RoadVitals

1985 Jeep Wagoneer Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Jul 1, 1988
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
4 investigations on file

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

88V106000

SERVICE BRAKES, HYDRAULIC:POWER ASSIST:HYDRAULIC

Jul 1, 1988
1,600 units potentially affected
The defect: BRAKE BOOSTER VACUUM RESERVOIR CANISTERS MAY DEVELOP LEAKS DUE TO BUMPER IMPACT.
The risk: THIS WOULD RESULT IN LOSS OF POWER BRAKE ASSIST AND ANINCREASE IN STOPPING DISTANCE.
The remedy: REPLACE BRAKE BOOSTER VACUUM CANNISTERS WITH NEW TYPE CANNISTERS; ALSO, INSTALL A RESTRICTION ORIFICE TO ENSURE SUFFICIENT VACUUM IN EVENT CANNISTER LEAKAGE OCCURS.
CHRYSLER CORPORATIONView on NHTSA.gov
84V122000

STEERING: STEERING WHEEL/HANDLE BAR

Oct 30, 1984
265 units potentially affected
The defect: IMPROPERLY TIGHTENED BOLT ON STEERING SHAFT ALLOWS THE CONNECTOR ON THE SHAFT TO SLIP. STEERING MOVEMENTS WILL NOT BE TRANSMITTED TO THE GEAR BOX.
The remedy: THE VEHICLE WILL BE INSPECTED AND THE UPPER PINCH BOLT WILL BE TIGHTENED IF NECESSARY AT NO CHARGE TO OWNER.
CHRYSLER CORPORATIONView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE89151ClosedPreliminary Evaluation

SAFETY BELT RETRACTOR

Opened Aug 11, 1989
Closed Dec 11, 1989

===

SEAT BELTS:FRONT:RETRACTOR
EA88009ClosedEngineering Analysis

ENGINE COMPARTMENT FIRES

Opened Nov 16, 1987
Closed Jan 9, 1990

ANALYSIS:MANY OF THE REPORTS INDICATE THAT THE PLASTIC VALVE COVER OR THE\TV GASKETING MATERIAL LOSES ITS STRUCTURAL AND/OR SEALING INTEGRITY DUE TOTHE HIGH ENGINE TEMPERATURES ASSOCIATED WITH THE AMC 258 ENGINE.TESTINGPERFORMED BY A LOCAL FLEET CLEARLY DEMONSTRATED THAT UNDER NORMAL DRIVINGCONDITIONS, MOTOR OIL LEAKS IN THE VICINITY OF THE #3 OR #4 CYLINDERS (OVERTHE EXHAUST MANIFOLD) CAN RESULT IN A FIRE SERIOUS ENOUGH TO DESTROY AVEHICLE.AMC HAS ISSUED NUMEROUS TSB'S REGARDING THE PROPER/IMPROPER METHOD OF SEAL-ING THE VALVE COVER-HEAD INTERFACE.1981-84 AMC 6-CYLINDER ENGINES AREEQUIPPED WITH A PLASTIC VALVE COVER WHICH HAS 5 GUIDE PINS AND 2 FASTENERS.THE COVER USED IN LATER MODELS WAS RE-DESIGNED TO HAVE 5 ATTACHING POINTS,AND THIS NEW VALVE COVER CAN BE USED ON OLDER ENGINES BY MEANS OF AMODIFICATION KIT.AS EXPECTED, COMPLAINTS OF ENGINE FIRES IN 1985 MODELSDROPPED SIGNIFICANTLY, INDICATING THAT THE ADDITION OF THE NEW VALVE COVERMAY HAVE SOLVED THE PROBLEM.STATUS: IR TO THE MANUFACTURER SENT 12/1/87.PROPOSED ACTION: OPEN AN ENGINEERING ANALYSIS.===

ENGINE AND ENGINE COOLING:ENGINELed to recall 88V132000
PE88001ClosedPreliminary Evaluation

FIRES CAUSED BY CLTCH LK

Opened Oct 23, 1987
Closed Jan 28, 1988

NO SAFETY DEFECT TREND HAS BEEN DETECTED.===

POWER TRAIN
DP87022ClosedDefect Petition

REAR WINDOW

Opened Jul 14, 1987
Closed Oct 23, 1987

REAR WINDOW

VISIBILITY

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .