RoadVitals

2002 International 9400 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Jan 29, 2007
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

07V020000

ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES

Jan 29, 2007
21,643 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR C10, C11, C12, C13, C15 OR C16 ENGINES, THE POSITIVE BATTERY CABLES THAT SUPPLY POWER FROM THE BATTERIES TO THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE ENGINE AND THE STARTER, AN ELECTRICAL GROUND CABLE BETWEEN THE FRAME RAIL AND THE STARTER, OR THE FRAME RAIL ITSELF.
The risk: THIS RUBBING MAY CAUSE AN ELECTRICAL SHORT OR A FIRE WHICH CAN RESULT IN PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
The remedy: DEALERS WILL INSPECT THE BATTERY CABLES TO DETERMINE IF ANY RUBBING HAS OCCURRED. NEW BATTERY CABLES WILL BE REPLACED AS NECESSARY. DEALERS WILL ALSO REROUTE THE BATTERY CABLES BETWEEN THE STARTER AND BATTERY BOX USING NEW BRACKETS. THE RECALL BEGAN ON APRIL 20, 2007. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 07501View on NHTSA.gov
04V482000

SUSPENSION:FRONT:CONTROL ARM:LOWER ARM

Oct 7, 2004
20 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCKS,THE LOWER TIE ROD ARMS ON CERTAIN AXLES WERE NOT INDUCTION HARDENED AS REQUIRED BY INTERNATIONAL'S SPECIFICATION.
The risk: WITHOUT THE INDUCTION HARDENING PROCESS BEING PERFORMED, THE TIE ROD ARM MAY FATIGUE DURING THE EXPECTED LIFE OF THE VEHICLE. A FATIGUE FAILURE OF THE TIE ROD ARM MAY RESULT IN A LOSS OF VEHICLE STEERING CONTROL THAT CAN POSSIBLY RESULT IN A VEHICLE CRASH.
The remedy: DEALERS WILL INSPECT AND REPLACE THE LOWER TIE ROD ARMS. THE RECALL BEGAN ON NOVEMBER 19, 2004. OWNERS SHOULD CONTACT INTERNATIONAL TRUCK AND ENGINE AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 04517View on NHTSA.gov
04V100000

EQUIPMENT:RECREATIONAL VEHICLE/TRAILER

Feb 27, 2004
83,312 units potentially affected
The defect: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES.
The risk: THE CIRCUIT BOARDS IN THE SWITCHES COULD HEAT UP , POSSIBLY PRODUCE A FLAME OR FIRE, AND CAUSE PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
The remedy: DEALERS WILL INSTALL A WATER SHIELD OVER THE BACK OF THE ENTIRE BUNK CONTROL PANEL. OWNER NOTIFICATION BEGAN ON JULY 16, 2004. OWNERS SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 04503View on NHTSA.gov
02V265000

STEERING:GEAR BOX:SHAFT SECTOR

Sep 25, 2002
2,129 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCKS, THE JOINT BETWEEN THE LOWER PORTION OF THE STEERING COLUMN AND THE UPPER END OF THE INTERMEDIATE STEERING SHAFT MAY HAVE A MISSING OR LOOSE PINCH BOLT. THIS CONDITION COULD ALSO OCCUR AT THE LOWER END OF THE INTERMEDIATE STEERING SHAFT AT THE STEERING GEAR CONNECTION.
The risk: IF A PINCH BOLT IS MISSING OR VIBRATES LOOSE, THE SHAFT COULD SEPARATE FROM THE STEERING COLUMN OR STEERING GEAR, AND /OR ALLOW SLIPPAGE BETWEEN THE JOINED SHAFTS, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSPECT BOTH ENDS OF THE SHAFT TO ENSURE THE PINCH BOLT IS INSTALLED AND/OR PROPERLY TORQUED. IF THE BOLT AND NUT ARE MISSING, A NEW BOLT, NUT, AND WASHER WILL BE INSTALLED. OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING SEPTEMBER 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources