RoadVitals

1995 Mazda Protege Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
5
Newest Oct 19, 2015
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

5 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

15V674000

ELECTRICAL SYSTEM:IGNITION:SWITCH

Oct 19, 2015
1,368,500 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
The risk: If the ignition switch overheats there would be an increased risk of a fire.
The remedy: Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.
Mazda North American OperationsManufacturer number 8715JView on NHTSA.gov
09E012000

EXTERIOR LIGHTING

Apr 7, 2009
16,270 units potentially affected
The defect: SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
The risk: DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
The remedy: SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
SABERSPORTView on NHTSA.gov
00V118000

EXTERIOR LIGHTING:HEADLIGHTS:SWITCH

Apr 21, 2000
76,000 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE HEADLIGHT LEAD WIRE RUNNING THROUGH THE TURN SIGNAL LEVER CAN FAIL AT THE SOLDERED CONNECTION TO THE HEADLIGHT SWITCH.
The risk: THE FAILURE OF THE WIRE CONNECTION CAN CAUSE A LOSS OF HEADLIGHTS WITHOUT PRIOR WARNING.
The remedy: DEALERS WILL REPAIR THE HEADLIGHT SWITCH.
MAZDA NORTH AMERICAN OPERATIONSView on NHTSA.gov
95V184000

AIR BAGS

Oct 3, 1995
51,817 units potentially affected
The defect: THE TIE DOWN HOOKS CAN CAUSE UNDERCARRIAGE IMPACTS THAT CAN RESULT IN UNNECESSARY AIR BAG DEPLOYMENTS.
The risk: INADVERTENT AIR BAG DEPLOYMENT CAN CAUSE INJURY TO THE OCCUPANTS AND INCREASE THE POTENTIAL FOR A VEHICLE ACCIDENT.
The remedy: DEALERS WILL REMOVE AND REPLACE THE TIE DOWN HOOKS WITH MODIFIED TIE DOWN HOOKS.
MAZDA (NORTH AMERICA),INCView on NHTSA.gov
95V033000

ENGINE AND ENGINE COOLING:ENGINE

Feb 21, 1995
5,760 units potentially affected
The defect: THE WIRE ROD USED IN THE MANUFACTURE OF THE ENGINE VALVE SPRINGS CAN DEVELOP MINUTE CRACKS CAUSING BREAKAGE OF THE SPRINGS.
The risk: THIS BREAKAGE CAN CAUSE ENGINE CHATTER, DAMAGE TO THE ENGINE PISTONS, AND CAUSE THE ENGINE TO STALL INCREASING THE POTENTIAL FOR AN ACCIDENT.
The remedy: DEALERS WILL REPLACE ALL SIXTEEN (16) VALVE SPRINGS IN THE ENGINE OF THE AFFECTED VEHICLES.
MAZDA (NORTH AMERICA),INCView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA99029ClosedEngineering Analysis

HEADLIGHT WIRE BREAKAGE

Opened Sep 30, 1999
Closed May 10, 2000

IN ITS LETTER DATED APRIL 21, 2000, MAZDA STATED THAT IT WILL CONDUCT A SAFETY RECALL OF APPROXIMATELY 79,000 MODEL YEAR 1995 AND 1996 MAZDA PROTEGE VEHICLES BUILT FROM JUNE 1994 THROUGH JULY 1995.MAZDA DEALERS WILL REPAIR THE HEADLIGHT SWITCH ASSEMBLE

VISIBILITYLed to recall 00V118000
PE99038ClosedPreliminary Evaluation

LOSS OF HEADLIGHTS

Opened May 20, 1999
Closed Sep 30, 1999

BASED ON THE REVIEW OF MAZDA'S INVESTIGATION AND TESTING, EXAMINATION OF TWO FAILED FIELD UNITS (A HEADLIGHT SWITCH AND A COMBINATION SWITCH), AND TELEPHONE INTERVIEWS OF SEVERAL COMPLAINANTS, IT APPEARS THAT THE HEADLIGHT LEAD WIRE WHICH IS ATTACHED TO AND LOCATED JUST BELOW THE TURN SIGNAL LEVER, CAN BE STRESSED FROM CYCLING THE TURN SIGNAL LEVER AND RESULT IN FATIGUE BREAKAGE OF THE WIRE.COMPLAINTS STATED THAT THE HEADLIGHTS WENT OFF DURINGOPERATION IN MODEL YEAR (MY) 1995 PROTEGE VEHICLES WHEN USING THE TURN SIGNAL AND/OR WHILE JUST DRIVING (E.G., GOING OVER A SMALL BUMP).SEVERAL COMPLAINANTS CONTACTED BY ODI STATED THAT SOMETIMES THE HEADLIGHTS DID NOT COME BACK ON AFTER GOING OFF UNTIL THE DRIVER SUCCESSFULLY JIGGLED THE TURN SIGNAL LEVER OR THE HEADLIGHT WIRE HARNES (I.E., RE-MAKE ELECTRICAL CONNECTION OF A PARTIALLY BROKEN WIRE).PERMANENT LOSS OF HEADLIGHTS CAN OCCUR WHEN THE WIRE IS COMPLETELY BROKEN.IN JULY 1995, ABOUT THE START OF MY 1996 PRODUCTION, MAZDA CHANGED THE MATERIAL OF THE HEADLIGHT LEAD WIRE TO INCREASE DURABILITY.NO SIMILAR COMPLAINTS ON MY 1996 PROTEGE VEHICLES HAVE BEEN REPORTED TO ODI OR MAZDA.

EXTERIOR LIGHTING

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .