, 2019
1,101,534 units potentially affected
The defect: Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The affected vehicles received a replacement driver air bag inflator as part of a previous Takata inflator recall remedy or a replacement driver air bag module containing the same inflator type as a service part. Due to a manufacturing error, in the event of a crash necessitating deployment of the driver frontal air bag, these inflators may explode.
The risk: An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
The remedy: Honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began April 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is O41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is U40.
Honda (American Honda Motor Co.)Manufacturer number U40,M45,O41,G44View on NHTSA.gov
18V268000

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Apr 26, 2018
1,335 units potentially affected
The defect: Honda (American Honda Motor Co.) is recalling certain 2003-2012 Honda Accord and Pilot, 2010 Accord Crosstour, 2001-2011 Civic, 2002-2011 CR-V, 2003-2004, 2006-2008 and 2011 Element, 2007 and 2009-2013 Fit, 2010-2012 Insight, 2002-2004 Odyssey, and 2012 Ridgeline vehicles. The front passenger air bag may have been installed incorrectly during replacement.
The risk: An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury.
The remedy: Honda will notify owners, and dealers will inspect and, if necessary, replace the passenger frontal air bag module assembly, free of charge. The recall began June 22, 2018. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are K1P, and M1O.
Honda (American Honda Motor Co.)Manufacturer number C1X, N2L, U2MView on NHTSA.gov
17V029000

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Jan 10, 2017
308,884 units potentially affected
The defect: Honda (American Honda Motor Co.) is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2011 Honda Element vehicles, 2005-2012 Acura RL vehicles, 2006-2012 Honda Ridgeline vehicles, 2007-2008 Honda Fit vehicles and 2005-2008 Honda Pilot vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, if not included in "Zone A" above, Honda is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2009 Acura RL and Honda Element vehicles, 2007-2008 Honda Fit vehicles, 2005-2008 Honda Pilot vehicles and 2006-2009 Honda Ridgeline vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, if not included in "Zone A" or "Zone B" above, Honda is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2008 Acura RL, Honda Element and Honda Pilot vehicles, 2007-2008 Honda Fit vehicles and 2006-2008 Honda Ridgeline vehicles originally sold, or ever registered in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
The risk: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
The remedy: Honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan March 2017. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KD9 and KE0.
Honda (American Honda Motor Co.)Manufacturer number KD9, KE0View on NHTSA.gov
16V344000

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

May 23, 2016
1,790,894 units potentially affected
The defect: Honda (American Honda Motor Co.) is recalling certain model year 2003-2006 Acura MDX, 2005-2011 Acura RL, 2005-2006 Honda CR-V, 2003-2011 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2011 Ridgeline vehicles originally sold, or that have ever been registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Honda is recalling certain model year 2003-2006 Acura MDX, 2005-2008 Acura RL, 2005-2006 Honda CR-V, 2003-2008 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2008 Ridgeline vehicles originally sold, or that have ever been registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Honda is recalling model year 2002-2004 Odyssey and model year 2003-2004 Acura MDX, Honda Element, and Honda Pilot vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
The risk: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
The remedy: Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 27, 2016. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KA0, KA1, KA2, and KA3.
Honda (American Honda Motor Co.)Manufacturer number KA0, KA1, KA2, KA3View on NHTSA.gov
13V260000

