RoadVitals

2014 Mack Granite (gu) Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
13
Newest Dec 15, 2025
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

13 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

25V867000

SERVICE BRAKES, AIR:DISC:CHAMBER

Dec 15, 2025
679 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain 2010-2016 Granite (GU) trucks. Vehicles remedied under Recall 15V804 (SC0398) may have had incorrect parts installed during subsequent repairs. The incorrect parts may cause a brake imbalance between the steer and drive axle brakes and the rear brakes to overheat.
The risk: Overheated brakes may cause a tire blowout or fire, increasing the risk of a crash.
The remedy: Dealers will inspect and replace the brake chambers as necessary, free of charge. Owner letters were mailed April 14, 2026. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0491. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning December 22, 2025. Owners who received a remedy under Recall 15V804 (SC0398) must have the new remedy completed.
Mack Trucks, Inc.Manufacturer number SC0491View on NHTSA.gov
16V929000

SUSPENSION:FRONT:HUB

Dec 23, 2016
200 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.
The risk: Overloaded front wheel hubs can result in premature failure of the hubs, bearings, and the related components, which can cause the front hub assembly to separate from the front axle. Because of this, the driver may lose control of the vehicle or parts may be dropped on the road, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will replace the hub assemblies, free of charge. The recall began on February 16, 2017. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0406.
Mack Trucks, Inc.Manufacturer number SC0406View on NHTSA.gov
16V099000

POWER TRAIN:DRIVELINE:DRIVESHAFT

Feb 19, 2016
33,981 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.
The risk: If he cap nut loosens and falls off, the yoke can separate from the axle input shaft and allow the drive shaft to disconnect, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will replace the cap nut. The input shaft threads will be inspected for damage. Any damaged input shaft will be replaced. These repairs will be performed free of charge. An interim notice was sent to owners on April 25, 2016. The recall began on June 7, 2016. Owners may contact Mack customer service at 1-610-709-2131. Mack's recall campaign number for this recall is SC0399.
Mack Trucks, Inc.Manufacturer number SC0399View on NHTSA.gov
15V804000

SERVICE BRAKES, AIR:DISC:CHAMBER

Nov 30, 2015
679 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2010-2016 Granite 4X2 trucks manufactured September 17, 2009, to July 31, 2015. Due to a brake imbalance between the steer and drive axle brakes, the rear brakes may overheat.
The risk: If the rear brakes overheat there would be an increased risk of a tire blowout or a wheel-end fire.
The remedy: Mack will notify owners, and dealers will replace either the brake chambers on the steer axles or the drive axles to correct the imbalance, free of charge. The recall began on January 27, 2016. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0398.
Mack Trucks, Inc.Manufacturer number SC0398View on NHTSA.gov
15V702000

ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER

Oct 26, 2015
2,571 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2010-2016 Granite (GU), LR, and TerraPro (LEU, MRU) trucks manufactured November 17, 2009 to October17, 2015. The affected trucks have engines with a turbocharger oil supply line that may contact or interfere with the turbocharger inlet elbow, clean air intake clamp, or the air fuel control tube, and result in an oil leak.
The risk: If the turbocharger oil supply line oil leaks in the proximity of the engine exhaust manifold there would be an increased risk of a fire.
The remedy: Cummins will notify owners on behalf of Mack, and dealers will inspect for oil supply line interference or damage, eliminating the interference and replacing the oil supply line, as necessary, free of charge. The recall is expected to begin November 30, 2015. Owners may contact Cummins at 1-800-343-7357 or Mack customer service at 1-800-866-1177. Cummins' number for this recall is SC0396.
Mack Trucks, Inc.Manufacturer number SC0396View on NHTSA.gov
15V690000

POWER TRAIN:AXLE ASSEMBLY

Oct 22, 2015
8 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2014 Granite (GU) trucks manufactured January 1, 2013, to October 16, 2013, and equipped with certain drive axles manufactured by Marmon-Herrington. The affected axles are equipped with hex nuts on the flange yoke that may not have been properly tightened.
The risk: If the hex nuts are not tightened to specification, the driveshaft may disconnect from the drive axle, resulting in a loss of propulsion and increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will inspect the hex nut, tightening it to proper torque, free of charge. The recall is expected to begin on November 30, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0397.
Mack Trucks, Inc.Manufacturer number SC0397View on NHTSA.gov
15V528000

SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK

Aug 18, 2015
84 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2016 Granite (GU) trucks manufactured September 24, 2011, to July 1, 2015. The affected trucks may be equipped with an air brake system reservoir that does not have a sufficient volume. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
The risk: If the air brake system reservoir has as insufficient volume, braking performance may be affected, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will add additional air brake reservoir volume, free of charge. The recall began on October 15, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0394.
Mack Trucks, Inc.Manufacturer number SC0394View on NHTSA.gov
15V522000

