RoadVitals

2021 Kenworth T800B

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
5
Latest Dec 9, 2024
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2021 Kenworth T800B. 5 safety recalls have been issued covering this model year; and 25 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

5 campaigns cover this model year

View all 5

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
24V915000

ELECTRICAL SYSTEM:SOFTWARE; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

Dec 9, 2024
220,764 units potentially affected
The defect: PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.
The risk: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.
The remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWL and 24PBL.
PACCAR IncorporatedManufacturer number 24KWL 24PBLView on NHTSA.gov
23V717000

SEAT BELTS

Oct 26, 2023
3,841 units potentially affected
The defect: PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T660, 2018-2024 Kenworth T800 and W900 vehicles. An additional spacer may have been added to the joint that connects the seat to the seat belt tether and buckle, causing an unsecured connection.
The risk: An unsecured seat belt connection may not properly restrain an occupant during a crash, increasing their risk of injury.
The remedy: Dealers will inspect and remove the additional spacer and replace the bolt, as necessary, free of charge. Owner letters were mailed March 20, 2024. Owners may contact PACCAR's customer service at 1-425-828-5888. PACCAR's number for this recall is 23KWK.
PACCAR IncorporatedManufacturer number 23KWKView on NHTSA.gov
21V391000

FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL

May 26, 2021
612 units potentially affected
The defect: PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
The risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
The remedy: Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.
PACCAR IncorporatedManufacturer number 21KWC, 21PBDView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

45-070

ENGINE

The attached procedures document has been updated with more detail and explanations. This is not a stand-alone procedure. Cummins Quickserve troubleshooting will specify the use of these procedures while troubleshooting specific fault codes.

14-034

Bogie Crossmember Torque Value Update - Procedure has been updated to correct torque values.

45-070

ENGINE

Procedure pictures updated for clarity. When troubleshooting Cummins X15 fault codes 555 or 556, follow this additional testing, inspection, and documentation procedure to help identify the root cause of dusted engines. This is not a stand-alone process but must be used alongside Cummins troubleshooting steps. Cummins Quickserve will reference this bulletin for fault codes 555 or 556.

24KWD

SERVICE BRAKES, AIR

Certain C500/T440/T470/T660/T680/T800/T880/W900 chassis may have air tank reservoirs that do not meet air volume requirements per FMVSS/CMVSS 121 “Air Brake Systems”. This bulletin will be updated when repair parts and procedures are available.

23KWK

EQUIPMENT; SEAT BELTS; SEATS

Safety Recall Repair parts and procedures are now available. On certain Kenworth model years 2018 through 2024 C500/T660/T800/W900 trucks with Sears Atlas 70 or 80 series seats, a spacer was installed on the seatbelt mounting assembly. In a severe collision, the ICP bar may fail, increasing the risk of injury.

23KWK

SEAT BELTS; SEATS

Safety Recall Interim Notification On certain Kenworth model year 2018 through 2024 C500/T660/T800/W900 trucks with Sears Atlas 70 or 80 series seats, an additional spacer was installed on the seatbelt mounting assembly. In a severe collision, the ICP bar may fail allowing the seatbelt to slip, increasing the risk of injury. This bulletin will be updated when repair parts and procedures become available.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Kenworth T800B by model year
YearComplaintsRecallsInvestigationsIssue Index
2025010—
2024010—
2023050—
2022050—
2021Viewing050—
2000100—
1996100—
1995000—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.