RoadVitals

2005 International 7400

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest Jan 23, 2007
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Latest Jun 4, 2007
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 1 NHTSA owner-reported complaint for the 2005 International 7400, most frequently naming the brakes category. 3 safety recalls have been issued covering this model year; and 89 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Brakes1100.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

3 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
07V222000

SUSPENSION:REAR:AXLE:SPINDLE

Jun 4, 2007
230 units potentially affected
The defect: ON CERTAIN TRUCKS, THE REAR-REAR AXLE BRAKE SLACK ADJUSTERS MAY CONTACT THE REAR AXLE HOUSING PREVENTING THE BRAKES FROM BEING FULLY APPLIED POSSIBLY CAUSING EXTENDED STOPPING DISTANCES.
The risk: EXTENDED STOPPING DISTANCES CAN CONTRIBUTE TO A VEHICLE CRASH THAT MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
The remedy: DEALERS WILL REPLACE ALL REAR-REAR AXLE BRAKE SPIDERS WITH A SPIDER THAT HAS A DIFFERENT BRAKE GROUP CLOCKING ANGLE FREE OF CHARGE. THE RECALL BEGAN ON JUNE 29, 2007. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 07509View on NHTSA.gov
05V188000

TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

Apr 28, 2005
4,616 units potentially affected
The defect: ON CERTAIN VEHICLES EQUIPPED WITH AIR OPERATED FIFTH WHEEL SLIDES AND AN MSVA 7-PACK ACCESSORY CONTROLLER, THE 7-PACK CAN ALLOW WATER TO CONTAMINATE ITS CIRCUIT BOARD. THIS COULD RESULT IN INADVERTENT OPERATION OF THE FIFTH WHEEL SLIDE CONTROL.
The risk: IF THE SLIDE CONTROL ACTUATES WHILE THE VEHICLE IS IN MOTION, MOMENTUM FROM THE TRAILER CAN CAUSE THE FIFTH WHEEL TO SLIDE WITHOUT INPUT FROM THE DRIVER, WHICH COULD RESULT IN A CRASH WITHOUT WARNING.
The remedy: DEALERS WILL RELOCATE THE MSVA 7-PACK TO A LESS WATER INTENSIVE ENVIRONMENT. A NEW MSVA 7-PACK BASE, THAT HAS BEEN IMPROVED TO PREVENT WATER INTRUSION, AND ALL AIR ACCESSORY SOLENOIDS WILL BE INSTALLED FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 5, 2005. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 05511View on NHTSA.gov
04V569000

STRUCTURE

Dec 3, 2004
17,443 units potentially affected
The defect: ON CERTAIN TRUCKS, THE BOLTS THAT MOUNT THE FRONT OF THE CAB TO THE MOUNTING BRACKETS WERE NOT PROPERLY TORQUED AT THE MANUFACTURING PLANT.
The risk: THESE BOLTS CAN LOOSEN DURING NORMAL VEHICLE USE AND FALL OUT. THIS MAY LEAD TO THE CAB SEPARATING FROM THE VEHICLE'S CHASSIS DURING A VEHICLE CRASH THAT MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
The remedy: AS AN INTERIM ACTION, DEALERS WILL PROPERLY TIGHTEN THE EXISTING CAB MOUNTING BOLTS AND REPLACE ANY MISSING BOLTS. AS SOON AS PARTS ARE AVAILABLE, DEALERS WILL REPLACE ALL SIXTEEN BOLTS AND TIGHTEN THEM PROPERLY. AN INTERIM LETTER WAS SENT TO OWNERS ON FEBRUARY 11, 2005. ANOTHER LETTER WAS SENT TO OWNERS ON APRIL 8, 2005, AS SOON AS PARTS ARE AVAILABLE. OWNERS SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 05502View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Brakes
Filed Jan 23, 2007

OUR AGENCY PURCHASED FOUR 2005, 7400 INTERNATIONAL TRUCKS TO BE USED AS FIRE APPARATUS. SINCE THE FIRST TRUCK WENT INTO SERVICE IN APRIL OF 2005 WE HAVE HAD A SERIES OF AIR COMPRESSOR FAILURES. THE HEAD GASKETS LEAK COOLANT INTO THE VEHICLE'S AIR SYSTEM. THIS REQUIRES REPLACEMENT OF THE AIR COMPRESSOR ALONG WITH THE AIR DRYER CARTRIDGE. THE FIRST VEHICLE IS GOING ON IT'S FIFTH UNIT. ANOTHER LEAKED COOLANT INTO THE MOTOR OIL AND SUBSEQUENTLY HAD TO HAVE THE ENGINE REPLACED. THE OTHER TWO VEHICLES HAVE HAD THE AIR COMPRESSOR HEAD GASKETS REPLACED TO TRY AND PREVENT A SIMILAR OCCURRENCE. THE AIR COMPRESSORS ARE MANUFACTURED BY BENDIX. *NM

NHTSA ID
10179482
Incident
Aug 2, 2005
Mileage
5,825 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

IK4300035

ELECTRICAL SYSTEM

This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files. It allows users to quickly load files either manually or directly from the Diamond Logic Builder Vehicles folder using VIN-based selection. As files are added or removed, the comparison runs automatically with no manual action required. The program presents results in an interactive table that shows feature codes, descriptions, access levels, and whether each feature is present in each selected file. Built-in search, filtering, and sorting make it easy to locate specific features or focus only on differences between files. Column visibility can be customized to show or hide descriptions and access information as needed. Users can remove files individually or clear all files at once, with results updating instantly. The tool also includes reporting and export options that reflect exactly what is visible on screen, allowing results to be printed, copied, saved as text, or exported to CSV for use in Excel or other spreadsheet tools. Overall, the program streamlines the process of comparing vehicle feature configurations, helping users quickly identify differences, validate setups, and document results without manual comparison or external tools.

IK2600047

ENGINE

Engine replacements for all International engines will need to follow this procedure.

IK1600272

STRUCTURE:BODY

This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle cabs and windshields using an ultrasonic sound detector.

IK0600030

POWER TRAIN

This document will guide the user through understanding Prop Shaft Codes and understanding the variations of prop codes. (Metric Prop codes start with the number a 4 and Non metric Prop codes start with a 2.)

IK1201009

STRUCTURE:BODY

In some geographic areas, ambient temperatures reaching below 15°F (-10 °C), including high levels of humidity, an operator may experience engine stalling, low performance, and or poor aftertreatment performance. This is caused by condensation accumulating and freezing within the Charge Air Cooler (CAC); affecting air flow into the engine. This article lists all the currently available winter front covers that can be installed on the front grille and bumper to reduce cold air flow to the engine compartment.

IK3400001

Title: Service Portal iKNow Feedback Case Types Applies To: All

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

International 7400 by model year
YearComplaintsRecallsInvestigationsIssue Index
2015010—
2014010—
2013010—
2012100—
2011040—
2010010—
2009030—
2008030—
2007060—
2006240—
2005Viewing130—
2004060—
2003140—
2002150—
1999000—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.