RoadVitals

2007 Mack Mr Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Mar 26, 2008
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

08V144000

SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Mar 26, 2008
218 units potentially affected
The defect: MACK IS RECALLING 218 MY 2006-2007 MR TRUCKS. A CHECK VALVE WAS OMITTED FROM THE SECONDARY SUPPLY PORT OF THE SR-7 SPRING BRAKE MODULATING VALVE.
The risk: AS A RESULT, AN AIR LEAK IN THE SECONDARY OR PRIMARY SYSTEM MAY RESULT IN THE PARK BRAKES INADVERTENTLY APPLYING, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL ADD A CHECK VALVE TO THE SECONDARY SUPPLY PORT OF THE SR-7 SPRING BRAKE MODULATING VALVE AND WILL ALSO REPAIR THE SR-7 VALVE BY APPLYING A CHECK VALVE REPAIR KIT AS REQUIRED FOR THE BENDIX SAFETY RECALL (PLEASE SEE 07E-037). THE RECALL BEGAN ON APRIL 15, 2008. OWNERS MAY CONTACT MACK AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0337View on NHTSA.gov
07V360000

PARKING BRAKE

Aug 15, 2007
18,805 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.
The risk: THIS COULD DELAY OR FAILURE IN APPLYING THE PARKING BRAKES WHICH COULD RESULT IN A VEHICLE ROLL AWAY, INCREASING THE RISK OF A CRASH.
The remedy: MACK IS WORKING WITH BENDIX TO REPAIR THESE VEHICLES (PLEASE SEE 07E037). BENDIX WILL INSTALL A CHECK VALVE REPAIR KIT FOR THE AFFECTED SR-7 SPRING BRAKE MODULATING VALVE FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 10, 2008. OWNERS MAY CONTACT BENDIX AT 1-440-329-9000 OR MACK AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0335View on NHTSA.gov
06V232000

PARKING BRAKE:CONVENTIONAL:AIR

Jun 28, 2006
2,587 units potentially affected
The defect: ON CERTAIN TRUCKS EQUIPPED WITH SR-7 BENDIX BRAKE VALVES, THE CHECK VALVE INSIDE THE VALVE CAVITY MAY NOT PROPERLY SET, CAUSING INTERNAL AIR LEAKAGE. IF THE CHECK VALVE DOES NOT PROPERLY SEAT, THE RESULTING LEAKAGE CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER OPERATOR PULLS THE DASH VALVE BUTTON.
The risk: THE DELAYED PARKING BRAKE APPLICATION CAN OCCUR WITHOUT WARNING, LEADING TO UNINTENDED VEHICLE ROLLAWAY INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSPECT THE VALVES AND REPLACE IT FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 14, 2006. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
MACK TRUCKS, INCManufacturer number SC0336View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA09009ClosedEngineering Analysis

AIR BRAKE SYSTEM CONTROL VALVES

Opened Jun 18, 2009
Closed Aug 13, 2010

INVESTIGATION HAS NOT IDENTIFIED A DEFECT.COMPLAINTS HAVE ABATED.SEE CLOSING REPORT FOR FURTHER DETAILS.

SERVICE BRAKES, AIR
PE09010ClosedPreliminary Evaluation

AIR BRAKE CONTROL VALVE

Opened Feb 13, 2009
Closed Jun 18, 2009

ODI IS CLOSING THIS PRELIMINARY EVALUATION AND OPENING AN ENGINEERING ANALYSIS (EA09-009) TO FURTHER IDENTIFY AND EVALUATE THE VEHICLE ENVIRONMENT AND BRAKE SYSTEM FACTORS THAT MAY BE CAUSING OR CONTRIBUTING TO EXTENDED STOPPING DISTANCE PERFROMANCE IN CERTAIN VEHICLES.

SERVICE BRAKES, AIR:CONTROLS

Elsewhere on this vehicle

Data sources