RoadVitals

2002 International 9000 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest May 21, 2003
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

03V193000

SUSPENSION:FRONT:HUB

May 21, 2003
2,163 units potentially affected
The defect: ON CERTAIN HEAVY AND MEDIUM DUTY TRUCKS AND BUSES EQUIPPED WITH TRUCK HUB UNITS MANUFACTURED BY SKF EXCLUSIVELY FOR USE ON ARVINMERITOR'S FF98X SERIES NON-DRIVE STEER AXLES, THE HUB UNIT BEARINGS CAN WEAR PREMATURELY.
The risk: SEIZURE OF THE BEARINGS CAN CAUSE WHEEL SEPARATION OR WHEEL END FIRE.
The remedy: DEALERS WILL REPLACE ALL FRONT AXLE HUBS. OWNER NOTIFICATION BEGAN ON NOVEMBER 12, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 03510View on NHTSA.gov
03V137000

SERVICE BRAKES, AIR

Apr 3, 2003
2,818 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.
The risk: IF THE FITTING BREAKS, THE REAR SERVICE BRAKES WILL CEASE TO OPERATE WITHOUT WARNING, RESULTING IN AN EXTENDED STOPPING DISTANCE, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSTALL A KIT TO REMOUNT THE DOUBLE CHECK VALVE WITH A FLEXIBLE HOSE ON THE MAJORITY OF VEHICLES. ON A SMALL NUMBER OF UNITS WITH CLEARANCE ISSUES OR TRACTION CONTROL, A KIT WITH A NEW RELAY VALVE THAT HAS A BUILT-IN DOUBLE CHECK VALVE WILL BE INSTALLED. OWNER NOTIFICATION BEGAN ON APRIL 18, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 02506View on NHTSA.gov
02V241002

SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Sep 20, 2002
3,156 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH BENDIX TC-7 TRAILER CONTROL HAND-OPERATED VALVE WITH PUSH-TO-CONNECT FITTINGS. THE DELIVERY PORT IN THE VALVE BODY MAY BE PARTIALLY BLOCKED DUE TO A PROBLEM DURING THE MODING PROCESS.
The risk: SUCH BLOCKAGE MAY SLOW THE DELIVERY AND EXHAUST OF AIR TO AND FROM THE TRAILER BRAKES WHEN THEY ARE OPERATED BY THIS HAND-OPERATED TRAILER CONTROL VALVE.
The remedy: INTERNATIONAL WILL REPLACE THE HAND-OPERATED CONTROL VALVES. OWNER NOTIFICATION BEGAN DECEMBER 31, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02512View on NHTSA.gov
02V135002

SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

May 20, 2002
108,560 units potentially affected
The defect: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.
The risk: IF THE FITTING BREAKS, THE REAR SERVICE BRAKES WILL CEASE TO OPERATE WITHOUT WARNING, RESULTING IN AN EXTENDED STOPPING DISTANCE, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSTALL A KIT TO REMOUNT THE DOUBLE CHECK VALVE WITH A FLEXIBLE HOSE ON THE MAJORITY OF VEHICLES. ON A SMALL NUMBER OF UNITS WITH CLEARANCE ISSUES OR TRACTION CONTROL, A KIT WITH A NEW RELAY VALVE THAT HAS A BUILT-IN DOUBLE CHECK VALVE WILL BE INSTALLED. OWNER NOTIFICATION BEGAN SEPTEMBER 11, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02506View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE02092ClosedPreliminary Evaluation

INTEGRAL HUB AND BEARING ASSEMBLY

Opened Dec 3, 2002
Closed May 23, 2003

THE COMPANIES INVOLVED IN THIS MATTER ARE:SKF (HUB MFR), ARVINMERITOR (FRONT AXLE MFR), AND INTERNATIONAL,( MANUFACTURERS OF MEDIUM DUTY TRUCKS).SKF IDENTIFIED MANUFACTURING DEFECTS FOR SPECIFIC BUILD DATES ON FRONT AXLE HUB AND BEARINGS (WHEEL BEARINGS) SUPPLIED TO ARVIN MERITOR.AS A RESULT, ARVINMERITOR NOTIFIED INTERNATIONAL OF AXLES SUPPLIES WITH POSSIBLE DEFECTIVE FRONT HUB ASSEMBLIES.AS A RESULT OF THAT NOTIFICATION, 2041 TRUCKS ARE BEING RECALLED BY INTERNATIONAL FOR DEFECTIVE FRONT AXLE WHEEL BEARINGS WHICH MAY FAIL IN SUCH A WAY THAT A WHEEL SEPARATION OR WHEEL BEARING FIRE OCCURS.SEE ATTACHED SUMMARY REPORT FOR ADDITIONAL DETAILS.

SUSPENSION:FRONT:HUBLed to recall 03V193000

Elsewhere on this vehicle

Data sources