NHTSA Investigation PE10015

Fuel Tank Leak

In its June 30, 2010 response to ODI's Information Request letter, General Motors (GM) identified the leak source as cracks in either the fuel tank cross-over tube quick connector (connector) and/or the hot-plate weld joint of the connector to the tank.The root causes are attributed to errors in connector material processing, variations in the welding process, and high stresses placed on the driver's side connector during vehicle use.GM also identified the scope of the subject vehicles involved to be those produced from approximately October 22, 2003 through March 19, 2004.GM does not believe the cracks represent an unreasonable risk to motor vehicle safety based on factors that include; low rate of fuel leaking to the ground, detectable fuel odor, the cracks are at the top of the tank, leaks are detectable during refueling, small quantities of fuel that leaks out, and no associated property damage or personal injury claims.On August 13, 2010, GM issued a Special Coverage Adjustment to remedy fuel tank quick connector leaks and extend the warranty for this issue to 10 years or 100,000 miles in certain 2004 Chevrolet Corvette and Cadillac XLR vehicles.Vehicle owners will be notified by mail of the adjustment and will also be entitled to reimbursement for previously paid repairs covered under the adjustment.(See file for, SERVICE BULLETIN 10150: SPECIAL COVERAGE ADJUSTMENT-FUEL TANK QUICK CONNECTOR LEAK).The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency reserves the right to take further action if warranted by the circumstances.

An investigation is a separate record from a recall and from a manufacturer communication. A manufacturer campaign to repair a safety defect or a failure to meet a federal safety standard.