VISIBILITY:POWER WINDOW DEVICES AND CONTROLS

Jun 24, 2013
143,083 units potentially affected
The defect: Honda is re-recalling certain model year 2007-2008 Fit vehicles covered under previous recall 10V-033. The remedy applied in this earlier recall may have been insufficient. In the affected vehicles, over time, the plastic cover may separate from the master power window switch allowing water to enter the driver's window and reach the master power window switch. If the master power window switch is damaged as a result of the water intrusion, overheating and failure of the switch may result.
The risk: An overheated switch can cause smoke, melting and fire.
The remedy: Honda will notify owners in July 2013 and will instruct owners to take their vehicles to dealers to have a free inspection conducted. If the switch is damaged, it will be replaced free of charge. If the switch is not damaged, the owner will be instructed to await a second notification that will instruct them to return to the dealer to have a replacement switch installed free of charge. Honda anticipates it will have sufficient parts inventory to notify owners of vehicles with undamaged switches to return to dealers for replacement switches in Fall 2013. Renotification was sent out to owners on July 23, 2014. Owners may contact Honda at 1-800-999-1009. Honda's recall number is JA6.
Honda (American Honda Motor Co.)Manufacturer number JA6View on NHTSA.gov
10V624000

EXTERIOR LIGHTING:HEADLIGHTS:HIGH/LOW BEAM DIMMER SWITCH

Dec 15, 2010
143,083 units potentially affected
The defect: HONDA IS RECALLING MODEL YEAR 2007-2008 HONDA FIT VEHICLES. DUE TO AN ERROR DURING INSTALLATION OF THE WIRING HARNESS FOR THE COMBINATION SWITCH THAT CONTROLS LOW HEAD BEAM FUNCTION, THE WIRES FOR THE LOWER BEAM CIRCUIT WERE PULLED TIGHTER THAN INTENDED. AFTER REPEATED USE OF THE HEADLIGHT SWITCH, THE ELECTRICAL CONNECTOR TERMINAL FOR THE LOW BEAM HEADLIGHT CIRCUIT CAN BECOME WORN AS A RESULT OF THIS TENSION, WHICH CAN RESULT IN LOW CONDUCTIVITY AND CAUSE AN ACCUMULATION OF COPPER OXIDE IN THE AREA OF THE CONTACTS.
The risk: THE LOW BEAM HEADLIGHTS CAN BECOME INOPERATIVE DECREASING THE DRIVER'S VISIBILITY AS WELL AS THE VEHICLE'S VISIBILITY TO OTHER DRIVERS, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSPECT THE LOW BEAM TERMINAL AND PERFORM NECESSARY REPAIRS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 24, 2011. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.
HONDA (AMERICAN HONDA MOTOR CO.)Manufacturer number R58View on NHTSA.gov
10V033000

VISIBILITY:POWER WINDOW DEVICES AND CONTROLS

Feb 2, 2010
141,000 units potentially affected
The defect: HONDA IS RECALLING CERTAIN MODEL YEAR 2007-2008 FIT VEHICLES. UNDER SEVERE CONDITION, WATER MAY ENTER THE DRIVER'S WINDOW AND REACH THE MASTER POWER WINDOW SWITCH. IF THE MASTER POWER WINDOW SWITCH IS DAMAGED AS A RESULT OF THE WATER INTRUSION, OVERHEATING AND FAILURE OF THE SWITCH MAY RESULT.
The risk: AN OVERHEATED SWITCH CAN CAUSE SMOKE, MELTING AND FIRE.
The remedy: DEALERS WILL INSPECT THE SWITCH AND INSTALL A COVER AROUND THE SWITCH HOUSING TO PREVENT WATER FROM ENTERING THE SWITCH. IF THE SWITCH IS DAMAGED, THE SWITCH WILL BE REPLACED AND A COVER WILL BE INSTALLED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DURING MARCH 19, 2010. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.
HONDA (AMERICAN HONDA MOTOR CO.)Manufacturer number R28View on NHTSA.gov
07V549000

