NHTSA safety investigation
NHTSA Investigation PE13024
Preliminary Evaluation · Honda (American Honda Motor Co.) · ELECTRONIC STABILITY CONTROL
An investigation is not a finding that a defect exists.
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
What NHTSA is examining
The agency's own description of the inquiry, quoted as published
Inappropriate autonomous braking
In a letter dated October 31, 2013, Honda Motor Company (Honda) submitted a recall notice to NHTSA's Office of Defects Investigation describing a defect in the Vehicle Stability Assist (VSA) system in approximately 344,187 model year (MY) 2007 and 2008 Honda Odyssey vehicles produced from August 8, 2006 through September 8, 2008 (NHTSA Recall 13V-500, Honda Recall JC5).The report describes a defect condition caused by a combination of VSA system components and software that is unique to the MY 2007-2008 Honda Odyssey vehicles.The condition may result in unexpected brake application by the VSA system with no brake lamp illumination.The braking forces resulting from the condition can approach the maximum braking capability of the vehicle.Honda's investigation determined that (1) if the yaw rate sensor off-set exceeds a certain value, (2) the sensor calibration is not completed before the vehicle starts moving after start-up, and (3) the vehicle is driven in a specific manner; the VSA system may build hydraulic pressure in the brake system resulting in heavy, unexpected braking without the driver applying the brake pedal.Honda estimates that the parts necessary to correct this condition will not be available until March 2014.Pending part availability, Honda will send interim letters to affected owners including instructions to avoid the defect condition using a procedure to ensure proper VSA system calibration after each vehicle start-up, as well as instructions about what to do if unexpected brake application occurs while driving.Once the remedy parts are available, Honda will send a second notice advising owners to bring their vehicle to their dealer for installation of a redesigned yaw rate sensor.This investigation is closed.
An investigation is a separate record from a recall and from a manufacturer communication. A manufacturer campaign to repair a safety defect or a failure to meet a federal safety standard.
Investigation details
Identifiers, dates and outcome as recorded by NHTSA
- Action number
- PE13024
- Investigation type
- Preliminary Evaluation (PE)
- Status
- Closed
- Manufacturer
- Honda (American Honda Motor Co.)
- Component
- ELECTRONIC STABILITY CONTROL
- Opened
- Jun 25, 2013
- Closed
- Nov 4, 2013
- Associated recall campaign
- 13V500000
Vehicles named in this investigation
2 model years across 1 model
Being named here means NHTSA included the vehicle in the scope of its inquiry. It is not a statement that these vehicles have a defect.