RoadVitals

2000 Indian Chief Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest May 5, 2003
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

03V191000

VISIBILITY:WINDSHIELD

May 5, 2003
3,625 units potentially affected
The defect: CERTAIN WINDSHIELDS THAT WERE SOLD AS STANDARD EQUIPMENT ON THESE MOTORCYCLES OR SOLD AS ACCESSORIES FOR ALL OTHER CHIEF MODELS MAY HAVE DEFECTIVE BRACKETS. THE BRACKETS THAT ATTACH THE WINDSHIELD TO THE MOTORCYCLE ARE FORMED SUCH THAT THE MOUNTING BOLTS ARE NOT FLUSH WITH THE BRACKET. THIS COULD PLACE EXCESSIVE STRESS ON THE BOLTS CAUSING THEM TO BREAK.
The risk: BROKEN MOUNTING BOLTS COULD LEAD TO THE WINDSHIELD COMING LOOSE AND EVEN FALLING OFF THE BIKE, POTENTIALLY STRIKING THE RIDER OR OTHERWISE CAUSING THE RIDER TO LOSE CONTROL OF THE MOTORCYCLE AND CRASH.
The remedy: DEALERS WILL REPLACE THE BRACKETS AND BOLTS ON THE WINDSHIELD. OWNER NOTIFICATION BEGAN MAY 30, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INDIAN MOTORCYCLE AT 1-888-899-2997.
INDIAN MOTORCYCLE COMPANYManufacturer number IMCSB-056View on NHTSA.gov
03V039000

ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR

Feb 10, 2003
7,947 units potentially affected
The defect: ON CERTAIN MOTORCYCLES EQUIPPED WITH COMPUFIRE BRAND SERIES TYPE VOLTAGE REGULATORS, IF DAMAGED, THE VOLTAGE REGULATOR CAN BECOME STUCK IN AN OPEN MODE THAT ALLOWS BATTERY VOLTAGE TO FLOW BACK THROUGH THE REGULATOR.
The risk: THIS CONDITION CAN POTENTIALLY CAUSE THE REGULATOR TO CATCH ON FIRE.
The remedy: DEALERS WILL INSPECT THE MOTORCYCLE AND, IF NECESSARY, REPLACE THE REGULATOR. OWNER NOTIFICATION BEGAN FEBRUARY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INDIAN MOTORCYCLE AT 1-888-899-2997.
INDIAN MOTORCYCLE COMPANYManufacturer number IMCSB-045View on NHTSA.gov
02V144000

STEERING: STEERING WHEEL/HANDLE BAR

May 30, 2002
4,765 units potentially affected
The defect: ON CERTAIN MOTORCYCLES, THE HANDLE BAR RISER TOP CLAMP COULD ALLOW EXCESSIVE MOVEMENT OF THE HANDLE BARS.
The risk: LOSS OF CONTROL OF THE MOTORCYCLE COULD OCCUR, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL FIT THE MOTORCYCLES WITH A NEW RISER TOP CLAMP. OWNER NOTIFICATION BEGAN MAY 31, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INDIAN MOTORCYCLE AT 1-408-846-7228.
INDIAN MOTORCYCLE COMPANYManufacturer number IMCSB-040View on NHTSA.gov
02V124000

SUSPENSION:REAR

May 3, 2002
4,590 units potentially affected
The defect: ON CERTAIN MOTORCYCLES EQUIPPED WITH REAR SHOCK ABSORBERS MADE BY SWAY-A-WAY, THE BOLTS THAT MOUNT THE REAR SHOCK ABSORBERS TO THE SWING ARM COULD BREAK.
The risk: THIS COULD RESULT IN THE COLLAPSE OF THE REAR SUSPENSION, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSPECT THE REAR SHOCK ABSORBERS AND REPLACE THEM IF NECESSARY. OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING MAY 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INDIAN AT 1-408-846-7228.
INDIAN MOTORCYCLE COMPANYManufacturer number IMCSB-039View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE02037ClosedPreliminary Evaluation

HANDLEBAR LOOSENING

Opened Mar 26, 2002
Closed May 24, 2002

ODI OPENED THIS INVESTIGATION AFTER RECEIVING ONE OWNER COMPLAINT REGARDING TWO INSTANCES OF HANDLEBAR LOOSENING ON A 2000 INDIAN CHIEF MODEL MOTORCYCLE.THIS WAS OCCURRING BECAUSE THE HANDLEBAR RISER CLAMP MATERIAL WAS TWW SOFT RESULTING IN INSUFFICIENT CLAMPING FORCE NECESSARY TO FULLY SECURE THE HANDLEBAR IN CERTAIN FORESEEABLE MANEUVERS.INDIAN IS RECALLING THE SUBJECT VEHICLES TO REPLACE THE INFERIOR RISER CLAMP WITH ANOTHER OF MORE ROBUST MATERIAL.

STRUCTURELed to recall 02V144000
PE01039ClosedPreliminary Evaluation

REAR SUSPENSION COLLAPSE

Opened Nov 21, 2001
Closed Apr 30, 2002

SIX MANUFACTURER INCIDENTS OF BROKEN REAR SUSPENSION SHOCK ABSORBER MOUNTING BRACKETS AND FORTY-TWO OF BROKEN SHOCK BOLTS.THE ORIGINAL SWAY-AWAY REAR SHOCK ABSORBERS (IDENTIFIED BY A BLACK HOUSING) ARE NOT ADEQUATE FOR THE SUBJECT BIKES' GVWR.SHOCK BOTTOMING (I.E., COIL BIND) CONSEQUENTLY OCCURS AT THE UPPER RANGE OF THE MACHINE'S WEIGHT CARRYING CAPACITY AND THE RESULTING LOADS BREAK THE SHOCK MOUNTING BRACKETS AND/OR BOLTS.INDIAN IS RECALLING THE SUBJECT MOTORCYCLES TO INSTALL SHOCK ABSORBERS FROM PROGRESSIVE SUSPENSION.THE PROGRESSIVES HAVE A GREATER LOAD CARRYING CAPABILTY AND MAY BE IDENTIFIED BY THE GOLD COLOR.WITH INDIAN'S RECALL, ODI IS CLOSING THIS PE.

SUSPENSIONLed to recall 02V124000

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .