NHTSA Investigation PE13031

Electric powertrain propulsion failure

In an October 28, 2013 letter to NHTSA, Ford Motor Company (Ford) submitted a recall notice identifying a defect in the Powertrain Control Module (PCM) software in approximately 2,456 model year (MY) 2012 through 2014 Ford Focus Electric vehicles manufactured from September 15, 2011 through August 23, 2013 (Recall No. 13V-523).According to Ford, PCM software faults may cause a complete loss of powertrain torque.When this condition occurs, drivers receive a red triangle indicator and the message Stop Safely Now in the instrument cluster.In addition, vehicle brake and steering systems will continue to operate normally and the vehicle can be restarted after going through a shutdown process.Ford and its supplier, Magna Powertrain, upgraded the PCM software to address powertrain shutdown conditions and issued a technical service bulletin on September 23, 2013 instructing dealers to reprogram the PCM on all affected vehicles. The Office of Defects Investigation (ODI) analyzed complaint data provided by Ford as well as complaints submitted to ODI from consumers. In total, there were 171 unique reports indicating loss of motive power while driving, and the predominant failure mode identified involved loss of powertrain torque.Ford began owner notification on November 5, 2012.Owners of the recalled vehicles are notified to take their vehicle to a Ford or Lincoln dealer who will reprogram the PCM to the latest calibration. See the investigative public file for copies of Ford's bulletin and owner letter.This preliminary evaluation is closed.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers (ODI Nos.): 10536160,10534988,10534323,10531894,10525393,10525187,10523536,10521207,10516270,10512459,10512146,10509307,10543015,10542983,10542840,10542753,10538223,10537801,10537111,10537048,10536894,10536592,10536538,10536510,10526350,10524026,10522585,10521986,10521459,10519446,10545282.

An investigation is a separate record from a recall and from a manufacturer communication. A manufacturer campaign to repair a safety defect or a failure to meet a federal safety standard.