RoadVitals

2001 Indian Spirit Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Aug 4, 2003
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

03V286000

STRUCTURE

Aug 4, 2003
6,570 units potentially affected
The defect: ON CERTAIN MOTORCYCLES, THE WELD ATTACHING THE FENDER MOUNT TO THE FRONT FORK MAY CRACK AND BREAK.
The risk: THIS COULD CAUSE THE FENDER MOUNT TO FAIL RESULTING IN THE FENDER COMING INTO CONTACT WITH THE WHEEL, RESULTING IN THE RIDER TO LOSE CONTROL OF THE MOTORCYCLE, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL BOLT A BRACKET ONTO EACH FRONT FORK. THIS BRACKET WILL HOLD THE FENDER MOUNT IN PLACE EVEN IF THE WELD FAILS. OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING AUGUST 2003. OWNERS SHOULD CONTACT INDIAN AT 1-888-899-2997.
INDIAN MOTORCYCLE COMPANYManufacturer number IMCSB-058View on NHTSA.gov
03V039000

ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR

Feb 10, 2003
7,947 units potentially affected
The defect: ON CERTAIN MOTORCYCLES EQUIPPED WITH COMPUFIRE BRAND SERIES TYPE VOLTAGE REGULATORS, IF DAMAGED, THE VOLTAGE REGULATOR CAN BECOME STUCK IN AN OPEN MODE THAT ALLOWS BATTERY VOLTAGE TO FLOW BACK THROUGH THE REGULATOR.
The risk: THIS CONDITION CAN POTENTIALLY CAUSE THE REGULATOR TO CATCH ON FIRE.
The remedy: DEALERS WILL INSPECT THE MOTORCYCLE AND, IF NECESSARY, REPLACE THE REGULATOR. OWNER NOTIFICATION BEGAN FEBRUARY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INDIAN MOTORCYCLE AT 1-888-899-2997.
INDIAN MOTORCYCLE COMPANYManufacturer number IMCSB-045View on NHTSA.gov
02V311000

VISIBILITY:WINDSHIELD

Nov 15, 2002
5,464 units potentially affected
The defect: ON CERTAIN MOTORCYCLES, THE FASTENERS THAT BOLT THE WINDSHIELD TO THE MOUNTING CLAMPS CAN BREAK, CAUSING THE WINDSHIELD TO COME PARTIALLY OR COMPLETELY OFF THE BIKE.
The risk: IF THIS HAPPENS WHILE THE MOTORCYCLE IS IN USE, THE RIDER COULD BE INJURED BY THE WINDSHIELD.
The remedy: DEALERS WILL REPLACE THE WINDSHIELDS. OWNER NOTIFICATION BEGAN JANUARY 16, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INDIAN MOTORCYCLE AT 1-888-899-2997.
INDIAN MOTORCYCLE COMPANYManufacturer number IMCSB-050View on NHTSA.gov
02V176000

SUSPENSION:FRONT

Jul 2, 2002
1,189 units potentially affected
The defect: ON CERTAIN MOTORCYCLES, THE PINCH BOLTS THAT CLAMP THE FRONT FORKS TO THE AXLE MAY BE 1/4" BOLTS OR 5/16" BOLTS MADE OF STAINLESS STEEL. IN BOTH CASES, THESE BOLTS MAY NOT BE OF SUFFICIENT STRENGTH OVER TIME TO CLAMP THE FRONT FORK TO THE AXLE TIGHTLY ENOUGH TO PREVENT AXLE ROTATION.
The risk: IF THE AXLE IS ALLOWED TO ROTATE, THE AXLE COULD COME OUT OF THE RIGHT FRONT FORK, COLLAPSING THE FRONT END, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSPECT THE FRONT FORKS TO DETERMINE WHETHER THE PINCH BOLTS ARE 1/4" OR 5/16" BOLTS MADE OF STAINLESS STEEL. IF THE FORKS ARE CLAMPED WITH 1/4" BOLTS, THE DEALER WILL REPLACE THE FORKS WITH FORKS DESIGNED WITH 5/16" BOLTS. IF THE FORKS ARE CLAMPED WITH 5/16" STAINLESS STEEL PINCH BOLTS, THE DEALER WILL REPLACE THE BOLTS WITH 5/16" BOLTS MADE OF ZINC PLATED STEEL. OWNER NOTIFICATION BEGAN JULY 9, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INDIAN AT 1-408-846-7228.
INDIAN MOTORCYCLE COMPANYView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE03024ClosedPreliminary Evaluation

HEADLIGHT SEPARATES

Opened Jun 4, 2003
Closed Aug 11, 2003

ODI AND INDIAN RECEIVED A TOTAL OF 6 REPORTS ALLEGING THE TEARDROP-SHAPED HEADLIGHT WAS SEPARATING FROM ITS RETAINING BRACKET ON THE SUBJECT MOTORCYCLES.SHORTLY AFTER OPENING THIS PE, INDIAN RECALLED THE VEHICLES TO CORRECT THE PROBLEM.ODI HAS CONFIRMED INDIAN'S CLAIM THAT THIS PROBLEM RELATES ONLY TO THOSE MODELS WITH TEARDROP HEADLIGHT BUCKET.

EXTERIOR LIGHTING:HEADLIGHTSLed to recall 03V258000
PE01039ClosedPreliminary Evaluation

REAR SUSPENSION COLLAPSE

Opened Nov 21, 2001
Closed Apr 30, 2002

SIX MANUFACTURER INCIDENTS OF BROKEN REAR SUSPENSION SHOCK ABSORBER MOUNTING BRACKETS AND FORTY-TWO OF BROKEN SHOCK BOLTS.THE ORIGINAL SWAY-AWAY REAR SHOCK ABSORBERS (IDENTIFIED BY A BLACK HOUSING) ARE NOT ADEQUATE FOR THE SUBJECT BIKES' GVWR.SHOCK BOTTOMING (I.E., COIL BIND) CONSEQUENTLY OCCURS AT THE UPPER RANGE OF THE MACHINE'S WEIGHT CARRYING CAPACITY AND THE RESULTING LOADS BREAK THE SHOCK MOUNTING BRACKETS AND/OR BOLTS.INDIAN IS RECALLING THE SUBJECT MOTORCYCLES TO INSTALL SHOCK ABSORBERS FROM PROGRESSIVE SUSPENSION.THE PROGRESSIVES HAVE A GREATER LOAD CARRYING CAPABILTY AND MAY BE IDENTIFIED BY THE GOLD COLOR.WITH INDIAN'S RECALL, ODI IS CLOSING THIS PE.

SUSPENSIONLed to recall 02V124000

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .