RoadVitals

2000 International Harvester 9000 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
8
Newest May 21, 2003
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

8 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

03V193000

SUSPENSION:FRONT:HUB

May 21, 2003
2,163 units potentially affected
The defect: ON CERTAIN HEAVY AND MEDIUM DUTY TRUCKS AND BUSES EQUIPPED WITH TRUCK HUB UNITS MANUFACTURED BY SKF EXCLUSIVELY FOR USE ON ARVINMERITOR'S FF98X SERIES NON-DRIVE STEER AXLES, THE HUB UNIT BEARINGS CAN WEAR PREMATURELY.
The risk: SEIZURE OF THE BEARINGS CAN CAUSE WHEEL SEPARATION OR WHEEL END FIRE.
The remedy: DEALERS WILL REPLACE ALL FRONT AXLE HUBS. OWNER NOTIFICATION BEGAN ON NOVEMBER 12, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 03510View on NHTSA.gov
03V137000

SERVICE BRAKES, AIR

Apr 3, 2003
2,818 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.
The risk: IF THE FITTING BREAKS, THE REAR SERVICE BRAKES WILL CEASE TO OPERATE WITHOUT WARNING, RESULTING IN AN EXTENDED STOPPING DISTANCE, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSTALL A KIT TO REMOUNT THE DOUBLE CHECK VALVE WITH A FLEXIBLE HOSE ON THE MAJORITY OF VEHICLES. ON A SMALL NUMBER OF UNITS WITH CLEARANCE ISSUES OR TRACTION CONTROL, A KIT WITH A NEW RELAY VALVE THAT HAS A BUILT-IN DOUBLE CHECK VALVE WILL BE INSTALLED. OWNER NOTIFICATION BEGAN ON APRIL 18, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 02506View on NHTSA.gov
02V135002

SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

May 20, 2002
108,560 units potentially affected
The defect: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.
The risk: IF THE FITTING BREAKS, THE REAR SERVICE BRAKES WILL CEASE TO OPERATE WITHOUT WARNING, RESULTING IN AN EXTENDED STOPPING DISTANCE, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSTALL A KIT TO REMOUNT THE DOUBLE CHECK VALVE WITH A FLEXIBLE HOSE ON THE MAJORITY OF VEHICLES. ON A SMALL NUMBER OF UNITS WITH CLEARANCE ISSUES OR TRACTION CONTROL, A KIT WITH A NEW RELAY VALVE THAT HAS A BUILT-IN DOUBLE CHECK VALVE WILL BE INSTALLED. OWNER NOTIFICATION BEGAN SEPTEMBER 11, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02506View on NHTSA.gov
01V140004

STEERING:LINKAGES:TIE ROD ASSEMBLY

Aug 2, 2001
18,348 units potentially affected
The defect: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS/DRAG LINKS. THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS.
The risk: IF THIS CONDITION OCCURS, THE DRIVER CAN LOSE STEERING CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
The remedy: DEALERS WILL REPLACE THE DRAG LINK ASSEMBLIES. OWNER NOTIFICATION BEGAN AUGUST 28, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 01510View on NHTSA.gov
00V232401

SERVICE BRAKES, AIR:ANTILOCK

Aug 21, 2000
62,480 units potentially affected
The defect: VEHICLE DESCRIPTION: TRACTORS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU). THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL.
The risk: THIS CONDITION COULD CAUSE THE ABS ECU TO EXHAUST THE AIR AT THE AIR BRAKE MODULATORS FOR ONE OR MORE OF THE WHEELS. THIS COULD RESULT IN EXTENDED BRAKING DISTANCES AND A POSSIBLE CRASH.
The remedy: DEALERS WILL REPLACE THE ABS ECU.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 00511View on NHTSA.gov
00V232301