AIR BAGS:FRONTAL

Dec 3, 2007
34,300 units potentially affected
The defect: ON CERTAIN VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA , WISCONSIN AND THE DISTRICT OF COLUMBIA. THE WIRE HARNESS FOR THE OCCUPANT DETECTION SYSTEM (ODS) AND THE OCCUPANT POSITION DETECTION SYSTEM (OPDS) IS ROUTED UNDERNEATH THE CARPET ON THE DRIVER'S SIDE FLOORBOARD. IN AREAS WHERE ROAD SALT IS USED, SALT FROM THE SNOW ON THE DRIVER'S SHOES WILL MELT AND MAY PENETRATE THE CARPET AND LEAK INTO THE WIRE HARNESS. IF THE HARNESS IS EXPOSED TO SALT BRINE, CORROSION MAY OCCUR AND THE WIRE MAY BREAK CAUSING THE SRS INDICATOR LIGHT TO ILLUMINATE. A FAILURE OF THE ODS AND OPDS MAY NOT DETECT THE PRESENCE OF A CHILD SEAT OR AN OUT-OF-POSITION PASSENGER AND DEPLOYMENT OF BOTH THE FRONT SEAT PASSENGER'S FRONTAL AND SIDE AIR BAGS WILL NOT BE SUPPRESSED.
The risk: IN THE EVENT OF A CRASH, A DEPLOYING FRONT PASSENGER AIR BAG OR FRONT PASSENGER'S SIDE AIR BAG WILL INCREASE THE RISK OF INJURY TO SMALL OR OUT-OF-POSITION OCCUPANTS.
The remedy: DEALERS WILL INSPECT AND REPLACE THE WIRE HARNESS. THE RECALL BEGAN ON DECEMBER 12, 2007. OWNERS MAY CONTACT HONDA AT 800-999-1009.
HONDA (AMERICAN HONDA MOTOR CO.)Manufacturer number Q66View on NHTSA.gov
06V270000

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Jul 26, 2006
1,190,000 units potentially affected
The defect: ON CERTAIN PASSENGER VEHICLES AND MOTORCYCLES, THE OWNER'S MANUALS CONTAIN INCORRECT CONTACT INFORMATION FOR THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S (NHTSA) VEHICLE SAFETY HOTLINE.
The risk: THE LANGUAGE IN THE OWNER'S MANUALS IS NOT IN ACCORDANCE WITH THE CURRENT MANDATORY REQUIREMENTS.
The remedy: HONDA WILL SEND A POSTCARD TO DEALERS AND OWNERS WITH THE CORRECT NHTSA VEHICLE SAFETY HOTLINE INFORMATION AND WITH INSTRUCTIONS TO INSERT THE CARD INTO THE "REPORTING SAFETY DEFECTS" SECTION OF THE OWNER'S MANUAL. THE RECALL BEGAN ON AUGUST 2, 2006. OWNERS MAY CONTACT HONDA AT 1-800-999-1009, ACURA AT 1-800-382-2238 OR HONDA MOTORCYCLES AT 1-866-784-1870.
HONDA (AMERICAN HONDA MOTOR CO.)View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE10037ClosedPreliminary Evaluation

Low Beam Headlights

Opened Sep 16, 2010
Closed Dec 20, 2010

In their Defect Information Report (DIR) of December 15, 2010, American Honda Motor Company, Inc. (Honda) notified NHTSA that it will conduct a safety recall of model year 2007 and 2008 Honda Fit vehicles to repair the headlights.The recall will remedy a defect in the low beam headlight circuit that can cause a total outage of the low beam headlights.Honda's DIR states: Due to a variation in the assembly sequence when installing the wiring harness for the combination switch that controls the headlights, the wires for the low beam headlight circuit can be pulled tighter than the wiring for the other functions controlled by the combination switch.After repeated use of the headlight switch, the electrical connector terminal for the low beam headlight circuit can become worn as a result of this tension, which can result in low conductivity and cause an accumulation of copper oxide in the area of the contacts.In some cases the poor conductivity may cause the terminal ends to melt within the wiring harness connector.If this occurs, the low beam headlights can become inoperative, increasing the risk of a crash. Honda dealer's will inspect the combination switch and wiring harness and remedy the defect free of charge.Please see safety recall file 10V624 for recall details

EXTERIOR LIGHTING:HEADLIGHTS:HIGH/LOW BEAM DIMMER SWITCHLed to recall 10V624000

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .