Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Our database contains 28 NHTSA owner-reported complaints for the 2003 Honda Honda Motorcycle, most frequently naming the engine, suspension and other / unspecified categories. 8 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
When owners filed reports about this model year
| Month | Complaints filed | Cumulative |
|---|---|---|
| May 2003 | 4 | 4 |
| Jun 2003 | 2 | 6 |
| Aug 2003 | 3 | 9 |
| Sep 2003 | 4 | 13 |
| Oct 2003 | 1 | 14 |
| Dec 2003 | 1 | 15 |
| Jan 2004 | 1 | 16 |
| Feb 2004 | 1 | 17 |
| Mar 2004 | 1 | 18 |
| Jun 2004 | 2 | 20 |
| Jul 2004 | 1 | 21 |
| Sep 2004 | 1 | 22 |
| Nov 2004 | 1 | 23 |
| Aug 2005 | 1 | 24 |
| Nov 2005 | 1 | 25 |
| Nov 2008 | 1 | 26 |
| Nov 2012 | 1 | 27 |
| Sep 2016 | 1 | 28 |
Complaints grouped by the component NHTSA recorded
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
No recalls in our database for this model year
That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.
Reports submitted to NHTSA, shown in the owner's own words
THE FRAME IS CRACKED. HONDA HAD A RECALL THAT IS NO LONGER HONORED. HONDA CUSTOMER SERVICE SAID BIKE WAS REPAIRED BUT THERE IS NO EVIDENCE OF THAT OR IT RECRACKED. THIS IS DEFINITELY A SAFETY ISSUE. IT WAS DISCOVERED BY SERVICE ON 9/12/13
THERE ARE CRITICAL NUTS AND BOLTS THAT MUST BE TORQUED TO SPECIFIC MANUFACTURER'S ASSEMBLY SPECIFICATIONS BY ALL HONDA POWERSPORTS DEALERS THAT ARE COMPLETING THE FINAL ASSEMBLY PROCESS FOR AMERICAN HONDA MOTOR COMPANY ON NEW HONDA MOTORCYCLES. IF THESE CRITICAL NUTS AND BOLTS ARE NOT TORQUED TO THE MANUFACTURER'S SPECIFIC SPECIFICATIONS, THEN THEY CAN COME LOOSE IF UNDER TIGHTENED OR THEY CAN COME LOOSE IF OVERTIGHTENED AND THE TREADS STRIP. THIS CAN CAUSE A MALFUNCTION OF THE MOTORCYCLE THUS POSSIBLY CAUSING AN ACCIDENT THAT CAN RESULT IN A SERIOUS INJURY OR DEATH. SOUTHERN HONDA POWERSPORTS IN CHATTANOOGA, TENNESSEE HAS NEVER USED ACTUAL TORQUE WRENCHES (THAT GAUGE THE POUNDS OF PRESSURE APPLIED WHEN TIGHTENING SPECIFIC NUTS AND BOLTS), AS REQUIRED IN THE FINAL ASSEMBLY PROCESS. THESE NUTS AND BOLTS IF NOT TORQUED CORRECTLY TO MANUFACTURER'S SPECIFICATIONS (I.E. TO A SPECIFIC NUMBER OF POUNDS) CAN COME LOOSE THUS CAUSING THE MOTORCYCLE OPERATOR TO LOOSE CONTROL. THIS CRITICAL SAFETY ISSUE AT SOUTHERN HONDA POWERSPORTS HAS BEEN CALLED TO AMERICAN HONDA MOTOR COMPANYS ATTENTION ON MANY OCCASIONS DURING THE LAST 5 YEARS BY A NUMBER OF PEOPLE. EVEN SIGNED, NOTARIZED, SWORN AFFIDAVITS BY INDIVIDUALS THAT HAVE ASSEMBLED NEW HONDA MOTORCYCLES AT SOUTHERN HONDA POWERSPORTS, ATTESTING TO THE ABOVE, HAVE BEEN SUBMITTED TO AMERICAN HONDA MOTOR COMPANY. NHTSA HAS PREVIOUSLY ESTABLISHED A PRECEDENT REQUIRING A SAFETY RECALL FOR THIS IDENTICAL TYPE MOTORCYCLE ASSEMBLY SAFETY ISSUE, BY ISSUING A "SAFETY RECALL" ON VICTORY MOTORCYCLES, NHTSA ID # 12V457000. AS A RESULT OF THE CRITICAL SAFETY CONCERNS ABOVE, AMERICAN HONDA MOTOR COMPANY MUST BE REQUIRED BY NHTSA TO RECALL EVERY IMPROPERLY ASSEMBLED HONDA MOTORCYCLE SOLD BY SOUTHERN HONDA POWERSPORTS, CHATTANOOGA, TN FROM FEBRUARY 2004 THRU CURRENT DATE 2012. *TR . .