SERVICE BRAKES, AIR:ANTILOCK

Aug 21, 2000
79,465 units potentially affected
The defect: VEHICLE DESCRIPTION: MEDIUM AND HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU). THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL.
The risk: THIS CONDITION COULD CAUSE THE ABS ECU TO EXHAUST THE AIR AT THE AIR BRAKE MODULATORS FOR ONE OR MORE OF THE WHEELS. THIS COULD RESULT IN EXTENDED BRAKING DISTANCES AND A POSSIBLE CRASH.
The remedy: DEALERS WILL REPLACE THE ABS ECU.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 00510View on NHTSA.gov
00V206000

EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH; VEHICLE SPEED CONTROL

Aug 1, 2000
28,010 units potentially affected
The defect: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE BRAKE LIGHT SWITCH AND THE CRUISE CONTROL SWITCH ARE MOUNTED IN SUCH A WAY AS TO ALLOW MOISTURE WITHIN THE AIR BRAKE SYSTEM TO COLLECT INSIDE THE SWITCHES. IF THE MOISTURE IN THE SWITCHES FREEZES, THE BRAKE LIGHTS MAY NOT FUNCTION AND THE CRUISE CONTROL MIGHT NOT DISENGAGE WHEN THE BRAKE PEDAL IS DEPRESSED.
The risk: IF THE SWITCHES FREEZE, THE RESULTS COULD BE NO BRAKE LIGHTS TO WARN FOLLOWING VEHICLES AND AN EXTENDED STOPPING DISTANCE IF THE CRUISE CONTROL DOES NOT DISENGAGE AS EXPECTED WHEN THE BRAKE PEDAL IS PRESSED.
The remedy: DEALERS WILL RE-MOUNT THE AIR MANIFOLD AND SWITCHES TO A PROVEN, TROUBLE-FREE ORIENTATION.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 00506View on NHTSA.gov
00V176000

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP

Jul 3, 2000
104,302 units potentially affected
The defect: VEHICLE DESCRIPTION: SCHOOL AND HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS. THE ABS SENSOR WIRES ON ROTATING PARTS CHAFES WHICH CAN LEAD TO A FALSE SIGNAL BEING SENT TO THE BENDIX ABS ELECTRONIC CONTROL UNIT (ECU).
The risk: THIS COULD CAUSE THE AIR ABS ECU TO EXHAUST THE AIR AT THE AIR BRAKE MODULATORS FOR ONE OR MORE OF THE WHEELS.
The remedy: DEALERS WILL INSPECT THE SENSOR WIRING ROUTING AND RE-ROUTE OR REPLACE THE ABS SENSORS AS REQUIRED.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 00505View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE02092ClosedPreliminary Evaluation

INTEGRAL HUB AND BEARING ASSEMBLY

Opened Dec 3, 2002
Closed May 23, 2003

THE COMPANIES INVOLVED IN THIS MATTER ARE:SKF (HUB MFR), ARVINMERITOR (FRONT AXLE MFR), AND INTERNATIONAL,( MANUFACTURERS OF MEDIUM DUTY TRUCKS).SKF IDENTIFIED MANUFACTURING DEFECTS FOR SPECIFIC BUILD DATES ON FRONT AXLE HUB AND BEARINGS (WHEEL BEARINGS) SUPPLIED TO ARVIN MERITOR.AS A RESULT, ARVINMERITOR NOTIFIED INTERNATIONAL OF AXLES SUPPLIES WITH POSSIBLE DEFECTIVE FRONT HUB ASSEMBLIES.AS A RESULT OF THAT NOTIFICATION, 2041 TRUCKS ARE BEING RECALLED BY INTERNATIONAL FOR DEFECTIVE FRONT AXLE WHEEL BEARINGS WHICH MAY FAIL IN SUCH A WAY THAT A WHEEL SEPARATION OR WHEEL BEARING FIRE OCCURS.SEE ATTACHED SUMMARY REPORT FOR ADDITIONAL DETAILS.

SUSPENSION:FRONT:HUBLed to recall 03V193000

Elsewhere on this vehicle

Data sources