RoadVitals

2004 Mack Cv Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
6
Newest Mar 3, 2010
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

6 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

10V069000

POWER TRAIN:AXLE ASSEMBLY

Mar 3, 2010
15,490 units potentially affected
The defect: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2002 THROUGH 2004 CL, CV, LE, MR, RB, RD, AND MODEL YEAR 2003 THROUGH 2004 DM HEAVY TRUCKS MANUFACTURED FROM FEBRUARY 1, 2002 THROUGH SEPTEMBER 30, 2003, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE. THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS.
The risk: THESE LINES, IF PRESENT, CAN PROMOTE INITIATION OF CRACKS, WHICH OVER TIME MAY POSSIBLY LEAD TO AXLE BEAM FAILURE AND A VEHICLE CRASH CAN OCCUR.
The remedy: MACK WILL NOTIFY OWNERS, INSPECT AND REPLACE ANY AFFECTED AXLE BEAMS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 5, 2010. OWNERS MAY CONTACT MACK AT 1-800-866-1177.
MACK TRUCKS, INCManufacturer number SC0341View on NHTSA.gov
09V240000

POWER TRAIN:AXLE ASSEMBLY

Jun 30, 2009
10,300 units potentially affected
The defect: MACK IS RECALLING 10,300 MODEL YEAR 2004 AND 2005 CL, CV, DM, LE, AND RB AND MODEL YEAR 2004 RD HEAVY TRUCKS MANUFACTURED FROM OCTOBER 1, 2003 THROUGH SEPTEMBER 30, 2004, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE. THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS.
The risk: THESE LINES, IF PRESENT, CAN PROMOTE INITIATION OF CRACKS, WHICH OVER TIME MAY POSSIBLY LEAD TO AXLE BEAM FAILURE AND A VEHICLE CRASH CAN OCCUR.
The remedy: MACK WILL NOTIFY OWNERS, INSPECT AND REPLACE ANY AFFECTED AXLE BEAMS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 14, 2009. OWNERS MAY CONTACT MACK AT 1-800-866-1177.
MACK TRUCKS, INCManufacturer number SC0341View on NHTSA.gov
07V361000

SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Aug 15, 2007
21,847 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH PARKER SINGLE CHECK VALVES (SCV) PROVIDED BY BENDIX. THE DEFECT EXISTS IN THE PARKER SCV THAT CONNECTS WITH THE SUPPLY PORT OF THE SR-7 SPRING BRAKE MODULATING VALVE. AFTER PROLONGED USE OF THE PARKER SCV, THE VALVE BODY RETAINER MAY BECOME EXCESSIVELY WORN AND EVENTUALLY BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE.
The risk: THIS CONDITION CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON. THESE CONDITIONS CAN OCCUR WITHOUT WARNING, LEADING TO UNINTENDED VEHICLE ROLLAWAY, BRAKE DRAG, OR IN THE CASE OF LOSS OF PRIMARY CIRCUIT, INABILITY TO MODULATE THE SPRING BRAKES.
The remedy: MACK IS WORKING WITH BENDIX TO REPLACE THE PARKER SINGLE CHECK VALVE. THE RECALL BEGAN ON JANUARY 9, 2008. OWNERS MAY CONTACT BENDIX AT 1-440-329-9000 OR MACK AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0334View on NHTSA.gov
05V312000

SUSPENSION

Jul 7, 2005
100 units potentially affected
The defect: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH HOLLAND AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTING MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION'S TRANSVERSE BEAM MAY DROP DOWN LOW ENOUGH TO CONTACT THE ROAD SURFACE.
The risk: THIS WILL CAUSE SPARKS THAT COULD POTENTIALLY IGNITE AND CAUSE A FIRE.
The remedy: DEALERS WILL INSPECT AND REPLACE THE DEFECTIVE TRANSVERSE BEAM ASSEMBLIES. THE RECALL BEGAN ON AUGUST 19, 2005. OWNERS MAY CONTACT MACK TRUCKS AT 610-709-2131.
MACK TRUCKS, INCManufacturer number SC0300 AND SC301View on NHTSA.gov
05V118000

STEERING

Mar 29, 2005
127 units potentially affected
The defect: ON CERTAIN HEAVY-DUTY, CLASS 8 TRUCKS, THE LOWER AND UPPER STEERING SHAFT PINCH BOLTS WERE IMPROPERLY TIGHTENED.
The risk: AS A RESULT OF THIS CONDITION, THE STEERING SHAFT COULD POSSIBLY COME LOOSE WHICH COULD LEAD TO A SUDDEN LOSS OF VEHICLE CONTROL, WHICH COULD RESULT IN A CRASH.
The remedy: DEALERS WILL INSPECT THE TORQUE AT THE SUSPECT JOINTS, AND CORRECT IF NECESSARY FREE OF CHARGE. THE RECALL BEGAN ON MAY 5, 2005. OWNERS MAY CONTACT MACK AT 1-610-709-2131.
MACK TRUCKS, INCManufacturer number SCO295View on NHTSA.gov
04V118000

SERVICE BRAKES, AIR:DISC:CHAMBER

Mar 4, 2004
35 units potentially affected
The defect: CERTAIN TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE FRONT BRAKE CHAMBER ON SOME 18,000 LB. AND 20,000 LB FRONT AXLE ASSEMBLIES IS TOO SMALL TO MEET STOPPING DISTANCE REQUIREMENTS.
The risk: THIS COULD CAUSE THE STOPPING DISTANCE TO BE INCREASED, WHICH COULD RESULT IN A CRASH.
The remedy: DEALERS WILL REPLACE THE FRONT BRAKE CHAMBERS. THE RECALL BEGAN APRIL 21, 2004. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MACK AT 1-610-709-3337.
MACK TRUCKS, INCManufacturer number SC0286View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources