RoadVitals

2006 Mack Cxn Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
13
Newest Dec 23, 2008
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

13 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

08V688000

EXTERIOR LIGHTING:HEADLIGHTS:SWITCH

Dec 23, 2008
34,269 units potentially affected
The defect: MACK IS RECALLING 34,269 MY 1999-2005 CX AND MY 2004-2008 CXN TRUCKS. THE HEADLIGHT SWITCH MAY PREMATURELY FAIL RESULTING IN INOPERATIVE OR INTERMITTENT HEADLIGHTS.
The risk: THE HEAD LIGHTS MAY NOT OPERATE PROPERLY WHICH COULD RESULT IN INTERMITTENT OR NO HEADLIGHT FUNCTION. THIS COULD IMPAIR A DRIVER'S VISIBILITY, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REPLACE THE HEADLIGHT SWITCH. THE RECALL BEGAN ON FEBRUARY 27, 2009. OWNERS MAY CONTACT MACK AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0342View on NHTSA.gov
07V497000

TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

Oct 23, 2007
950 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH A SAF HOLLAND SIMPLEX FIFTH WHEEL, THE LEVER ARM PIVOT BOLT MAY HAVE BEEN OVER TIGHTENED. AN OVER TIGHTENED PIVOT BOLT CAN DISTORT THE PIVOT BOLT SPACER SLEEVE, WHICH MAY PREVENT THE FIFTH WHEEL LATCH JAW FROM CLOSING AND LATCHING SECURELY AROUND THE TRAILER KING PIN.
The risk: THERE IS A POSSIBILITY THAT THE PIVOT BOLT CAN BECOME LOOSE WITHOUT THE DRIVER'S KNOWLEDGE. WHEN THIS OCCURS, THE DRIVER COULD DRIVE AWAY AND THE TRAILER COULD BECOME DISENGAGED, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REPLACE THE PIVOT BOLT AND SLEEVE WITH A HEX HEAD SHOULDER BOLT AND WASHER FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 28, 2008. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0331View on NHTSA.gov
07V401000

FUEL SYSTEM, DIESEL

Sep 5, 2007
35,649 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH ASET AC MODEL ENGINES, THE ENGINE AS CONFIGURED WITH AN EXTERNAL EXHAUST GAS RECIRCULATION SYSTEM MAKES SERVICING THE FUEL INJECTION LINES DIFFICULT WHEN USING TRADITIONAL TOOLS. THEREFORE, IT IS POSSIBLE FOR FUEL LEAKS TO DEVELOP WHEN REMOVING AND INSTALLING THE FUEL INJECTION LINES.
The risk: A LEAK IN THE FUEL INJECTION LINE MAY SPRAY FUEL ON THE HOT SURFACES OF THE EXHAUST GAS RECIRCULATION SYSTEM, WHICH COULD RESULT IN AN ENGINE FIRE.
The remedy: DEALERS WILL REPLACE THE FUEL INJECTION LINES FREE OF CHARGE. NOTE: THIS RECALL SUPERSEDES A PREVIOUS CAMPAIGN CONDUCTED IN 2006 (PLEASE SEE 06V392). THE RECALL BEGAN ON SEPTEMBER 11, 2007, WITH SUBSEQUENT MAILINGS EVERY SIX WEEKS UNTIL APRIL 2008. OWNERS MAY CONTACT MACK AT 800-528-6586.
MACK TRUCKS, INCManufacturer number SC0324View on NHTSA.gov
07V361000

SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Aug 15, 2007
21,847 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH PARKER SINGLE CHECK VALVES (SCV) PROVIDED BY BENDIX. THE DEFECT EXISTS IN THE PARKER SCV THAT CONNECTS WITH THE SUPPLY PORT OF THE SR-7 SPRING BRAKE MODULATING VALVE. AFTER PROLONGED USE OF THE PARKER SCV, THE VALVE BODY RETAINER MAY BECOME EXCESSIVELY WORN AND EVENTUALLY BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE.
The risk: THIS CONDITION CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON. THESE CONDITIONS CAN OCCUR WITHOUT WARNING, LEADING TO UNINTENDED VEHICLE ROLLAWAY, BRAKE DRAG, OR IN THE CASE OF LOSS OF PRIMARY CIRCUIT, INABILITY TO MODULATE THE SPRING BRAKES.
The remedy: MACK IS WORKING WITH BENDIX TO REPLACE THE PARKER SINGLE CHECK VALVE. THE RECALL BEGAN ON JANUARY 9, 2008. OWNERS MAY CONTACT BENDIX AT 1-440-329-9000 OR MACK AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0334View on NHTSA.gov
07V360000

PARKING BRAKE

Aug 15, 2007
18,805 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.
The risk: THIS COULD DELAY OR FAILURE IN APPLYING THE PARKING BRAKES WHICH COULD RESULT IN A VEHICLE ROLL AWAY, INCREASING THE RISK OF A CRASH.
The remedy: MACK IS WORKING WITH BENDIX TO REPAIR THESE VEHICLES (PLEASE SEE 07E037). BENDIX WILL INSTALL A CHECK VALVE REPAIR KIT FOR THE AFFECTED SR-7 SPRING BRAKE MODULATING VALVE FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 10, 2008. OWNERS MAY CONTACT BENDIX AT 1-440-329-9000 OR MACK AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0335View on NHTSA.gov
06V392000

FUEL SYSTEM, DIESEL

Oct 13, 2006
40,204 units potentially affected
The defect: ON CERTAIN TRUCKS, A LEAK IN THE ASET AC FUEL INJECTION LINE MAY SPRAY FUEL ON THE EXHAUST GAS RECIRCULATION PIPES THAT CARRY HOT EXHAUST GASES .
The risk: THIS COULD POTENTIALLY RESULT IN AN ENGINE FIRE.
The remedy: MACK HAS ISSUED A STOP WORK ON THIS CAMPAIGN UNDER FURTHER NOTICE (2-22-2007). THE REMEDY DOES NOT ADEQUATELY ADDRESS THE ISSUE ON ALL VEHICLES. MACK WILL RE-RELEASE THE RECALL IN THE NEAR FUTURE. (PLEASE SEE NHTSA NO. 07V159/MACK RECALL NO. SCO323 FOR VEHICLES THAT HAVE HAD THIS REPAIR ALREADY PERFORMED.) THIS RECALL HAS BEEN SUPERSEDED (PLEASE SEE 07V401/SC0324).
MACK TRUCKS, INCManufacturer number SC0317View on NHTSA.gov
06V290000

FUEL SYSTEM, DIESEL

Aug 3, 2006
342 units potentially affected
The defect: ON CERTAIN TRUCKS, THE FUEL LINE CROSSOVER BRACKET MAY PREMATURELY FAIL AND UNEXPECTEDLY FALL TO THE ROAD. THE LOCATION AND SIZE OF THE BRACKET DRAWS A CONCERN TO THE BRACKET BEING PICKED UP AND THROWN BY THE DRIVE AXLE WHEELS.
The risk: IF THE CROSSOVER BRACKET FALLS A CRASH MAY OCCUR WITHOUT PRIOR NOTICE.
The remedy: DEALERS WILL REPLACE THE BRACKETS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 20, 2006. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0311View on NHTSA.gov
05V442000

SERVICE BRAKES, AIR

Sep 26, 2005
1,408 units potentially affected
The defect: ON CERTAIN VEHICLES, THE BRAKE CAM TUBES ON THE STEER AND DRIVE AXLES MAY NOT HAVE BEEN GREASED.
The risk: THE BRAKE CAM JOURNAL MAY CORRODE WHICH COULD LEAD TO THE BRAKES DRAGGING. THIS COULD RESULT IN A VEHICLE FIRE.
The remedy: DEALERS WILL ADD GREASE TO THE BRAKE CAM TUBES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 24, 2005. OWNERS MAY CONTACT MACK AT 1-336-393-2233.
MACK TRUCKS, INCManufacturer number SC0307View on NHTSA.gov
05V441000

SERVICE BRAKES, AIR

Sep 26, 2005
1,433 units potentially affected
The defect: ON CERTAIN VEHICLES, THE BRAKE CAM TUBES ON THE STEER AND DRIVE AXLES MAY NOT HAVE BEEN GREASED.
The risk: THE BRAKE CAM JOURNAL MAY CORRODE WHICH COULD LEAD TO THE BRAKES DRAGGING. THIS COULD RESULT IN A VEHICLE FIRE.
The remedy: DEALERS WILL REMOVE THE BRAKE CAMSHAFT TO INSPECT FOR CORROSION. THE BRAKE CAMSHAFT WILL BE REPLACED AS REQUIRED FREE OF CHARGE. THE RECALL BEGAN ON FEBRUARY 27, 2006. OWNERS MAY CONTACT MACK AT 1-336-393-2233.
MACK TRUCKS, INCManufacturer number SC0306View on NHTSA.gov
05V439000

SERVICE BRAKES, AIR

Sep 26, 2005
2,679 units potentially affected
The defect: ON CERTAIN VEHICLES. THE BRAKE CAM TUBES ON THE DRIVE AXLE MAY NOT HAVE BEEN GREASED.
The risk: THE BRAKE CAM JOURNAL MAY CORRODE WHICH COULD LEAD TO THE BRAKES DRAGGING. THIS COULD RESULT IN A VEHICLE FIRE.
The remedy: DEALERS WILL REMOVE THE BRAKE CAMSHAFT TO INSPECT FOR CORROSION. THE BRAKE CAMSHAFT WILL BE REPLACED AS REQUIRED FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 18, 2006. OWNERS MAY CONTACT MACK AT 1-336-393-2233.
MACK TRUCKS, INCManufacturer number SC0305View on NHTSA.gov
05V438000

SERVICE BRAKES, AIR

Sep 26, 2005
2,582 units potentially affected
The defect: ON CERTAIN VEHICLES, THE BRAKE CAM TUBES ON THE STEER AXLE MAY NOT HAVE BEEN GREASED.
The risk: THE BRAKE CAM JOURNAL MAY CORRODE WHICH COULD LEAD TO THE BRAKES DRAGGING. THIS COULD RESULT IN A VEHICLE FIRE.
The remedy: DEALERS WILL REMOVE THE BRAKE CAMSHAFT TO INSPECT FOR CORROSION. THE BRAKE CAMSHAFT WILL BE REPLACED AS REQUIRED FREE OF CHARGE. THE RECALL BEGAN ON FEBRUARY 27, 2006. OWNERS MAY CONTACT MACK AT 1-336-393-2233.
MACK TRUCKS, INCManufacturer number SC0304View on NHTSA.gov
05V178000

STEERING

Apr 28, 2005
2,773 units potentially affected
The defect: ON CERTAIN HEAVY DUTY CLASS 8 VEHICLES BUILT WITH SHEPPARD MODEL M100 STEERING GEAR, THE STEERING GEAR MOUNTING PADS, WHICH ATTACH THE STEERING GEAR TO THE FRAME RAIL, MAY FAIL.
The risk: THE STEERING GEAR COULD LOOSEN LEADING TO A SUDDEN LOSS OF STEERING, WHICH COULD RESULT IN A CRASH.
The remedy: DEALERS WILL REPLACE THE STEERING GEARS. THE RECALL BEGAN ON MAY 6, 2005. OWNERS MAY CONTACT MACK AT 1-610-709-2131.
MACK TRUCKS, INCManufacturer number SC0298View on NHTSA.gov
05V184000

WHEELS

Apr 22, 2005
58 units potentially affected
The defect: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH ACCURIDE ALUMINUM WHEELS, THE WHEELS WERE NOT PROPERLY PRE-STRESSED. THIS ALLOWS CRACKS TO DEVELOP OVER TIME.
The risk: THIS MAY EVENTUALLY LEAD TO WHEEL FAILURE AND POSSIBLY RESULT IN A VEHICLE CRASH.
The remedy: DEALERS WILL REPLACE THE WHEELS FREE OF CHARGE. THE RECALL BEGAN ON JUNE 17, 2005. OWNERS MAY CONTACT MACK TRUCKS AT 610-709-2131.
MACK TRUCKS, INCManufacturer number SC0297View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA09009ClosedEngineering Analysis

AIR BRAKE SYSTEM CONTROL VALVES

Opened Jun 18, 2009
Closed Aug 13, 2010

INVESTIGATION HAS NOT IDENTIFIED A DEFECT.COMPLAINTS HAVE ABATED.SEE CLOSING REPORT FOR FURTHER DETAILS.

SERVICE BRAKES, AIR
PE09010ClosedPreliminary Evaluation

AIR BRAKE CONTROL VALVE

Opened Feb 13, 2009
Closed Jun 18, 2009

ODI IS CLOSING THIS PRELIMINARY EVALUATION AND OPENING AN ENGINEERING ANALYSIS (EA09-009) TO FURTHER IDENTIFY AND EVALUATE THE VEHICLE ENVIRONMENT AND BRAKE SYSTEM FACTORS THAT MAY BE CAUSING OR CONTRIBUTING TO EXTENDED STOPPING DISTANCE PERFROMANCE IN CERTAIN VEHICLES.

SERVICE BRAKES, AIR:CONTROLS

Elsewhere on this vehicle

Data sources