ELECTRICAL SYSTEM:WIRING; SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS

Aug 17, 2015
62 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2013 and 2015 Titan (TD), model year 2014 and 2015 Pinnacle (CHU), and model years 2009-2010, 2012, and 2014-2016 Granite (GU) trucks. The chassis harness and air lines may not be properly clipped to the crossmember, which can allow the cables and air lines to fall and get twisted in the driveline.
The risk: If the electrical cables and air lines were to fall and get tangled in the driveline, it could affect the electrical system and braking system, increasing the risk of a vehicle crash.
The remedy: Mack will notify owners, and dealers will inspect the vehicles and properly clip the harness and air lines, free of charge. The recall began on September 30, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0393.
Mack Trucks, Inc.Manufacturer number SC0393View on NHTSA.gov
14V208000

EXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT

Apr 18, 2014
44,047 units potentially affected
The defect: Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.
The risk: A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. The recall will begin by mid-June 2014. Interim letters went out to owners on June 23, 2014. The recall began on July 25, 2014. Owners may contact Mack customer service at 1-866-298-6586. Mack's number for this recall is SC0379.
Mack Trucks, Inc.Manufacturer number SC0379View on NHTSA.gov
14V078000

ELECTRICAL SYSTEM

Feb 21, 2014
70,208 units potentially affected
The defect: Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.
The risk: Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.
The remedy: Mack has notified owners, and dealers will inspect the EPDM. If contamination has occurred, dealers will replace the EPDM and address the leak, free of charge. Owners of model year 2010-2012 CHU, CXU, GU and TD vehicles were initially notified April 24, 2014. Owners affected by the recall expansions were notified in February 2015. Owners may contact Mack Trucks at 1-336-393-2000. Mack's number for this recall is SC0375.
Mack Trucks, Inc.Manufacturer number SC0375View on NHTSA.gov
13V492000

POWER TRAIN:AXLE HUBS

Oct 17, 2013
1,155 units potentially affected
The defect: Mack Trucks is recalling certain model year 2013-2014 CHU, CXU, GU, LEU, and MRU vehicles manufactured with pro-torque axle spindle nuts from August 28, 2012, through August 16, 2013. The pro-torque nut may not have been installed correctly, which may result in a loosening of the nut.
The risk: If the nut comes loose, the hub assembly may separate from the vehicle, increasing the risk of a crash.
The remedy: Mack Trucks will notify owners, and dealers will inspect and repair the vehicles, as necessary, free of charge. The recall began on November 12, 2013. Mack's recall number is SC0371. Owners may contact Mack Trucks at 1-336-393-2000.
Mack Trucks, Inc.Manufacturer number SC0371View on NHTSA.gov
13V493000

STEERING

Oct 17, 2013
535 units potentially affected
The defect: Mack Trucks is recalling certain model year 2014 CXU and GU model vehicles manufactured May 10, 2013, through June 12, 2013. The upper and lower steering shaft pinch bolts may have not been torqued to specification. This may cause the steering shaft to come loose.
The risk: A loose steering shaft would result in a loss of steering control, increasing the risk of a crash.
The remedy: Mack Trucks will notify owners, and dealers will inspect the steering shaft pinch bolts and retorque them as necessary, free of charge. The recall began on December 11, 2013. Mack's recall number is SC0372. Owners may contact Mack Trucks at 1-336-393-2000.
Mack Trucks, Inc.Manufacturer number SC0372View on NHTSA.gov
13V195000

SERVICE BRAKES

May 13, 2013
5,203 units potentially affected
The defect: Mack Trucks, Inc. is recalling certain model year 2013-2014 CHU, CXU, GU, MRU, and LEU trucks manufactured July 16, 2012, through march 18, 2013 and equipped with drum brakes. The clevis pin for the brake slack adjuster may be missing a cotter pin. If the cotter pin is not installed, the clevis pin may loosen and fall out causing a loss of brake function on the affected wheel.
The risk: A loss of brake function at one wheel will lead to increased stopping distances and pulling to the left or right when braking, which may increase the risk of a crash.
The remedy: Mack Trucks, Inc. will notify owners, and dealers will inspect the brake slack adjusters and install the brake hardware, as necessary, free of charge. An interim was mailed to owners on June 20, 2013. A second notice was mailed to owners on September 30, 2013. Owners may contact Mack Trucks at 1-800-528-6586. Mack Trucks' recall campaign number is SC0370.
Mack Trucks, Inc.Manufacturer number SC0370View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources