RoadVitals

2024 Kenworth W900B

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Dec 9, 2024
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2024 Kenworth W900B. 1 safety recall has been issued covering this model year; and 5 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
24V915000

ELECTRICAL SYSTEM:SOFTWARE; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

Dec 9, 2024
220,764 units potentially affected
The defect: PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.
The risk: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.
The remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWL and 24PBL.
PACCAR IncorporatedManufacturer number 24KWL 24PBLView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

43-089

ENGINE

This optional software update is expected to be available on 08/07/26 for chassis equipped with EPA 2024 EMY 2024-2026 PACCAR MX-11 and MX-13 engines. This update provides customers with additional time to service their trucks before a DEF-related derate occurs. The software is being offered to customers in alignment with recently updated regulatory agency guidance.

43-087

(KW) Certain T680 / T800 / T880 / W900 / W990 have updated GHG labels available for order and installation. (PB) Certain Model 367 / 389 / 567 / 579 / 589 have updated GHG labels available for order and installation.

14-034

Bogie Crossmember Torque Value Update - Procedure has been updated to correct torque values.

45-070

ENGINE

Procedure pictures updated for clarity. When troubleshooting Cummins X15 fault codes 555 or 556, follow this additional testing, inspection, and documentation procedure to help identify the root cause of dusted engines. This is not a stand-alone process but must be used alongside Cummins troubleshooting steps. Cummins Quickserve will reference this bulletin for fault codes 555 or 556.

43-076

FUEL/PROPULSION SYSTEM

Certain vehicle model years 2020-2025 K270, K370, T270, T280, T370, T380, T480, T680, T880, W900 chassis have updated Greenhouse Gas (GHG) labels available for installation.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Kenworth W900B by model year
YearComplaintsRecallsInvestigationsIssue Index
2025010—
2024Viewing010—
2023010—
2022010—
2021010—
1997100—
1996100—
1995000—
1993010—
1992010—
1991030—
1990030—
1989020—
1988010—
1987020—
1986020—
1985020—
1984010—
1983010—
1982010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.