RoadVitals

2008 International 9900I

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Latest Oct 5, 2009
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2008 International 9900I. 3 safety recalls have been issued covering this model year; and 92 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

3 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
09V386000

ENGINE AND ENGINE COOLING

Oct 5, 2009
9,527 units potentially affected
The defect: NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2008 HEAVY TRUCKS MANUFACTURED BETWEEN APRIL 1, 2003 AND DECEMBER 21, 2007, EQUIPPED WITH CATERPILLAR C15 ENGINES. THE VARIABLE VALVE ACTUATION (VVA) OIL LINE MAY WEAR AGAINST THE P-CLIPS RETAINING THE OIL LINE, CAUSING AN OIL LEAK.
The risk: AN OIL LEAK COULD RESULT IN A FIRE.
The remedy: NAVISTAR IS WORKING WITH CATERPILLAR TO REPAIR THE ENGINES FREE OF CHARGE. PLEASE SEE 09E-020. THE SAFETY RECALL BEGAN ON OCTOBER 23, 2009. OWNERS MAY CONTACT CATERPILLAR AT 1-800-447-4986 OR NAVISTAR AT 1-260-461-1890.
NAVISTAR, INCView on NHTSA.gov
07V180000

FUEL SYSTEM, DIESEL

Apr 24, 2007
700 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH DAVCO FUEL PRO 382 HEATED FUEL FILTERS, WHEN THE KEY IS IN THE 'ON' POSITION, THE PRE-HEATER, LOCATED IN THE FUEL FILTER BASE, IS ENERGIZED.
The risk: IF THIS PRE-HEATER IS ENERGIZED WHILE MAINTENANCE IS BEING PERFORMED ON THE FUEL FILTER, DIESEL FUEL COULD IGNITE WITHIN THE FILTER HOUSING. A FIRE WITHIN THE FUEL FILTER HOUSING MAY SPREAD POSSIBLY RESULTING IN PROPERTY DAMAGE OR PERSONAL INJURY.
The remedy: DEALERS WILL INSPECT THE FUEL FILTERS AND FUEL HEATERS AND, IF NECESSARY, WILL REPLACE THE FUEL HEATER. THE RECALL BEGAN ON MAY 11, 2007. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 07506View on NHTSA.gov
07V179000

SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY

Apr 24, 2007
1,172 units potentially affected
The defect: ON CERTAIN TRUCKS, ONE OR BOTH REAR AXLE HOUSINGS MAY CONTAIN THINNER MATERIAL THAN WHAT IS NECESSARY FOR NORMAL VEHICLE OPERATION. OVER TIME, THIS THINNER MATERIAL MAY RESULT IN A FATIGUE FAILURE OF THE REAR AXLE HOUSING, POSSIBLY IN THE LOCATION OF THE BRAKE FLANGE.
The risk: A CRACK IN THE BRAKE FLANGE LOCATION OF THE REAR AXLE HOUSING MAY RESULT IN A WHEEL END LOCKUP OR WHEEL SEPARATION POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
The remedy: DEALERS WILL INSPECT THE VEHICLE'S REAR AXLES AND, IF NECESSARY, REPLACE THE AXLE HOUSINGS. THE RECALL BEGAN ON MAY 18, 2007. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7815.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 07505View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

IK2600159

ELECTRICAL SYSTEM

There are two ways to program 5000 and 9000 odometer. You can use Intune or Instrument Cluster Program also known as IPC to correctly set the mileage for the odometer.

IK2600090

ENGINE

New CARB Idle Reduction Change Request

IK4300035

ELECTRICAL SYSTEM

This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files. It allows users to quickly load files either manually or directly from the Diamond Logic Builder Vehicles folder using VIN-based selection. As files are added or removed, the comparison runs automatically with no manual action required. The program presents results in an interactive table that shows feature codes, descriptions, access levels, and whether each feature is present in each selected file. Built-in search, filtering, and sorting make it easy to locate specific features or focus only on differences between files. Column visibility can be customized to show or hide descriptions and access information as needed. Users can remove files individually or clear all files at once, with results updating instantly. The tool also includes reporting and export options that reflect exactly what is visible on screen, allowing results to be printed, copied, saved as text, or exported to CSV for use in Excel or other spreadsheet tools. Overall, the program streamlines the process of comparing vehicle feature configurations, helping users quickly identify differences, validate setups, and document results without manual comparison or external tools.

IK2600047

ENGINE

Engine replacements for all International engines will need to follow this procedure.

IK1600272

STRUCTURE:BODY

This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle cabs and windshields using an ultrasonic sound detector.

IK0600030

POWER TRAIN

This document will guide the user through understanding Prop Shaft Codes and understanding the variations of prop codes. (Metric Prop codes start with the number a 4 and Non metric Prop codes start with a 2.)

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

International 9900I by model year
YearComplaintsRecallsInvestigationsIssue Index
2018010—
2017020—
2016010—
2013010—
2008Viewing030—
2007050—
2006130—
2005030—
2004060—
2003280—
2002030—
2001020—
2000040—
1999030—
1998030—
1997020—
1996020—
1995010—
1994000—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.