NHTSA Investigation RQ98005

AUTOMATIC TRANSMISSION CONTROL

ON SEPTEMBER 4, 1997, FORD FILED A DEFECT INFORMATION REPORT CONCERNING APPROXIMATELY 15,000 1997 MODEL YEAR F-150 TRUCKS, MANUFACTURED FROM FEBRUARY 16 THROUGH MARCH 4, 1996, AND BUILT AT THE NORFOLK OR KANSAS CITY ASSEMBLY PLANTS.THESE VEHICLES COULD HAVE INCORRECTLY MANUFACTURED AUTOMATIC TRANSMISSION CONTROL CABLES INSTALLED WHICH CAN RESULT IN A SEPARATION OF THE CABLE END FITTING FROM THE CABLE CONDUIT AT THE TRANSMISSION END OF THE CABLE.IF THE TRANSMISSSION END FITTING WERE TO SEPARATE FROM THE SHIFT CABLE ASSEMBLY, THEOPERATOR WOULD NOT BE ABLE TO SHIFT THE TRANSMISSION FROM ONE OF THE DRIVE GEAR POSITIONS INTO THE PARK POSITION EVEN THOUGH THE GEAR SHIFT SELECTOR WOULD INDICATE PARK.ODI HAS RECEIVED 6 REPORTS ALLEGING TRANSMISSION FAULT SHIFTING RESULTING IN 3 CRASHES.THE REPORTED VEHICLES WERE IDENTIFIED AS FOLLOWS:THREE WERE MANUACTURED OUTSIDE OF THE RECALL BUILD DATES; TWO WERE WITHIN THE SCOPE OF THE RECALL AND THE REMAINING VEHICLE WAS UNKNOWN DUE TO MISSING VIN.THE PURPOSE OF THIS INVESTIGATION IS TO EXAMINE THE SCOPE OF RECALL 97V-147, IN PARTICULAR, THE BASIS FOR LIMITING THE RECALL TO THOSE BUILT WITHIN A SPECIFIC TIME PERIOD AND WHETHER THE CABLE IS USED ON OTHER FORD VEHICLES.

An investigation is a separate record from a recall and from a manufacturer communication. A manufacturer campaign to repair a safety defect or a failure to meet a federal safety standard.