RoadVitals

1979 International Harvester Paystar Series

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Nov 17, 1980
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 1979 International Harvester Paystar Series. 2 safety recalls have been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
80V148000

STEERING:LINKAGES:TIE ROD ASSEMBLY

Nov 17, 1980
19,500 units potentially affected
The defect: THE NUTS WHICH FASTEN THE TIE ROD ENDS TO THE STEERING ARMS MAY NOT HAVE BEEN TIGHTENED TO THE SPECIFIED 150 FT-LB TORQUE. INSUFFICIENTLY TIGHTENED TIE ROD END NUTS COULD LOOSEN, BREAK OFF THE LOCKING COTTER PIN, AND ALLOW THE TIE ROD TO DISENGAGE FROM THE STEERING ARM.
The remedy: THE DEALER WILL REMOVE THE LOCKING COTTER PIN, TIGHTEN THE NUT TO 150 FT-LBS AND REINSTALL THE COTTER PIN. BOTH LEFT AND RIGHT TIE ROD ENDS WILL BE TIGHTENED. THIS WILL BE DONE AT NO CHARGE.
INTERNATIONAL HARVESTERView on NHTSA.gov
79V211000

SERVICE BRAKES, AIR:DRUM

Sep 18, 1979
25,000 units potentially affected
The defect: AS A RESULT OF SEVERE SHOCK AND VIBRATIONS, THE BRAKE SPIDERS ON THE INVOLVED VEHICLES MAY DEVELOP CRACKS NEAR THE CAMSHAFT MOUNTING BOSS. THE CRACK PROPAGATES ACROSS THE SPIDER UNTIL THE CAMSHAFT BOSS IS COMPLETELY SEVERED FROM THE REMAINDER OF THE SPIDER. WHEN THE CAMSHAFT BOSS HAS COMPLETELY SEVERED, THE S-CAM, S-CAM BRACKET, AIR CHAMBER AND SLACK ADJUSTER CAN FALL AWAY FROM THE BRAKE SPIDER RESULTING IN A "NO BRAKE" CONDITION ON THE WHEEL.
The remedy: THE DEALER WILL REPLACE THE FRONT BRAKE SPIDERS ON ALL AFFECTED VEHICLES USED IN SNOW PLOW DUMP AND REFUSE HAULING APPLICATIONS. THIS WILL BE DONE AT NO CHARGE.
INTERNATIONAL HARVESTERView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Compare model years

Complaint and recall counts across every year of this model

International Harvester Paystar Series by model year
YearComplaintsRecallsInvestigationsIssue Index
1980010—
1979Viewing020—
1978030—
1977030—
1976010—
1975050—
1974060—
1973050—
1972010—
1971010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.