TL*THE CONTACT OWNS A 2003 HONDA 900F (NA). WHILE RIDING 20 MPH ON WET ROAD CONDITIONS, THE SHIFTER FELL OFF AND THE CONTACT COULD NOT CHANGE GEARS. THE FAILURE OCCURRED WHILE DRIVING IN SIXTH GEAR. HE WAS INJURED WHILE GETTING OFF OF THE BIKE. THE DEALER STATED THAT THEY WOULD INSPECT THE VEHICLE. THE FAILURE AND CURRENT MILEAGES WERE 2,321.
FINAL DRIVE FLANGE BEARING FAILURE,2003 HONDA VTX 1800 RETRO MODEL MOTORCYCLE, I WAS REPLACING A WORN TIRE AND INSPECTED THE FLANGE BEARINGS,BOTH WERE NO GOOD,BALL BEARINGS AND SEAL MISSING FROM ONE AND THE OTHER DID NOT TURN,MY DEALER REPLACED THEM BOTH UNDER MY EXTENDED WARRANTY. *JB
DT: OWNS A HONDA GOLDWING WHICH HAS BEEN MODIFIED INTO A CONVERSION MOTOR BIKE WHICH TURNED THIS INTO A 3 WHEEL VEHICLE. CONSUMER FELT THERE WAS AN ISSUE WITH THE BRAKES. THE BRAKE PADS DESTROYED THE ROTORS. CONSUMER DID NOT HAVE A SENSOR LIKE THOSE ON A CAR ,BUT THERE WAS ONLY 4-5,000 MILES BEFORE THE ROTOR WERE DESTROYED. BECAUSE HONDA WAS A DUAL BRAKING SYSTEM ,SO IF LOSING THE REAR STILL HAS THE FRONT BRAKES, THE MOTOR BIKE CONVERSION FRONT BRAKES WERE NOT MODIFIED BUT REAR BRAKES WERE CONVERTED. THE DESIGN OF THE SOFT ROTORS WAS A PROBLEM, AND THEY USED A IRON ROTOR WITH A MOTORCYCLE DISC PAD WHICH WAS STRONG AND HARD WHICH DESTROYED THE ROTOR. WHEN THIS OCCURRED THE PADS BEGAN TO WEAR AS WELL. HAS BEEN TO DEALER TO REPLACE ROTORS AND PADS, BUT THEY WERE REPLACED WITH THE SAME DEFECTIVE ROTORS AND PADS. *AK
IGNITION SWITCH FAILED TO OPERATE INTERMITTENTLY WHEN STARTING. DEALER WAS NOTIFIED.*AK
THE CONSUMER STATED HIS FRIEND CAN START HIS MOTORCYCLE WITH HIS KEYS, BOTH VEHICLES HAVE THE SAME VIN NUMBER. *JB
CONSUMER STATED THAT THE SPEEDOMETER WAS INACCURATE. THE READING WAS OFF BY ABOUT 10%. CONSUMER CONTACTED THE MANUFACTURER, AND WAS TOLD THAT THIS WAS COMMON AND THAT THEY WERE ALLOWED 10% DEVIATION. *AK *NM
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
AIR BAGS
Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
AIR BAGS
Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, American Honda is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, American Honda will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
HONDA MC: INFORMATION PROVIDED REGARDING FAILURE OF REPLACING AND INSTALLING THE CORRECT FRONT BRAKE CALIPER BOLTS. MODEL CTX 1300. *PE
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
HONDA MC: TECHNICIAN NEWSLETTER IS BEING PROVIDED ON THE UPDATING OF MCS TESTER, ELECTRICAL COMPONENT FAILURE/REPAIR VERIFICATION, INSTRUCTIONS FOR INSTALLATION OF ACCESSORY. *PE
EQUIPMENT:OTHER:LABELS
LOAD CARRYING CAPACITY REDUCED LABEL FOR ALL HONDA VEHICLES. *PE
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
HONDA: WARRANTY EXTENSION-VEHICLE WARRANTY MILEAGE. CLASS ACTION LAWSUIT ALLEGING THAT THE ODOMETERS ON CERTAIN 2002-2006 HONDA MODELS WERE OVERSTATING MILEAGE. FEDERAL COURT PROVIDED FINAL APPROVAL OF SETTLEMENT ON 12/29/07. NO MODELS LISTED. *PE
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.