RoadVitals

2010 Itasca Navion Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Dec 3, 2012
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

12V559000

ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS

Dec 3, 2012
2,495 units potentially affected
The defect: Winnebago is recalling certain model year 2009-2013 model Era motorhomes, 2010-2013 Via and Itasca Reyo motorhomes, and 2011-2013 View and Itasca Navion motorhomes; manufactured November 13, 2007, through August 20, 2012. The proper fuses were not installed for the refrigerator circuits.
The risk: Without the proper fuse, heat can build which could lead to a vehicle fire.
The remedy: Winnebago will notify owners, and dealers will replace the fuses. The recall began on December 21, 2012. Consumers may contact Winnebago Industries owner relations at 1-641-585-6939.
WINNEBAGO INDUSTRIES INC.Manufacturer number 127View on NHTSA.gov
10V470000

SEAT BELTS

Oct 5, 2010
2,496 units potentially affected
The defect: WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2011 WINNEBAGO VIEW AND ITASCA NAVION MOTOR HOMES BECAUSE THE DINETTE AREA SEAT BELT RESTRAINTS ON THOSE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." IN A COLLISION, THE GENERATED CRASH FORCES CAN CAUSE THE RESTRAINT'S ATTACHMENT TO TEAR AND ALLOW THE ANCHOR TO SEPARATE FROM THE BODY OF THE VEHICLE.
The risk: IF THE RESTRAINT SEPARATES FROM THE VEHICLE DURING A CRASH, THE BELT WILL NOT PROPERLY RESTRAIN THE SEAT OCCUPANT, INCREASING THE RISK OF INJURY OR DEATH TO THE OCCUPANT.
The remedy: WINNEBAGO WILL ADD ADDITIONAL SEAT BELT ANCHORAGES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 12, 2010. OWNERS MAY CONTACT WINNEBAGO AT 1-800-537-1885.
WINNEBAGO INDUSTRIES, INC.Manufacturer number 118View on NHTSA.gov
10V248000

SEATS

Jun 1, 2010
252 units potentially affected
The defect: WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2010 VIEW, VIEW PROFILE, ITASCA NAVION, AND NAVION IQ MOTOR HOMES MANUFACTURED FROM APRIL 27, 2009 THROUGH JANUARY 21, 2010. THESE VEHICLES MAY HAVE A MISSING BOLT IN THE DRIVER AND/OR PASSENGER SEATS.
The risk: IF A BOLT IS MISSING, THE SEAT AND/OR SEAT BELT MAY NOT FUNCTION AS DESIGNED IN THE EVENT OF A CRASH, INCREASING THE RISK OF INJURY OR DEATH.
The remedy: DEALERS WILL CHECK FOR THE EXISTENCE AND TORQUE OF THE SEAT BOLTS AND INSTALL AND/OR REPLACE AS NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 30, 2010. OWNERS MAY CONTACT WINNEBAGO AT 641-585-6939.
WINNEBAGO INDUSTRIES, INC.Manufacturer number 116View on NHTSA.gov
09V500000

SEATS

Dec 30, 2009
12 units potentially affected
The defect: WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2010 VIEW AND ITASCA NAVION MOTOR HOMES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS," AND FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY." THE SEATS ARE MISSING A REINFORCING PLATE.
The risk: THIS DOES NOT MEET THE REQUIREMENTS OF THE STANDARD.
The remedy: DEALERS WILL REMOVE THE SWIVEL AND INSTALL A NEW DESIGN OF SWIVEL THAT DOES NOT REQUIRE A REINFORCING PLATE IN ORDER TO MEET THE STANDARD. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 15, 2010. OWNERS MAY CONTACT WINNEBAGO AT 1-800-537-1885.
WINNEBAGO INDUSTRIES, INC.Manufacturer number 114View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources