RoadVitals

1977 Mack Cf Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
8
Newest May 1, 1991
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

8 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

91V070000

STEERING:LINKAGES

May 1, 1991
3,673 units potentially affected
The defect: STRESSES IMPOSED ON THE LEVER DURING TURNING MANEUVERS AND/OR IMPACT INCIDENTS, SUCH AS WOULD BE CAUSED BY CURBS OR ROAD SURFACE IRREGULARITY, REDUCE THE LIFE EXPECTANCY OF THE PART. THE STEERING LEVER MAY CRACK AND EVENTUALLY THE STRESSES COULD CAUSE THE STEERING LEVER TO BREAK.
The risk: A BROKEN STEERING LEVER WILL CAUSE LOSS OF STEERINGCONTROL WITHOUT PRIOR WARNING WHICH MAY RESULT IN A VEHICLE CRASH.
The remedy: REPLACE THE DEFECTIVE STEERING ARMS.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov
85V157000

STEERING: STEERING WHEEL/HANDLE BAR

Nov 26, 1985
143 units potentially affected
The defect: THE SPLINED STEERING SHAFT MAY NOT BE SUFFICIENTLY ENGAGED AS DESIGNED DUE TO INACCURATE DRILLING OF THE HOLES IN THE FRAME TO WHICH THE CAB FRONT MOUNT MEMBER IS BOLTED. UNDER CERTAIN CONDITIONS THE STEERING SHAFT MAY DISENGAGE. CONSEQUENCE OF DEFECT: A JARRING IMPACT MIGHT CAUSE DISENGAMENT OF THE SPLINED SHAFT RESULTING IN LOSS OF STEERING CONTROL AND POSSIBLY AN ACCIDENT.
The remedy: REPLACE SHAFTS WHICH MEASURE UNDER THE MINIMUM ENGAGEMENT DIMENSIONS WITH LONGER SHAFT.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov
83V037000

STEERING: STEERING WHEEL/HANDLE BAR

Apr 5, 1983
1,455 units potentially affected
The defect: ON THE INVOLVED VEHICLES THE FLOORBOARD OPENING AND THE STEERING COLUMN SEAL BRACKET DO NOT HAVE SUFFICIENT CLEARANCE TO ALLOW THE SHAFT TO TURN FREELY. THIS CAUSES THE PINCH BOLT TO BIND OR LOCK AGAINST THE SEAL BRACKET.
The remedy: THE HOLE IN THE FLOORBOARD WILL BE ENLARGED TO ALLOW SUFFICIENT CLEARANCE OF THE STEERING COLUMN U-JOINT PINCH BOLT, AND A NEW BRACKET AND LAMP WILL BE INSTALLED AT NO CHARGE TO OWNER.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov
81V154000

STEERING: STEERING WHEEL/HANDLE BAR

Dec 29, 1981
826 units potentially affected
The defect: THE FLOORBOARD OPENING AND THE STEERING COLUMN SEAL BRACKET MAY NOT ALLOW SUFFICIENT CLEARANCE FOR THE SHAFT TO TURN FREELY IN THE CENTER OF THE BRACKET/SEAL. THE PINCH BOLT IN THE COLUMN YOKE MAY BIND OR LOCK THE COLUMN AGAINST THE BRACKET, ALLOWING LITTLE OR NO WHEEL RETURN.
The remedy: DEALER WILL ENLARGE THE HOLE IN THE FLOORBOARD TO PROVIDE CLEARANCE FOR THE STEERING COLUMN U-JOINT PINCH BOLT. A NEW BRACKET AND CLAMP WILL ALSO BE INSTALLED WITHOUT CHARGE TO OWNER.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov
78V172000

STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM

Aug 8, 1978
13,800 units potentially affected
The defect: THE EXISTING CROSS STEERING ARMS MAY HAVE INSUFFICIENT FATIGUE LIFE IN THE NECK AREA. THIS IS NEAR THE BOSS FOR THE CROSS STEERING TUBE BALL JOINT CONNECTION. FAILURE OF EITHER OF THE CROSS STEERING LEVERS COULD LEAD TO LOSS OF STEERING CONTROL OF THE RIGHT FRONT WHEEL.
The remedy: THE DEALER WILL INSPECT AND, IF NECESSARY, INSTALL CROSS STEERING ARMS OF IMPROVED DESIGN AND GREATER STRENGTH.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov
77V173000

ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Oct 12, 1977
48,000 units potentially affected
The defect: THE FLEX BLADE FANS ON THE INVOLVED VEHICLES MAY DEVELOP CRACKS IN THE LAMINATED STIFFENER AS A RESULT OF FATIGUE DURING OPERATION. IF SUCH A CONDITION EXISTS AND THE CRACKS GO UNDETECTED, CONTINUED OPERATION COULD CAUSE PIECES OF THE STIFFENER TO BREAK OFF.
The remedy: DEALER WILL REPLACE THE ORIGINAL FAN WITH A STEEL FIXED BLADE FAN, FREE OF CHARGE.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov
77V174000

SEAT BELTS:FRONT:ANCHORAGE

Oct 12, 1977
6,591 units potentially affected
The defect: THE INVOLVED VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEATBELT ASSEMBLIES". ALTHOUGH THE SEATBELTS IN QUESTION PERFORMED MARGINALLY WITH RESPECT TO THE 5000 LB. LOAD REQUIREMENT, ADDITIONAL TESTING CONFIRMED THAT THE ANCHOR COULD FAIL, ALLOWING EITHER THE ANCHOR TO SLIP OVER THE HOLD-DOWN NUT OR THE ANCHOR TO SEPARATE INTO TWO PIECES.
The remedy: DEALER WILL INSPECT AND, IF NECESSARY, REPLACE SEAT BELT ASSEMBLIES WITHOUT CHARGE TO OWNER.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov
77V096000

WHEELS

Jun 17, 1977
825 units potentially affected
The defect: THE FRONT WHEEL RIM CLAMP STUDS, INSTALLED ON THE INVOLVED VEHICLES, MAY NOT HAVE BEEN MANUFACTURED CORRECTLY, CAUSING A BRITTLE CONDITION IN THE THREAD ROOT AREA. THE STUDS COULD EVENTUALLY CRACK AND BREAK WHEN WHEEL NUTS ARE TIGHTENED TO SPECIFICATIONS.
The remedy: THE DEALER WILL REPLACE ALL SUSPECT FRONT WHEEL STUDS, WITHOUT CHARGE TO OWNER.
MACK TRUCKS, INCORPORATEDView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources