RoadVitals

2006 International 5600I Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Oct 5, 2009
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

09V386000

ENGINE AND ENGINE COOLING

Oct 5, 2009
9,527 units potentially affected
The defect: NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2008 HEAVY TRUCKS MANUFACTURED BETWEEN APRIL 1, 2003 AND DECEMBER 21, 2007, EQUIPPED WITH CATERPILLAR C15 ENGINES. THE VARIABLE VALVE ACTUATION (VVA) OIL LINE MAY WEAR AGAINST THE P-CLIPS RETAINING THE OIL LINE, CAUSING AN OIL LEAK.
The risk: AN OIL LEAK COULD RESULT IN A FIRE.
The remedy: NAVISTAR IS WORKING WITH CATERPILLAR TO REPAIR THE ENGINES FREE OF CHARGE. PLEASE SEE 09E-020. THE SAFETY RECALL BEGAN ON OCTOBER 23, 2009. OWNERS MAY CONTACT CATERPILLAR AT 1-800-447-4986 OR NAVISTAR AT 1-260-461-1890.
NAVISTAR, INCView on NHTSA.gov
05V569000

SERVICE BRAKES, AIR

Dec 21, 2005
2 units potentially affected
The defect: CERTAIN TRUCKS BUILT WITH A 8X6 WHEEL CONFIGURATION (TRIDEMS) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, 'AIR BRAKE SYSTEMS.' THE AS-BUILT AIR BRAKE COMPONENT SIZE AND CONFIGURATION ARE INADEQUATE FOR THE EXTENDED WHEELBASES CAUSING THE MID-REAR AND REAR-REAR AXLE BRAKE APPLY TIMING TO BE NONCOMPLIANT WITH THE STANDARD.
The risk: THE LONGER BRAKE APPLY TIME MAY RESULT IN EXTENDED STOPPING DISTANCES, WHICH COULD RESULT IN A CRASH.
The remedy: DEALERS WILL CHANGE THE AIR HOSING (TO 3/4" DIAMETER) FROM THE AIR TANK; AIR HOSING (TO 3/4") FROM THE ABS-MODULATOR VALVES TO SERVICE BRAKE QUICK RELEASE VALVES; AND THE SERVICE BRAKE QUICK RELEASE VALVES WILL BE UPGRADED WITH LARGER PORTS TO ACCOMMODATE HIGH AIR FLOW FREE OF CHARGE. THE RECALL BEGAN ON MARCH 10, 2006. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 05525View on NHTSA.gov
05V449000

POWER TRAIN:AXLE ASSEMBLY

Oct 4, 2005
4 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCK/TRACTORS EQUIPPED WITH ARVINMERITOR SERIES 145 AND 160 REAR DRIVE AXLES. THE SUSPECT REAR DRIVE AXLE'S SPINDLES MAY HAVE BEEN INCORRECTLY HEAT TREATED. SUCH A CONDITION LESSENS THE OVERALL STRUCTURAL INTEGRITY OF THE SPINDLES AND COULD RESULT IN ITS FRACTURE.
The risk: IF A SPINDLE FRACTURES WHILE THE VEHICLE IS IN MOTION, IT MAY CAUSE WHEEL SEPARATION, WHICH COULD, WITHOUT WARNING RESULT IN A VEHICLE CRASH.
The remedy: DEALERS WILL INSPECT THE SUSPECT VEHICLES AND IF THE SPINDLES ARE FOUND TO HAVE CERTAIN DATE CODES, THE AXLE WILL BE REPLACED. THE RECALL BEGAN ON OCTOBER 7, 2005. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 05520View on NHTSA.gov
05V448000

SEAT BELTS:FRONT:WEBBING

Oct 4, 2005
125 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCK/TRACTORS EQUIPPED WITH SEARS ATLAS SERIES 35, 70, OR 80 DRIVER'S SEATS, WHEN THE SEATS ARE IN THEIR LOWEST, MOST REARWARD ADJUSTED POSITION, THEY MAY CHAFE THE SEAT BELT TETHER THAT CONNECTS FROM THE SEAT TO THE BACK OF THE CAB.
The risk: THIS CHAFING MAY EVENTUALLY CUT THROUGH THE TETHER, THUS WEAKENING THE EFFECTIVENESS OF THE SEAT BELT ASSEMBLY IN A VEHICLE CRASH, POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
The remedy: DEALERS WILL INSPECT THE VEHICLES FOR SUSPECT SEAT CODES AND WILL REPLACE THE EXISTING 12" SEAT TETHERS WITH NEW 13.5" TETHERS. THE RECALL BEGAN ON OCTOBER 7, 2005. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 05519View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources