NHTSA Investigation PE17006

Seat belt latch failure

Through Early Warning Reporting (EWR) data review of 2016 Q1-Q3, several field reports were found that identified failures of seat belt latch casings on MY 2016 Van Hool motorcoaches.While reviewing the EWR data related to the latch issue, ODI was contacted by the National Transportation Safety Board (NTSB) regarding seat belt latch issues they discovered while investigating a crash between a train and a 2016 Van Hool bus in Biloxi, Mississippi.Through inspections of buses similar to the bus involved in the crash, the NTSB found that casing failures were occurring on seat belt latches manufactured by Fasching Salzburg.These concerns were forwarded to ODI suggesting the latch casing failures may be a wide spread problem found on MY 2016 Van Hool buses.As a result of the information provided by the NTSB along with the related EWR field reports, ODI opened a defect investigation (PE17-006) on the subject vehicles. The intent of the investigation was to better understand if there was a safety related defect involving the latches.During the investigation ODI reviewed warranty claims submitted by VAN Hool and found that many identified situations where passengers could not get the seat belt buckles to latch or in some case unlatch.This presented a situation where passengers were either unrestrained during a potential crash or could not get out of their seats to exit the vehicle in a potential emergency.With recall action 18V-209 taken by Van Hool this investigation is closed.Further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.

An investigation is a separate record from a recall and from a manufacturer communication. A manufacturer campaign to repair a safety defect or a failure to meet a federal safety standard.